About this Journal Submit a Manuscript Table of Contents
Journal of Robotics
Volume 2011 (2011), Article ID 168481, 11 pages
http://dx.doi.org/10.1155/2011/168481
Research Article

A Robotic System to Scan and Reproduce Object

Department of Mechanical Engineering for Energetics, University of Naples Federico II, Via Claudio 21, 80125 Naples, Italy

Received 22 June 2011; Revised 7 December 2011; Accepted 13 December 2011

Academic Editor: Gordon R. Pennock

Copyright © 2011 Cesare Rossi and Sergio Savino. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Hebert, “Active and passive range sensing for robotics,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '00), pp. 102–110, San Francisco, Calif, USA, April 2000.
  2. J. L. Martinez, A. Pozo-Ruz, S. Pedraza, and R. Fernandez, “Object following and obstacle avoidance using a laser scanner in the outdoor mobile robot Auriga-α,” in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 204–209, October 1998.
  3. S. I. Roumeliotis and G. A. Bekey, “SEGMENTS: A layered, dual-Kalman filter algorithm for indoor feature extraction,” in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 454–461, Takamatsu, Japan, November 2000.
  4. Y. D. Kwon and J. S. Lee, “Stochastic map building method for mobile robot using 2-D laser range finder,” Autonomous Robots, vol. 7, no. 2, pp. 187–200, 1999. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Scott, L. E. Parker, and C. Touzet, “Quantitative and qualitative comparison of three laser-range mapping algorithms using two types of laser scanner data,” in Proceedings of the IEEE Interantional Conference on Systems, Man and Cybernetics, pp. 1422–1427, October 2000.
  6. J. Guivant, E. Nebot, and S. Baiker, “High accuracy navigation using laser range sensors in outdoor applications,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '00), pp. 3817–3822, April 2000.
  7. L. A. Albuquerque and J. M. S. T. Motta, “Implementation of 3D shape reconstruction from range images for object digital modeling,” ABCM Symposium Series in Mechatronics, vol. 2, pp. 81–88, 2006.
  8. L. Zhang and B. K. Ghosh, “Line segment based map building and localization using 2D laser rangefinder,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '00), pp. 2538–2543, April 2000.
  9. P. Biber, H. Andreasson, T. Duckett, and A. Schilling, “3D modeling of indoor environments by a mobile robot with a laser scanner and panoramic camera,” in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, Sendai, Japan, October 2004.
  10. T. Borangiu, A. Dogar, and A. Dumitrache, “Modeling and simulation of short range 3D triangulation-based laser scanning system,” International Journal Computers,Communications & Control, vol. 3, supplement, pp. 190–195, 2008.
  11. S. Larsson and J. A. P. Kjellander, “Motion control and data capturing for laser scanning with an industrial robot,” Robotics and Autonomous Systems, vol. 54, no. 6, pp. 453–460, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. R. A. Jarvis and Y. L. Chiu, “Robotic replication of 3D solids,” in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, (IROS '96), pp. 89–95, November 1996.
  13. R. Brancati, C. Rossi, and S. Scocca, “An experimental planar manipulator controlled in the joint space,” in Proceedings of the 4th IEEE International Conference on Intelligent Engineering Systems (INES '00), pp. 125–128, Portoroz, Slovenia, September 2000.
  14. S. Pagano, C. Rossi, and F. Timpone, “A low cost 5 axes revolute industrial robot design,” in Proceedings of the Workshop On Robotics in Alpe-Adria-Danube (RAAD '02), pp. 117–122, Balatonfüred, Hungary, June 2002.
  15. R. Brancati, C. Rossi, S. Savino, and G. Vollono, “A robot prototype for advanced didatic,” in Proceedings of the 13th International Workshop On Robotics in Alpe-Adria-Danube (RAAD '04), pp. 293–298, Brno, Czech Republic, June 2004.
  16. R. Brancati, C. Rossi, and S. Savino, “A method for trajectory planning in the joint space,” in Proceedings of the 14th International Workshop on Robotics in Alpe-Adria-Danube Region, pp. 81–85, Bucharest, Romania, May 2005.
  17. V. Niola, C. Rossi, S. Savino, and S. Strano, “A method for the calibration of a 3-D laser scanner,” in Proceedings of the 19th International Conference on Flexible Automation and Intelligent Manufacturing, 2009.
  18. V. Niola, C. Rossi, S. Savino, and S. Strano, “A new real time shape acquisition system with a laser scanner: first test results,” in Proceedings of the 19th International Conference on Flexible Automation and Intelligent Manufacturing, 2009.
  19. V. Niola, C. Rossi, S. Savino, and S. Strano, “Robot trajectory planning by points and tangents,” in Proceedings of the 10th WSEAS International Conference On Robotics, Control And Manufacturing Technology, Hangzhou, China, April 2010.
  20. C. Rossi, S. Savino, and S. Strano, “3D object reconstruction using a robot arm,” in Proceedings of the 2nd European Conference on Mechanism Science, Cassino, Italy, 2008.
  21. C. Rossi, Lectures notes in Mechanics of Robot, Edizioni Scientifiche ed Artistiche, Naples, Italy, 2008, ISBN 978-88-95430-118-8, A.Y. 2008-2009.