- About this Journal ·
- Abstracting and Indexing ·
- Advance Access ·
- Aims and Scope ·
- Annual Issues ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
Journal of Nanotechnology
Volume 2012 (2012), Article ID 620309, 7 pages
Functional Conducting Polymers in the Application of SPR Biosensors
1Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand
2Center for Transdisciplinary Research, Graduate School of Science and Technology, Niigata University, Niigata 950-2181, Japan
3Materials Science Research Center, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand
Received 20 February 2012; Accepted 21 May 2012
Academic Editor: Carlos R. Cabrera
Copyright © 2012 Rapiphun Janmanee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
- N. K. Guimard, N. Gomez, and C. E. Schmidt, “Conducting polymers in biomedical engineering,” Progress in Polymer Science, vol. 32, no. 8-9, pp. 876–921, 2007.
- A. Baba, S. Tian, F. Stefani et al., “Electropolymerization and doping/dedoping properties of polyaniline thin films as studied by electrochemical-surface plasmon spectroscopy and by the quartz crystal microbalance,” Journal of Electroanalytical Chemistry, vol. 562, no. 1, pp. 95–103, 2004.
- J. C. Vidal, E. Garcia-Ruiz, and J. R. Castillo, “Recent advances in electropolymerized conducting polymers in amperometric biosensors,” Microchimica Acta, vol. 143, no. 2-3, pp. 93–111, 2003.
- F. S. Damos, R. C. S. Luz, and L. T. Kubota, “Investigations of ultrathin polypyrrole films: formation and effects of doping/dedoping processes on its optical properties by electrochemical surface plasmon resonance (ESPR),” Electrochimica Acta, vol. 51, no. 7, pp. 1304–1312, 2006.
- B. Adhikari and S. Majumdar, “Polymers in sensor applications,” Progress in Polymer Science, vol. 29, no. 7, pp. 699–766, 2004.
- Y. Wang and W. Knoll, “In situ electrochemical and surface plasmon resonance (SPR) studies of aniline-carboxylated aniline copolymers,” Analytica Chimica Acta, vol. 558, no. 1-2, pp. 150–157, 2006.
- S. Toyama, K. Aoki, and S. Kato, “SPR observation of adsorption and desorption of water-soluble polymers on an Au surface,” Sensors and Actuators, B, vol. 108, no. 1-2, pp. 903–909, 2005.
- M. Şenel and C. Nergiz, “Novel amperometric glucose biosensor based on covalent immobilization of glucose oxidase on poly(pyrrole propylic acid)/Au nanocomposite,” Current Applied Physics, vol. 12, no. 4, pp. 1118–1124, 2012.
- M. Zhou and J. Heinze, “Electropolymerization of pyrrole and electrochemical study of polypyrrole: 1. Evidence for structural diversity of polypyrrole,” Electrochimica Acta, vol. 44, no. 11, pp. 1733–1748, 1999.
- K. Shinbo, A. Baba, F. Kaneko et al., “In situ investigations on the preparations of layer-by-layer films containing azobenzene and applications for LC display devices,” Materials Science and Engineering C, vol. 22, no. 2, pp. 319–325, 2002.
- M. Singh, P. K. Kathuroju, and N. Jampana, “Polypyrrole based amperometric glucose biosensors,” Sensors and Actuators, B, vol. 143, no. 1, pp. 430–443, 2009.
- H. Dong, X. Cao, C. M. Li, and W. Hu, “An in situ electrochemical surface plasmon resonance immunosensor with polypyrrole propylic acid film: comparison between SPR and electrochemical responses from polymer formation to protein immunosensing,” Biosensors and Bioelectronics, vol. 23, no. 7, pp. 1055–1062, 2008.
- J. J. Gooding, C. Wasiowych, D. Barnett, D. B. Hibbert, J. N. Barisci, and G. G. Wallace, “Electrochemical modulation of antigen-antibody binding,” Biosensors and Bioelectronics, vol. 20, no. 2, pp. 260–268, 2004.
- J. W. Lee, F. Serna, J. Nickels, and C. E. Schmidt, “Carboxylic acid-functionalized conductive polypyrrole as a bioactive platform for cell adhesion,” Biomacromolecules, vol. 7, no. 6, pp. 1692–1695, 2006.
- R. Schweiss, J. F. Lübben, D. Johannsmann, and W. Knoll, “Electropolymerization of ethylene dioxythiophene (EDOT) in micellar aqueous solutions studied by electrochemical quartz crystal microbalance and surface plasmon resonance,” Electrochimica Acta, vol. 50, no. 14, pp. 2849–2856, 2005.
- R. D. Webster, “In situ electrochemical-ATR-FTIR spectroscopic studies on solution phase 2,4,6-tri-substituted phenoxyl radicals,” Electrochemistry Communications, vol. 5, no. 1, pp. 6–11, 2003.
- R. D. Webster, R. A. W. Dryfe, J. C. Eklund, C. W. Lee, and R. G. Compton, “In situ electrochemical ESR studies of reactive radicals: the reductions of bromo-anthraquinone and methyl viologen,” Journal of Electroanalytical Chemistry, vol. 402, no. 1-2, pp. 167–174, 1996.
- R. Kurita, K. Nakamoto, A. Ueda, and O. Niwa, “Comparison of electrochemical and surface plasmon resonance immunosensor responses on single thin film,” Electroanalysis, vol. 20, no. 20, pp. 2241–2246, 2008.
