Abstract

Diarrheagenic and uropathogenic E. coli types are mainly characterized by the expression of distinctive bacterial virulent factors. stx1, stx2 (Shiga toxins), and cdt (cytolethal distending toxin) genes have been acquired by horizontal gene transfer. Some virulent genes such as espP (serine protease), etpD (part of secretion pathway), and katP (catalase-peroxidase), or sfpA gene (Sfp fimbriae), are on plasmids and the others like fliC (flagellin) and the fimH gene (fimbriae type-I) are located on chromosome. Genomic pathogenicity islands (PAIs) carry some virulent genes such as hly gene. To determine the existence of virulence genes in cdt clinical isolates, genes including stx1, stx2, cdt, hly, espP, katP, sfpA, etpD, fliC, and fimH were assessed by Polymerase Chain Reaction (PCR). The most prevalent isolates for etpD and katP genes were 85.7% in cdtII. katP gene was also observed 83.3% in cdtI. However, in 42.85% of cdtIII isolates, espP gene was the most detected. Moreover, hly gene was also the most prominent gene in cdtIII (71.42%). sfpA gene was observed in 66.6% of cdtV. stx1 gene was detected in 100% of cdtII, cdtIV, and cdtV types. Presence and pattern of virulence genes were considered among cdt positive isotypes and used for their clustering and profiling.

1. Introduction

Escherichia coli  (E. coli) are known as a commonly colonizing bacteria of the human intestinal tract. Foreign DNA including plasmids, pathogenicity islands (PAIs), transposons, and phages are acquired through the horizontal gene transfer by an ancient nonpathogenic E. coli strain and led to development of specific pathotypes. However, the genomic background has a pivotal role in evolutionary pathways. Pathogenic E. coli strains are classified based on repertoires of virulence factors and the most common diseases associated with them.

Shiga toxins are a family of related toxins with two major groups, Stx1 and Stx2, expressed by genes considered to be horizontally acquired by bacteriophages. Shiga toxin encoded by stx1 and stx2 genes is an A-B type toxin that inhibits protein synthesis and causes hemorrhagic colitis and hemolytic-uremic syndrome. The stx genes are located in the genome of heterogeneous lytic (stx2) or cryptic (stx1) lambdoid phages [14]. Cytolethal distending toxins (CDTs) were the firstly recognized bacterial toxins that block the eukaryotic cell cycle, suppress cell proliferation, and eventually lead to cell death. A CDT is a tripartite holotoxin in which cdtB is the active subunit and has DNAase-I-like activity [5]. Five different CDTs (I–V) have been reported for E. coli so far, and they were designated in order of publications. CDT production has been associated with pathogenic E. coli. The presence of cdt genes in different bacterial species and the analysis of the DNA in the vicinity of the cdt genes suggest that the toxin has been acquired from heterogenic species by horizontal gene transfer. However, the probable phylogenetic origin (or ancestor) has still remained elusive. Interestingly, the phage and the corresponding insertion sequence remnants were found nearby the E. coli cdt genes. These data suggest that cdt genes were acquired by horizontal transfer events at some point and evolved separately since then [5, 6].

As with stx gene, some types of cdt genes are horizontally acquired by phages in E. coli [6, 7].

It is now evident that some virulent genes are located on a large virulent plasmid (pO157) in pathogenic E. coli, among which are the extracellular serine protease gene (espP), catalase-peroxidase gene (katP), and type II secretion pathway protein D (etpD). Besides different sizes of this plasmid were reported and may not contain all these 3 genes which indicate independency of genetic exchanges through the horizontal gene transfer process. EspP can be grouped into the autotransporter proteins family and characterized by catalytically active serine residue in the active center. EspP cleaves pepsin and human coagulation factor V [811]. Catalase-peroxidase gene (katP) encodes a protein which shows bifunctional catalase and peroxidase activity [12]. This enzyme is expressed by pathogenic strains and has been thought to protect these pathogens from oxidative damage caused by reactive oxygen molecules produced by phagocytes or other host cells during the infection process [13]. Type II secretion pathway protein D encoded by etpD gene is another pathogenic factor encoded on the aforementioned plasmid [14].

A cluster of six genes, termed sfp including sfpA gene, are located on another plasmid, pSFO157, in some pathogenic E. coli strains. This genomic cluster mediates mannose-resistant hemagglutination and expression of a novel type of fimbriae, Sfp fimbriae, which is 3–5 nm in diameter, the major subunit of which is SfpA [15, 16].

