- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Annual Issues
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Journal of Nanotechnology
Volume 2012 (2012), Article ID 729756, 7 pages
doi:10.1155/2012/729756
Wear-Resistant Ultrahigh-Molecular-Weight Polyethylene-Based Nano- and Microcomposites for Implants
1Institute of Strength Physics and Materials Science SB RAS, Laboratory of Composite Polymeric Materials, pr. Akademicheskii, 2/4, Tomsk 634021, Russia
2National Research Tomsk Polytechnic University, Institute of Physics of High Technologies, Lenin Avenue, 30, Tomsk 634050, Russia
3Institute of Solid State Chemistry and Mechanochemistry SB RAS, Laboratory of Intercalation and Mechanochemical Reactions, Kutateladze 18, Novosibirsk 630128, Russia
4V.A. Belyi Metal-Polymer Research Institute NASB, Department of Mechanics of Adaptive Materials and Biomechanics, 32A Kirov Street, 246050 Gomel, Belarus
Received 10 April 2012; Accepted 18 May 2012
Academic Editor: Guifu Zou
Copyright © 2012 S. V. Panin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
S. V. Panin, L. A. Kornienko, N. Sonjaitham, et al., “Wear-Resistant Ultrahigh-Molecular-Weight Polyethylene-Based Nano- and Microcomposites for Implants,” Journal of Nanotechnology, vol. 2012, Article ID 729756, 7 pages, 2012. doi:10.1155/2012/729756