About this Journal Submit a Manuscript Table of Contents
Mathematical Problems in Engineering
Volume 2012 (2012), Article ID 398130, 3 pages
http://dx.doi.org/10.1155/2012/398130
Editorial

Drying Modeling and Simulation

1School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
2Faculty of Process and Environmental Engineering, Technical University of Lodz, 90-924 Lodz, Poland
3Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, No. 16 Suojin 5th Village, Nanjin 210042, China
4Department of Environment Engineering, Kagoshima University, Korimoto 1-21-24, Kagoshima 890-8580, Japan
5Institute of Drying and Dewatering, College of Mechanical Engineering, Tianjin University of Science and Technology, 1038 Daguan Road, Hexi District, Tianjin 300222, China

Received 19 June 2012; Accepted 19 June 2012

Copyright © 2012 Zhijun Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

This article has no abstract.