Type 1 fimbriae, encoded by a chromosomally located fim gene cluster, are the most common adhesive organelles of Escherichia coli. Fimbriae-mediated adherence, which facilitates colonization and survival in host cells, plays a significant role in pathogenesis. Type 1 fimbriae consist of a major structural subunit (FimA) and several minor components, including adhesin (FimH) [17, 18]. fliC gene encoding the flagellin subunit is located on chromosome and could be considered as genomic background. Flagella facilitate bacterial movement and have a vital role in bacterial distribution in intestine and host tissues [19].

Pathogenicity islands (PAIs) are a subgroup of genomic islands that carry one or more virulent genes and are present in the genome of a pathogenic bacterium but absent from the genomes of nonpathogenic species. PAIs occupy relatively large genomic regions. The regions carrying hemolysin gene (hly) is located in PAI of E. coli chromosome [2022].

In this study, the occurrence of virulent plasmid-borne genes, pathogenicity island, and chromosomally encoded genes in CDT-producing E. coli strains was investigated.

2. Materials and Methods

2.1. Bacterial Strains

In this study, 30 CDT-producing strains were investigated. The strains were isolated from clinical diarrheal patients [25, 26] and were cultured overnight at 37°C in Luria Bertani (LB) medium.

2.2. DNA Extraction

Template DNA extraction was performed by Phenol-Chloroform assay (1 mL from cultured LB centrifuged at 14000 rpm for 3 minute), and then the pellet was dissolved in 1 mL of 5 mM Tris-HCl pH = 6.8, centrifuged at 10000 rpm for 2 minutes. The pellet was then resuspended in 350 μL of 5 mM Tris-HCl pH = 6.8 with 25 μL lysozyme enzyme (5 mg/mL) and 25 μL of 1 M Tris-HCl, pH: 8.8, and incubated for 15 minutes in room temperature. Next, 15 μL 0.5 M EDTA was added with 40 μL SDS10% and 10 μL RNase enzyme (20 mg/mL), mixed gently, and treated at 37°C for 2-3 hours. After adding 5 μL proteinase K (20 mg/mL), the samples were incubated overnight at 37°C and, afterwards, heated for 5 minutes at 55°C. Then, 400 μL phenol was added and mixed gently and 400 μL chloroform was added, mixed vigorously or by vortex, and centrifuged for 20 minutes (14000 rpm). The upper phase was collected, and 800 μL cold ethanol 96% was added and left at room temperature for 15–30 minutes and then was centrifuged at 14000 rpm for 15 minutes. The upper phase was discarded and the pellet was washed 1-2 times, dried, and dissolved in 50 μL TE (1x) and then heated at 75°C for 15 minutes.

In addition, elution was performed using TE (1x) buffer. Totally, the concentration of templates was adjusted to 100 ng/μL.

2.3. Amplification of Target Genes and PCR Conditions

Virulence-associated genes, including fliC, fimH, stx1, stx2, etpD, espP, sfpA, katP, and hly genes, were assessed by Polymerase Chain Reaction (PCR). cdt typing based on specific primers was performed. In Table 1 the nucleotide sequence of primers used for amplification of target genes is depicted.

PCR samples were prepared in a total volume of 25 μL (PCR buffer: (10x) buffer/CinnaGen Co, dNTP: 25 mM/Fermentas, Taq DNA polymerase: 5 units per μL/CinnaGen Co, MgCl2: 50 mM/CinnaGen Co., D.D.W., Template: extracted genomic DNA (100 ng/μL), Thermocycler: SENSOQUEST Labcycler).

2.4. Cloning and Sequencing

In this study, we cloned some positive samples and sequenced the PCR products. After PCR optimization and gene amplification, gene extraction from gel agarose was done with “Core one Gel extraction kit GE-100, CoreBioSystem Co. Ltd.” We also utilized pTZ57R/T vector for ligation process which was done with InsTA clone PCR Cloning Kit (Fermentas). Recombinant cells were cultured on plates containing Ampicillin (500 mg/mL).

2.5. Hierarchical Clustering

Virulence-associated genes of strains were compared based on dendogram illustration. A hierarchical clustering analysis was performed and dendrogram was constructed by IBM SPSS Statistics software (Version 20). All virulent genes regarded as variables and statistics setting was set on Agglomeration schedule. Cluster method was between-groups linkage by measuring squared Euclidean distance.

3. Results

3.1. Virulent Genes Detection

Existence of virulence genes, including espP, etpD, katP, sfpA, hly, fliC, fimH, stx1, stx2, and cdt genes, was assessed by PCR (Table 2).

All strains were cdt positive and regarding cdt types 6 strains were cdt-I (20%), 7 strains (23.3%) were cdt-II, cdt-III, and cdt-IV, and 3 strains were recognized as cdt-V (10%).