- R. Kurita, Y. Yokota, A. Ueda, and O. Niwa, “Electrochemical surface plasmon resonance measurement in a microliter volume flow cell for evaluating the affinity and catalytic activity of biomolecules,” Analytical Chemistry, vol. 79, no. 24, pp. 9572–9576, 2007.
- W. Knoll, “Interfaces and thin films as seen by bound electromagnetic waves,” Annual Review of Physical Chemistry, vol. 49, no. 1, pp. 569–638, 1998.
- A. Baba and W. Knoll, “Properties of poly(3,4-ethylenedioxythiophene) ultrathin films detected by in situ electrochemical-surface plasmon field-enhanced photoluminescence spectroscopy,” The Journal of Physical Chemistry B, vol. 107, no. 31, pp. 7733–7738, 2003.
- K. Kato, K. Yamashita, Y. Ohdaira, A. Baba, K. Shinbo, and F. Kaneko, “Electrochemical surface plasmon excitation and emission light properties in poly(3-hexylthiophene) thin films,” Thin Solid Films, vol. 518, no. 2, pp. 758–761, 2009.
- S. Tian, A. Baba, J. Liu et al., “Electroactivity of polyaniline multilayer films in neutral solution and their electrocatalyzed oxidation of β-nicotinamide adenine dinucleotide,” Advanced Functional Materials, vol. 13, no. 6, pp. 473–479, 2003.
- J. C. C. Yu and E. P. C. Lai, “Polypyrrole film on miniaturized surface plasmon resonance sensor for ochratoxin A detection,” Synthetic Metals, vol. 143, no. 3, pp. 253–258, 2004.
- Y. Shao, Y. Jin, J. Wang, L. Wang, F. Zhao, and S. Dong, “Conducting polymer polypyrrole supported bilayer lipid membranes,” Biosensors and Bioelectronics, vol. 20, no. 7, pp. 1373–1379, 2005.
- W. Hu, C. M. Li, and H. Dong, “Poly(pyrrole-co-pyrrole propylic acid) film and its application in label-free surface plasmon resonance immunosensors,” Analytica Chimica Acta, vol. 630, no. 1, pp. 67–74, 2008.
- J. Wang, F. Wang, H. Chen, X. Liu, and S. Dong, “Electrochemical surface plasmon resonance detection of enzymatic reaction in bilayer lipid membranes,” Talanta, vol. 75, no. 3, pp. 666–670, 2008.
- X. Kang, G. Cheng, and S. Dong, “A novel electrochemical SPR biosensor,” Electrochemistry Communications, vol. 3, no. 9, pp. 489–493, 2001.
- K. V. Gobi, H. Iwasaka, and N. Miura, “Self-assembled PEG monolayer based SPR immunosensor for label-free detection of insulin,” Biosensors and Bioelectronics, vol. 22, no. 7, pp. 1382–1389, 2007.
- S. Sriwichai, A. Baba, S. Phanichphant, K. Shinbo, K. Kato, and F. Kaneko, “Electrochemically controlled surface plasmon resonance immunosensor for the detection of human immunoglobulin G on poly(3-aminobenzoic acid) ultrathin films,” Sensors and Actuators, B, vol. 147, no. 1, pp. 322–329, 2010.
- H. Peng, L. Zhang, C. Soeller, and J. Travas-Sejdic, “Conducting polymers for electrochemical DNA sensing,” Biomaterials, vol. 30, no. 11, pp. 2132–2148, 2009.
- K. S. V. Santhanam, “Conducting polymers for biosensors: rationale based on models,” Pure and Applied Chemistry, vol. 70, no. 6, pp. 1259–1262, 1998.
- M. Yuqing, C. Jianrong, and W. Xiaohua, “Construction of a glucose biosensor by immobilizing glucose oxidase within a poly(o-phenylenediamine) covered screen-printed electrode,” Journal of Biological Sciences, vol. 6, no. 1, pp. 18–22, 2006.
- D. D. Ateh, H. A. Navsaria, and P. Vadgama, “Polypyrrole-based conducting polymers and interactions with biological tissues,” Journal of the Royal Society Interface, vol. 3, no. 11, pp. 741–752, 2006.
- 2010, http://www.immunosensors.com/.
- 2010, http://www.mdpi.com/journal/sensors/special_issues/immunosensors.
- A. Ramanavicius, A. Finkelsteinas, H. Cesiulis, and A. Ramanaviciene, “Electrochemical impedance spectroscopy of polypyrrole based electrochemical immunosensor,” Bioelectrochemistry, vol. 79, no. 1, pp. 11–16, 2010.
- J. Wang, F. Wang, Z. Xu, Y. Wang, and S. Dong, “Surface plasmon resonance and electrochemistry characterization of layer-by-layer self-assembled DNA and Zr4+ thin films, and their interaction with cytochrome c,” Talanta, vol. 74, no. 1, pp. 104–109, 2007.
- R. Janmanee, A. Baba, S. Phanichphant et al., “Detection of human IgG on Poly(pyrrole-3-carboxylic acid) thin film by electrochemical-Surface plasmon resonance spectroscopy,” Japanese Journal of Applied Physics, vol. 50, no. 1, Article ID 01BK02, 6 pages, 2011.