Rakesh K. Joshi

Masamichi  Yoshimura

Kazuyuki  Ueda

Surface Nanoscience

The most common fabrication technique of porous silicon (PS) is electrochemical etching of a crystalline silicon wafer in a hydrofluoric (HF) acid-based solution. The electrochemical process allows for precise control of the properties of PS such as thickness of the porous layer, porosity, and average pore diameter. The control of these properties of PS was shown to depend on the HF concentration in the used electrolyte, the applied current density, and the thickness of PS. The change in pore diameter, porosity, and specific surface area of PS was investigated by measuring nitrogen sorption isotherms.

Pushpendra Kumar

Patrick Huber

Effect of Etching Parameter on Pore Size and Porosity of Electrochemically Formed Nanoporous Silicon

<mml:math id="E1" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mtext>In</mml:mtext><mml:mn>2</mml:mn></mml:msub><mml:msub><mml:mtext>O</mml:mtext><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math> and <mml:math id="E2" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mrow><mml:mtext>In</mml:mtext></mml:mrow><mml:mn>2</mml:mn></mml:msub><mml:msub><mml:mtext>O</mml:mtext><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>:Ag nanoparticle layers have been deposited using a two-step method consisting of chemical capping and dip coating techniques. The result of optical absorption analysis of <mml:math id="E3" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mrow><mml:mtext>In</mml:mtext></mml:mrow><mml:mn>2</mml:mn></mml:msub><mml:msub><mml:mtext>O</mml:mtext><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>:Ag samples shows the presence of <mml:math id="E4" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mrow><mml:mtext>Ag</mml:mtext></mml:mrow><mml:mn>2</mml:mn></mml:msub><mml:mtext>O</mml:mtext></mml:mrow></mml:math> and Ag in air-annealed and vacuum-annealed samples, respectively. These results have been correlated with the gas sensing properties of these layers towards ethanol and support the proposed mechanism that increase in sensor response on Ag addition is due to the conversion of <mml:math id="E5" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mrow><mml:mtext>Ag</mml:mtext></mml:mrow><mml:mn>2</mml:mn></mml:msub><mml:mtext>O</mml:mtext></mml:mrow></mml:math> to Ag in the presence of ethanol.

Vidya Nand Singh

Bodh Raj Mehta

Rakesh Kumar Joshi

Frank Einar Kruis

Effect of Silver Addition on the Ethanol-Sensing Properties of Indium Oxide Nanoparticle Layers: Optical Absorption Study

Mixed nanoparticle films of SnO1.8: Ag prepared by the gas phase condensation method using an aerosol route have been used for the detection of CO and CH4. Particle size as estimated by transmission electron microscopy is 20 nm for both SnO1.8 and Ag nanoparticles. The gas-sensing behavior of the films for these gases has been studied in detail as a function of Ag concentration in the films. A study has been made in order to distinguish the size effect and specific surface area effect in the ethanol gas-sensing behavior of SnO1.8: Ag mixed nanoparticle films. This distinction, which has not been possible using the traditional methods of the sensor fabrication, gives evidence of the dominance of size effect of the metal dopant over the surface area effect in the gas sensing of the films. The sensors show also an increased sensor signal with increase of Ag concentration in the films for CO and CH4. It is observed from the comparative study of the sensing behavior of SnO1.8: Ag films for CO and CH4 that the sensors are more sensitive towards CO as compared to CH4. The mixed nanoparticle films were also used for the detection of CO at 100 ppm level.