In the present study, stx1 gene was present in 86.7% of clinical isolates. However, the stx2 gene was detected in 13.3% of strains. stx1 gene was also detected in 83.3% of cdt-type-I producing strains, while it was detected in all the cdt-type II, IV, V strains and in 57.1% of cdt-III isolates (Table 3). stx2 gene was present at 33.3% of cdt-type strains, 14.3% in cdt-type III, IV strains, while in CDT-II and CDT- producing isolates it was not observed.

hly gene was not detected in any of CDT-I-producing strains. However, it was detected in 14.3% of cdt-II strains, 71.4% of cdt-III strains, 57.1% of cdt-IV strains, and 66.7% of CDT-V-producing isolates (Table 3). In this clinical isolates, 53.3% etpD, 63.3% katP,and 23.3% espP genes were detected. In the present study, etpD gene was observed in 33.3% of cdt-type I, 85.7% of cdt-type II, 28.6% of cdt-type III, 57.1% of cdt-type IV, and 66.7% of cdt-type V strains. espP gene was present in 16.7% of cdt-type I, 42.9% of CDT-III-producing, 28.6% of cdt-type IV, 33.3% of cdt-type V strains, while, in CDT-II-producing isolates, the gene was not detected. In addition, katP gene was detected in 83.3% of cdt-type I, in 85.7% of cdt-type II, in 57.1% of CDT-III- and CDT-IV-producing strains, while, this gene was not observed in CDT-V-producing strains (Table 3).

Occurrence of virulent genes, espP, etpD, katP, and sfpA, was classified as an A–M pattern which was based on the existence of plasmid encoding genes (Table 4).

The most prominent F profile with 20% frequency was repeated 6 times (etpD/katP). The absence of plasmid genes was shown in 10% of strains. Frequency of all the plasmid born associated genes with L profile was only 3.33% (espP/etpD/katP/sfpA).

The higher prevalence of profile F (etpD/katP) is considerable (20%) and then profile C (katP) is more prevalent (16.68%). The frequency of profiles B (etpD), D (espP/katP), G (etpD/sfpA), and M (absence of plasmid-borne genes) was 10%. The frequency of other remaining profiles was 3.33% exceptionally and profile I (etpD/katP/sfpA) is 6.67%.

In cdt-I group, 50% I profile (etpD/katP/sfpA) was shown, and in 40% of strains, C profile (katP) was demonstrated. In cdt-II group, 50% strains also showed I profile (etpD/katP/sfpA) and in 66.67% of strains F profile (etpD/katP) (the most prominent profile) was detected. The prominent profiles in cdt-III group were 100% E profile (espP/sfpA) and 66.67% D profile (espP/katP). H, K, and L profiles are the most frequent profiles (100%) in cdt-IV group. In cdt-V group, 100% of strains have A profile (espP) and 66.67% showed G profile (etpD/sfpA). In each cdt group specific plasmid born profile was shown in Table 5.

The most prominent gene in each group was determined. katP plasmid gene was presented 83.3% in cdt-I and 85.7% in cdt-II groups. The etpD gene presentation was 85.7% in cdt-II group and 66.66% in cdt-IV group; espP presentation was 42.85% and 33.33% in cdt-III and cdt-V group, respectively. The sfpA presentation in cdt-IV and cd-tV group was 42.85% and 66.66%, respectively.

3.2. Dendogram Clustering of Strains

In Figure 1, hierarchical clustering analysis based on average linkage and rescaled distance cluster combine was done. The pattern of virulence gene association was compared and the linkage of these strains was illustrated. In this dendogram, association of cdt-I, cdt-II (branch 4) and genetic linkage of cdt-IV, cdt-V (branch 3) groups was shown in branch 1. The genotype association of cdt-III was also shown in a completely separated branch (branch 2).

4. Discussion

In the current study, we analyzed different E. coli strains isolated from clinical diarrheal patients in order to obtain evidence of existence between virulence genotype and different cdt types. It has been shown that CDT production has been associated with pathogenic E. coli. Both the low prevalence of cdt genes and their association with other virulent genes suggest that the cdt genes are acquired independently in a number of E. coli lineages, possibly as a result of horizontal gene transfer [7]. Five different CDTs have been reported for E. coli, so far [5]. It has also been shown that cdt-I and cdt-IV genes appeared to belong to the same phylogenetic lineage, whereas the cdt-II, cdt-III, and cdt-V genes are clustered together in another lineage. This clustering profile was based on genomic extend diversity. In our study, regarding the assessed virulent genes two branches were first separated into branch 1 (including cdt-I, cdt-II and cdt-IV, cdt-V genes) and branch 2, cdt-III genes. These data suggest that cdt genes were acquired by horizontal transfer events at some point and evolved separately since then [5]. Our study shows complete separation of cdt-III from other cdt types that agree with the finding that this group originated from animals and the other groups are more belonging to human. Furthermore, cdt-I, cdt-II (branch 4) and cdt-IV, cdt-V (branch 3) groups are more similar regarding virulence genes and originated from same progeny.

