Mathematical Problems in Engineering

The present research aims to measure the segmental bioelectrical impedance (BI) of the human body at multifrequency, using a server user interface-based prototype, which provides subjects with measured data online anywhere accessed by their unique identifications. The present research measures the BI of the human leg and arm at a multifrequency range of 50–400 kHz with a developed and standard device. Recorded data can be transferred to the subject using Wi-Fi technology with their unique identifications and password. The system uses Wi-Fi interfacing for real-time data measurement and online data storage. The prototype can be used commercially. The compact size of the prototype becomes the demand of the common population. The pocket carry size makes it easy to carry anywhere for regular monitoring of the human body to prevent critical disease. The resultant data show that the mean and standard deviation of the left and right leg are 282.2 ± 14.29 and 274.80 ± 13.91 Ω, respectively. Similarly, in the case of the left arm and right arm, the mean and standard deviation are 325.41 ± 16.54 and 320.73 ± 16.07 Ω, respectively. The relative error between developed and standard devices is 3.53%. Results show that the left leg and arm impedance is always greater. However, the right leg and arm muscles are stronger than the left one, with less impedance at all frequencies.

In this paper, we propose and analyze the dynamical behaviors of two opinion formation models, one with leadership and the other without leadership. The two proposed models are formulated by fractional differential equations (FDEs) with the frame of the new generalized Hattaf fractional (GHF) derivative. The stability in the sense of Mittag–Leffler is rigorously established for both models. The convergence of agents’ opinions to the consensus opinion is fully investigated. Numerical simulations are given to illustrate the analytical results.

The accidents caused by the domino effect in industries are highly harmful. This study aims to analyze the occurrence probability of the domino effect with respect to possible explosion and fire scenarios in chemical tanks. Using the results obtained by previous studies, reviewing past accidents, and according to the equipment damage models, threshold values were used for extraction process equipment and inherent safety distances as a criterion to prevent domino accidents. According to primary scenarios and experimental equations, the escalation vector was determined for different tanks. According to the assumption that fire radius is equivalent to inherent safety distance, the fireball radius for tank 1 was calculated 535.7 m. According to the results, the DCP index of tank 3 can be considered the most critical unit. This research studies the probability of the domino effect and means to prevent them according to criteria and hazard index parameters.

The hydraulic circuit in hydraulic mechanisms may be the cause of several vibration anomalies. Flexible pipes, in particular, commonly used in test rigs, may be the source of vibration issues due to their relatively low natural frequencies altering the pump noise, vibration, and harshness (NVH) performance. The purpose of this study is to detail a methodology based on lumped parameter modeling and experiments to analyze the circuit NVH behavior. An experimental study is carried out on two pump designs to determine the outlet pressure fluctuation of various test rig configurations. Numerical simulations are also performed to simulate the actual behavior of the hydraulic system considering these different test configurations. The tests are carried out at a chosen frequency range with a hydraulic circuit configuration representing realistic layouts. In these situations, the hydraulic circuit layout can be the source of NVH anomalies. Realistic design solutions are proposed to modify the test rig NVH behavior in order to achieve a flat response throughout the desired working range.

This paper offers a system for an electric vehicle. It consists of digitally controlling an induction motor without using a speed sensor. The machine is powered by a five-level cascading H-bridge inverter. The SVM control principle is used to manage the status of the five-level inverter; this removes harmonics. The H-bridge inverter converter is powered by photovoltaic sources via a serial converter, using the maximum power point tracker control principle. This structure can also reduce shading losses. In the absence of a mechanical sensor, a dynamic model of the asynchronous machine is utilized with the state variables defined in the stator reference frame. The state vector consists of the components of the rotor flux and stator current. The article provides a comparison of two methods widely used on an induction motor drive. The adaptive model-reference system method and Luenberger observer are evaluated using an active control strategy to reject disturbances to minimize the impact of disturbances. The operating principles of each method are described, and the mathematical models of training systems are developed. Both methods provide a promise for high-speed estimate applications in simulation environments. The simulation results obtained show the correct operation of both observers. Perfect decoupling between the velocity and flow control loops is observed, taking into account any disturbances that may affect the system.

The fluctuation of microgrid power flow leads to serious voltage problems at the point of common coupling (PCC). The quantitative representation of the disturbance parameters of the voltage waveform at the PCC is necessary for evaluating and controlling the impact of distributed generation in the microgrid on the power system. An improved atomic decomposition (IAD) method is proposed to represent the disturbance parameters quantitatively and efficiently. Based on the disturbance characteristics of the PCC voltage, a coherent atom dictionary composed of four subdictionaries is constructed to improve the decomposition efficiency. To further improve the computational efficiency, an improved matching pursuits algorithm is proposed by alternating the search way to extract the disturbance components in the atomic decomposition. Meanwhile, simulation results show that the proposed IAD method has better antinoise and disturbance parameters quantization ability than wavelet transform.