Size-Selected SnO1.8: Ag Mixed Nanoparticle Films for Ethanol, CO, and CH4 Detection

Single-walled carbon nanotubes (SWCNTs) were prepared by a modified arc discharging furnace using Fe-Ni-Mg powders as catalyst at <mml:math id="E1" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msup><mml:mrow><mml:mn>600</mml:mn></mml:mrow><mml:mo>∘</mml:mo></mml:msup><mml:mtext>C</mml:mtext></mml:mrow></mml:math>. The effects of catalyst composition and content on the production rate and purity of SWCNTs are investigated in this paper. When the Fe-Ni-Mg catalyst composition is 2: 1: 2 <mml:math id="E2" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mtext>wt</mml:mtext><mml:mi>%</mml:mi></mml:mrow></mml:math> and the catalyst content is 5 <mml:math id="E3" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mtext>wt</mml:mtext><mml:mi>%</mml:mi></mml:mrow></mml:math>, the experimental results indicate that the production of SWCNTs is 12 grams per hour, and the purity and diameter of SWCNTs are <mml:math id="E4" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mn>70</mml:mn><mml:mi>%</mml:mi></mml:mrow></mml:math> and 1.22 <mml:math id="E5" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mo>∼</mml:mo></mml:math>1.38 nm, respectively. The results indicate that the cooperative function of catalyst composition and content plays an important role in the production of SWCNTs. The aim of this work is to control the production process of SWCNTs efficiently.

Tingkai Zhao

Qinghu Tang

Yongning Liu

Changchun Zhu

Xiang Zhao

Catalyst Composition and Content Effects on the Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge

A 55 nm samarium film capped with a 10 nm palladium overlayer switched from a metallic reflecting to a semiconducting, transparent in visible state during ex-situ hydrogen loading via electrochemical means in 1 M KOH electrolytic aqueous solution at room temperature. The switching between metal to semiconductor was accompanied by measurement of transmittance during hydrogen loading/unloading. The effect of current density on switching and thermodynamic properties was studied between dihydride state (FCC phase) and trihydride state (hexagonal phase). From the plateau of partial pressure of hydrogen at <mml:math id="E1" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>x</mml:mi><mml:mo>=</mml:mo><mml:mn>2.6</mml:mn></mml:mrow></mml:math>, enthalpy of formation was calculated at different current densities. The diffusion coefficients 
 and switching kinetics are shown to depend on applied current density.

L. K. Malhotra

Effect of Current Density on Thermodynamic Properties of Nanocrystalline Palladium Capped Samarium Hydride Thin Film Switchable Mirrors

Creation of controlled and reproducible nanostructures on material surfaces using scanning tunneling microscope is a novel technique, which can be used for a variety of applications. We have examined the shape of the nanostructures so formed on the gold film using tungsten tip and examined the formation parameters, which govern their shape and size. During our investigations it is found that the reproducibility of mound formation can reach up to 90<mml:math id="E1" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>%</mml:mi></mml:math> under optimum operating conditions, whereas the pit formation can be made with almost 100<mml:math id="E2" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>%</mml:mi></mml:math> reproducibility. Formation mechanism of such nanostructures is also discussed.

Subhashis Gangopadhyay

Asit Kumar Kar

Balbir Kumar Mathur

Shape of Field-Induced Nanostructures Formed by STM

About this journal

Journal of Nanomaterials publishes research on nanoscale and nanostructured materials with an emphasis on synthesis, processing, characterization, and the applications of nanomaterials.

Journal profile

Meet the editorial board

Chief Editor Stefano Bellucci is Professor of Theoretical Physics at the National Institute for Nuclear Physics in Frascati, Italy. His research interests include&nbsp;nanoscience and nanotechnology, nanocarbon-based composites, and the biomedical applications of nanomaterials.

Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Special Issues

Author guidelines

Editorial board

Databases and indexing

title

Journal of Nanomaterials publishes research on nanoscale and nanostructured materials with an emphasis on synthesis, processing, characterization, and the applications of nanomaterials.

description

https://images.hindawi.com/journals/jnm/jnm.banner.jpg

twitter:card

twitter:description

twitter:site

twitter:title

twitter:url

twitter:image

Journal of Nanomaterials | Hindawi

Journal of Nanomaterials

This Issue is now open for submissions.
Papers are published upon acceptance, regardless of the Special Issue publication date.

Journal of Nanomaterials

Surface Nanoscience

Surface Nanoscience

Articles