- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Annual Issues
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Mathematical Problems in Engineering
Volume 2013 (2013), Article ID 852875, 13 pages
http://dx.doi.org/10.1155/2013/852875
Factors Influencing Quasistatic Modeling of Deformation and Failure in Rock-Like Solids by the Smoothed Particle Hydrodynamics Method
1State Key Laboratory of Subtropical Building Science, School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China
2State Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing 100084, China
Received 26 November 2012; Accepted 25 December 2012
Academic Editor: Fei Kang
Copyright © 2013 X. W. Tang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
X. W. Tang, Y. D. Zhou, and Y. L. Liu, “Factors Influencing Quasistatic Modeling of Deformation and Failure in Rock-Like Solids by the Smoothed Particle Hydrodynamics Method,” Mathematical Problems in Engineering, vol. 2013, Article ID 852875, 13 pages, 2013. doi:10.1155/2013/852875