It is now evident that hly gene is located on a PAI and encodes alpha-hemolysin.

The production of hemolysin in cdt-III-, cdt-IV-producing human and animal pathogenic E. coli strains was observed frequently [5]. Thus, not surprisingly, hly was detected in 40% of our clinical isolates. In concurrence with other studies, the prevalence of hly gene in cdt-type III, IV, V was more than other isolates. These results demonstrate that, possibly, there could be a relationship between the existence of hly gene and the type of cdt gene in clinical E. coli isolates.

fliC and fim are the two chromosomally located genes analyzed in our study. fliC gene was detected in 96.7% of our isolates. fliC gene encodes the flagellin subunit and could be considered as genomic background of E. coli. Thus it could be expected to detect fliC in the most of our isolates. Similar to our findings, all the isolates have fliC gene in an experiment performed in Finland in 2006 [23]. Type 1 fimbriae are also encoded by the chromosomally located fim gene cluster. The presence of fim DNA sequences is common among E. coli strains. In fact, the majority of clinical isolates, both virulent and avirulent, could be induced to express type 1 fimbriae.

Among pathogenic E. coli, the existence of a large virulent plasmid (pO157) has been observed. The etpD, katP, and espP genes are located on this plasmid. pO157 plasmid is mainly associated with EHEC and ETEC strains. In our study, 53.3% of clinical isolates harbor etpD, 63.3% katP and 23.3% espP genes. There is a relation between the occurrence of stx genes and these virulent plasmid-associated genes [24]. Moreover, PCR analysis revealed a close relationship between the occurrence of plasmid-borne katP gene and stx gene in pathogenic E. coli [12]. Most of katP+ strains belong to shiga toxin-producing E. coli [24]. Our results were similar to the findings by Beutin et al., 2005 [24, 27]. Based on our findings, it could be deduced that katP gene is mostly present in CDT-I- and CDT-II-producing strains.

ESpP, which possesses human coagulation factor V and pepsin A proteolytic activity, is the significant marker of virulence in shiga toxin-producing strains [28]. High frequency of espP in CDT-III-producing isolates is considerable.

Alpha-hemolysin is frequently associated with human uropathogenic E. coli (UPEC); furthermore related encoding PAI is also so instable and the operon could be located on either a plasmid or the chromosome [22, 29]. Besides urinary tract infection (UTI) is caused predominantly by type 1-fimbriated UPEC and initial binding is mediated by the FimH adhesin of the mentioned fimbriae [30]. In our study in 100% of hly+ strains, fimH gene was detected. In addition, all hly+ strains possess one or more of plasmid pO157 genes including etpD, katP, and espP. These genes plus stx gene are one of the EHEC and STEC characteristics although espP gene is common in EPEC and EHEC [14, 31]. Simultaneous presence of these genes indicates that our isolates obtain hly operon and relevant PAI through the horizontal gene transfer. In addition, in evolutionary pathway, isolates by achieving the cdt genes improve their pathogenicity.

Our findings demonstrate that considering virulence genes CDT-producing strains belong to the heterogeneous group. The branching-type nature of dendrogram allows us to cluster the strains at various levels. Moreover, it gives an idea of how great the distance is between the cases that are clustered in a particular step, using a 0 to 25 scale along the top of the chart (Figure 1). Strains which are clustered as a particular group or close together in dendrogram are likely to have similar characteristics while possess their own unique genotype and genomic content. In the same cluster, one can also observe a relatively unique pattern of virulent genes which is shown in Figure 1. For instance, each distinct cdt-type group, by possessing a particular cdt gene as genomic backbone, has an approximately similar pattern based on other virulent genes. For example, profile F (etpD/katP) is more prevalent in cdt-type II group or hly gene is prevalent in cdt-type III isolates.

In addition, this phenomenon is also observed in each group belonging to a particular plasmid-profile, so that cdt-V gene is the most prevalent in profile G (etpD/sfpA). This evidence further confirms that horizontal gene transfer could occur among pathogenic strains.

Association of cdt-I, cdt-II and cdt-IV, cdt-V genotype groups is depicted in the dendogram. Accordingly, cdt-III genotype association has been shown in a separated branch. On the other hand, from 3 strains of cdt-V, two strains were associated with cdt-IV while one strain was associated with cdt-III.

These findings may indicate that CDT-producing strains may have originated from a common ancestor but during their evolution by horizontal gene transfer, and they departed from each other.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.