Editorial Board

• H. Abdoli, Tarbiat Modares University, Iran
• Mike J. Adams, University of Birmingham, United Kingdom
• Tetsuo Aida, University of Toyama, Japan
• Serdar Aydin, Dokuz Eylul University, Turkey
• Jan Baeyens, The University of Warwick, United Kingdom
• Thierry Barriere, Université de Franche-Comté, France
• Franco Berruti, University of Western Ontario, Canada
• Alexandru Sorin Biris, University of Arkansas at Little Rock, USA
• Efraín Carreño-Morelli, University of Applied Sciences Western Switzerland, Switzerland
• Brigitte Caussat, Institut National Polytechnique de Toulouse, France
• Suk Fun Chin, University Malaysia Sarawak, Malaysia
• Chuen-Shii Chou, National Pingtung University of Science and Technology, Taiwan
• Clive E. Davies, Massey University, New Zealand
• Juray De Wilde, Université catholique de Louvain, Belgium
• Alberto Di Renzo, Università della Calabria, Italy
• Yoshiyuki Endo, Sumitomo Chemical, Process and Production Technology Center, Japan
• Cavus Falamaki, Amirkabir University of Technology, Iran
• Isaac K. Gamwo, U.S. Departement of Energy, National Energy Technology Laboratory, USA
• Antonieta Garcia Murillo, Instituto Politécnico Nacional, Mexico
• Tayssir HAMIEH, Lebanese university, Lebanon
• Donald F. Heaney, Pennsylvania State University, USA
• Michael P. Hofmann, University of Birmingham, Germany
• Inigo Iturriza, Centro de Estudios e Investigaciones Técnicas de Gipuzkoa, Spain
• Laurence Le Coq, Ecole des Mines de Nantes, France
• Chengfeng Li, Shandong University of Technology, China
• Chiou-Liang Lin, National University of Kaohsiung, Taiwan
• Henk G. Merkus, Delft University of Technology, The Netherlands
• Hiroshi Mio, Nippon Steel Corporation, Japan
• Vadim Mizonov, Ivanovo State Power Engineering University, Russia
• Hervé Muhr, Ecole Nationale Superieure des Industries Chimiques, France
• Hermann Nirschl, Karlsruhe Institute of Technology, Germany
• O.M. Ntwaeaborwa, The University of the Free State, South Africa
• Enrique Ortega-Rivas, Autonomous University of Chihuahua, Mexico
• Andrzej W Pacek, University of Birmingham, United Kingdom
• Sreekanth Pannala, Oak Ridge National Laboratory, USA
• Virendra Puri, Pennsylvania State University, USA
• Paul Roach, Keele University, United Kingdom
• Luis Guerra Rosa, Technical University of Lisbon, Portugal
• Fumio Saito, Tohoku University, Japan
• Khashayar Saleh, Université de Technologie de Compiègne, France
• Joel Scher, Université de Lorraine, France
• Masanori Shiomi, Kogakuin University, Japan
• Hooman Shokrollahi, Shiraz University of Technology, Iran
• Tomasz Sosnowski, Warsaw University of Technology, Poland
• Pavan Suri, Heraeus Materials Technology North America LLC, USA
• Izumi Taniguchi, Tokyo Institute of Technology, Japan
• Ulrich Teipel, Ohm University Nuremberg, Germany
• Dominique Thomas, Université de Lorraine, France
• Jürgen Tomas, University of Magdeburg, Germany
• Wei Hsing Tuan, National Taiwan University, Taiwan
• Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
• Chuan-Yu Wu, Department of Chemical and Process Engineering Faculty of Engineering and Physical Sciences University of Surrey Guildford, GU2 7XH United Kingdom, United Kingdom
• Jinxiang Xi, Central Michigan University, USA
• Runyu Yang, The University of New South Wales, Australia
• Sultan Zuraimi, National Research Council Canada, Canada