Research Article
A New Calculation Method of Dynamic Kill Fluid Density Variation during Deep Water Drilling
Table 3
Parameters of the well of case study.
| Water depth (m) | 549 | Known pressure of shallow gas (Mpa) | 13.3 | Surface temperature of sea water (°C) | 21 |
| Well depth (m) | 1036 | Length of DP (m) | 946 | Length of D (m) | 60 | Length of conductor pipe (m) | 104 | OD of DP (m) | 0.14 | OD of DC (m) | 0.22 | Conductor pipe OD (m) | 0.76 | ID of DP (m) | 0.12 | ID of DC (m) | 0.09 | Conductor pipe ID (m) | 0.71 | Hole size (m) | 0.31 | PV (pa·s) | 0.001 | Length of riser (m) | 570 | Normal drilling fluid density (kg/m3) | 1018 | | |
|
|