Research Article

Sensitivity Improvement of an Impedimetric Immunosensor Using Functionalized Iron Oxide Nanoparticles

Figure 10

Nyquist diagram (−Im( ) versus Re( )) for the non-Faradic impedance measurements (at −400 mV versus SCE, in PBS solution 10 mM pH 7.4) corresponding to the various layers grafted onto the gold electrode (system based on iron oxide nanoparticles ): AUT, AUT-GA- IrNP., and AUT-GA-IrNP-Biot.ScAb. Spectra were obtained between 0.05 Hz and 100 kHz. Amplitude of ac voltage: 10 mV.
746548.fig.0010