- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Modelling and Simulation in Engineering
Volume 2012 (2012), Article ID 567864, 8 pages
doi:10.1155/2012/567864
Turbulent and Transitional Modeling of Drag on Oceanographic Measurement Devices
1School of Engineering, University of St. Thomas, 2115 Summit Aveune, St. Paul, MN 55105-1079, USA
2ENEA, UTMAR-OSS, Forte S. Teresa, 19032 Pozzuolo di Lerici, Italy
3Department of Mechanical Engineering, University of Minnesota, 111 Church Street SE, Minneapolis, MN 55455-0111, USA
4Department of Mechanical and Industrial Engineering, University of Illinois at Chicago, Chicago, IL 60607, USA
Received 3 October 2011; Accepted 11 January 2012
Academic Editor: Guan Heng Yeoh
Copyright © 2012 J. P. Abraham et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
J. P. Abraham, J. M. Gorman, F. Reseghetti, E. M. Sparrow, and W. J. Minkowycz, “Turbulent and Transitional Modeling of Drag on Oceanographic Measurement Devices,” Modelling and Simulation in Engineering, vol. 2012, Article ID 567864, 8 pages, 2012. doi:10.1155/2012/567864