Modelling and Simulation in Engineering
Volume 2008 (2008), Article ID 628120, 11 pages
doi:10.1155/2008/628120
Research Article

Experimental and Numerical Modeling of Screws Used for Rigid Internal Fixation of Mandibular Fractures

Naresh Chaudhary,1 Scott T. Lovald,2 Jon Wagner,3 Tariq Khraishi,2 and Bret Baack3

1Manufacturing Engineering Program, University of New Mexico, Albuquerque, NM 87131, USA
2Mechanical Engineering Department, University of New Mexico, Albuquerque, NM 87131, USA
3Department of Surgery, University of New Mexico, Albuquerque, NM 87131, USA

Received 1 September 2007; Revised 2 January 2008; Accepted 6 February 2008

Academic Editor: Ewa Pietka

Copyright © 2008 Naresh Chaudhary et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Naresh Chaudhary, Scott T. Lovald, Jon Wagner, Tariq Khraishi, and Bret Baack, “Experimental and Numerical Modeling of Screws Used for Rigid Internal Fixation of Mandibular Fractures,” Modelling and Simulation in Engineering, vol. 2008, Article ID 628120, 11 pages, 2008. doi:10.1155/2008/628120