About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [33 citations: 33 articles]

Articles published in Journal of Petroleum Engineering have been cited 33 times. The following is a list of the 33 articles that have cited the articles published in Journal of Petroleum Engineering.

  • Balwinder Nimana, Christina Canter, and Amit Kumar, “Energy consumption and greenhouse gas emissions in the recovery and extraction of crude bitumen from Canada’s oil sands,” Applied Energy, vol. 143, pp. 189–199, 2015. View at Publisher · View at Google Scholar
  • Achinta Bera, and Tayfun Babadagli, “Status of electromagnetic heating for enhanced heavy oil/bitumen recovery and future prospects: A review,” Applied Energy, vol. 151, pp. 206–226, 2015. View at Publisher · View at Google Scholar
  • Hyemin Park, Jinju Han, and Wonmo Sung, “Effect of polymer concentration on the polymer adsorption-induced permeability reduction in low permeability reservoirs,” Energy, vol. 84, pp. 666–671, 2015. View at Publisher · View at Google Scholar
  • Robert Shiver, Kim Nelsen, Eifei Li, John Lee, and Grad Dwithes, “Unconventional Shale Reservoir’s Property Estimation through Modeling, Case Studies of Australian Shale,” Energy and Power Engineering, vol. 07, no. 03, pp. 71–80, 2015. View at Publisher · View at Google Scholar
  • Kun-Yi Andrew Lin, Hongta Yang, Camille Petit, and Shen-Yi Chen, “Removal of oil droplets from water using carbonized rice husk: enhancement by surface modification using polyethylenimine,” Environmental Science And Pollution Research, vol. 22, no. 11, pp. 8316–8328, 2015. View at Publisher · View at Google Scholar
  • Nisar Ali, Baoliang Zhang, Hepeng Zhang, Wei Li, Wajed Zaman, Lei Tian, and Qiuyu Zhang, “Novel Janus magnetic micro particle synthesis and its applications as a demulsifier for breaking heavy crude oil and water emulsion,” Fuel, vol. 141, pp. 258–267, 2015. View at Publisher · View at Google Scholar
  • E. Gravanis, E. Sarris, and P. Papanastasiou, “Hydro-mechanical erosion models for sand production,” International Journal for Numerical and Analytical Methods in Geomechanics, 2015. View at Publisher · View at Google Scholar
  • Gary Feast, Kim Wu, John Walton, Zufang Cheng, and Bao Chen, “Modeling and Simulation of Natural Gas Production from Unconventional Shale Reservoirs,” International Journal of Clean Coal and Energy, vol. 04, no. 02, pp. 23–32, 2015. View at Publisher · View at Google Scholar
  • Sharli Zarkar, Alexander Couzis, and Sanjoy Banerjee, “Effect of Premixed Asphaltenes and Demulsifier on Oil-Water Interfacial Properties,” Journal of Dispersion Science and Technology, vol. 36, no. 10, pp. 1465–1472, 2015. View at Publisher · View at Google Scholar
  • Umut Aybar, Wei Yu, Mohammad O. Eshkalak, Kamy Sepehrnoori, and Tad Patzek, “Evaluation of production losses from unconventional shale reservoirs,” Journal of Natural Gas Science and Engineering, vol. 23, pp. 509–516, 2015. View at Publisher · View at Google Scholar
  • Siamak Akhshik, Mehdi Behzad, and Majid Rajabi, “CFD-DEM Approach to Investigate the Effect of Drill Pipe Rotation on Cuttings Transport Behavior,” Journal of Petroleum Science and Engineering, 2015. View at Publisher · View at Google Scholar
  • Gholamhossein Sodeifian, Reyhaneh Daroughegi, and Jamal Aalaie, “Study of adsorptive behavior of sulfonated polyacrylamide onto carbonate rock particles to enhance oil recovery,” Korean Journal of Chemical Engineering, 2015. View at Publisher · View at Google Scholar
  • Liang Wang, Armando Torres, Li Xiang, Xu Fei, Akhona Naido, and Wensi Wu, “A Technical Review on Shale Gas Production and Unconventional Reservoirs Modeling,” Natural Resources, vol. 06, no. 03, pp. 141–151, 2015. View at Publisher · View at Google Scholar
  • S. Murugan, and Sai Gu, “Research and development activities in pyrolysis – Contributions from Indian scientific community – A review,” Renewable and Sustainable Energy Reviews, vol. 46, pp. 282–295, 2015. View at Publisher · View at Google Scholar
  • Thiago Feital, and José Carlos Pinto, “Use of variance spectra for in-line validation of process measurements in continuous processes,” The Canadian Journal of Chemical Engineering, 2015. View at Publisher · View at Google Scholar
  • Abhishek Dash, Sachin Kumar, and R. K. Singh, “Thermolysis of Medical Waste (Waste Syringe) to Liquid Fuel Using Semi Batch Reactor,” Waste And Biomass Valorization, vol. 6, no. 4, pp. 507–514, 2015. View at Publisher · View at Google Scholar
  • Kun-Yi Andrew Lin, and Shen-Yi Chen, “Enhanced Removal of Oil Droplets from Oil-in-Water Emulsions Using Polyethylenimine-Modified Rice Husk,” Waste And Biomass Valorization, vol. 6, no. 4, pp. 495–505, 2015. View at Publisher · View at Google Scholar
