CFD-Guided Development of Test Rigs for Studying Erosion and Large-Particle Damage of Thermal Barrier Coatings

<table>Comparison of particle velocity for particles with three different diameters obtained from model predictions with that obtained from an analytical expression of particle velocity with nonzero initial velocity in a Mach 0.5 burner rig (0.305 m long duct).</table>

Modelling and Simulation in Engineering

fig9

Figure 9

Figure 9: CFD-Guided Development of Test Rigs for Studying Erosion and Large-Particle Damage of Thermal Barrier Coatings 