  • Upendra Singh Yadav, and Vikas Mahto, “In Situ Gelation Study of Organically Crosslinked Polymer Gel System for Profile Modification Jobs,” Arabian Journal for Science and Engineering, 2014. View at Publisher · View at Google Scholar
  • Yonghong Sun, Xiaoshu Lü, and Wei Guo, “A review on simulation models for exploration and exploitation of natural gas hydrate,” Arabian Journal of Geosciences, 2014. View at Publisher · View at Google Scholar
  • Kun-Yi Andrew Lin, Hongta Yang, Camille Petit, and Fu-Kong Hsu, “Removing Oil Droplets from Water using a Copper-based Metal Organic Frameworks,” Chemical Engineering Journal, 2014. View at Publisher · View at Google Scholar
  • Akbota O. Adilbekova, Kainzhamal I. Omarova, Ainamkoz Karakulova, and Kuanyshbek B. Musabekov, “Nonionic surfactants based on polyoxyalkylated copolymers used as demulsifying agents,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014. View at Publisher · View at Google Scholar
  • Marcel Joly, Roger Rocha, Luiz Carlos F. Sousa, Marcia T. Takahashi, Pierre N. Mendonça, Leonardo A.M. Moraes, and André D. Quelhas, “The strategic importance of teaching Operations Research for achieving high performance in the petroleum refining business,” Education for Chemical Engineers, 2014. View at Publisher · View at Google Scholar
  • Mi Liu, Jian K. Zhuo, Si J. Xiong, and Qiang Yao, “Catalytic Degradation of High-Density Polyethylene over a Clay Catalyst Compared with Other Catalysts,” Energy & Fuels, vol. 28, no. 9, pp. 6038–6045, 2014. View at Publisher · View at Google Scholar
  • Natalia Climent, Marcos Arroyo, Catherine O’Sullivan, and Antonio Gens, “Sand production simulation coupling DEM with CFD,” European Journal of Environmental and Civil Engineering, pp. 1–26, 2014. View at Publisher · View at Google Scholar
  • Ismail Md. Saaid, Siti Qurratu Aini Mahat, Bhajan Lal, Mohamed Ibrahim Abd. Mutalib, and Khalik M. Sabil, “Experimental Investigation on the Effectiveness of 1-Butyl-3-methylimidazolium Perchlorate Ionic Liquid as a Reducing Agent for Heavy Oil Upgrading,” Industrial & Engineering Chemistry Research, pp. 140505161736005, 2014. View at Publisher · View at Google Scholar
  • Sachin Kumar, and R.K. Singh, “Optimization of process parameters by response surface methodology (RSM) for catalytic pyrolysis of waste high-density polyethylene to liquid fuel,” Journal of Environmental Chemical Engineering, vol. 2, no. 1, pp. 115–122, 2014. View at Publisher · View at Google Scholar
  • P.G. Ranjith, M.S.A. Perera, W.K.G. Perera, S.K. Choi, and E. Yasar, “Sand production during the extrusion of Hydrocarbons from geological Formations: A review,” Journal of Petroleum Science and Engineering, 2014. View at Publisher · View at Google Scholar
  • Sanket A Deshmukh, Ganesh Kamath, Dr. Vilas G. Pol, and Subramanian K.R.S. Sankaranarayanan, “ Kinetic Pathways to Control Hydrogen Evolution and Nanocarbon Allotrope Formation via Thermal Decomposition of Polyethylene ,” The Journal of Physical Chemistry C, pp. 140211135519005, 2014. View at Publisher · View at Google Scholar
  • Mohammad Rezapour, Morteza Khavanin Zadeh, and Mohammad Mehdi Sepehri, “Implementation of Predictive Data Mining Techniques for Identifying Risk Factors of Early AVF Failure in Hemodialysis Patients,” Computational and Mathematical Methods in Medicine, vol. 2013, pp. 1–8, 2013. View at Publisher · View at Google Scholar
  • Chuanliang Yan, Jingen Deng, Xiangdong Lai, Lianbo Hu, and Zijian Chen, “Critical Drawdown Pressure of Depleted Reservoir,” Indian Geotechnical Journal, 2013. View at Publisher · View at Google Scholar
  • Upendra Yadav, and Vikas Mahto, “Rheological study of partially hydrolyzed polyacrylamide-hexamine-pyrocatechol gel system,” International Journal of Industrial Chemistry, vol. 4, no. 1, pp. 8, 2013. View at Publisher · View at Google Scholar
  • Sami Sajjadifar, Saaid Karimian, Hadi Noorizadeh, and Hojat Veisi, “Regioselective Thiocyanation of Aromatic and Heteroaromatic Compounds Using [2-(Sulfooxy)ethyl]sulfamic Acid as an Efficient, Recyclable Organocatalyst and Novel Difunctional Brønsted Acid,” Journal of Catalysts, vol. 2013, pp. 1–7, 2013. View at Publisher · View at Google Scholar
  • Sami Sajjadifar, Hossein Hosseinzadeh, Saied Ahmadaghaee, Eshagh Rezaee Nezhad, and Saaid Karimian, “1-Methyl-3-(2-(sulfooxy)ethyl)-1H-imidazol-3-ium thiocyanate as a novel, green and efficient Brønsted acidic ionic liquid-promoted regioselective thiocyanation of aromatic and heteroaromatic compounds at room temperature,” Phosphorus, Sulfur, and Silicon and the Related Elements, pp. 130820123114004, 2013. View at Publisher · View at Google Scholar