- About this Journal ·
- Abstracting and Indexing ·
- Advance Access ·
- Aims and Scope ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
Modelling and Simulation in Engineering
Volume 2012 (2012), Article ID 639865, 8 pages
Analyzing the Diverging Diamond Interchange Using Discrete Event Simulation
1Department of Civil Engineering, University of Alabama in Huntsville, Huntsville, AL 35899, USA
2Center for Management and Economic Research, University of Alabama in Huntsville, Huntsville, AL 35899, USA
3Department of Computer Science, University of Hamburg, Vogt-Keolln-Straße 30, 22527 Hamburg, Germany
Received 23 April 2012; Revised 19 October 2012; Accepted 20 October 2012
Academic Editor: Azah Mohamed
Copyright © 2012 Michael Anderson et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
- V. Chilukuri, S. Siromaskul, M. Trueblood, and T. Regan, “Diverging diamond interchange performance evaluation (I-44 & Route 13),” Tech. Rep., HDR Engineering, Organizational Results Research Report for Missouri Department of Transportation, 2011.
- ProcessModel, Users Manual, ProcessModel Corporation, Provo, Utah, USA, 1999.
- G. Chlewicki, “New interchange and intersection designs: the synchronized split-phasing intersection and the diverging diamond interchange,” in Proceedings of the 2nd Urban Street Symposium, Anaheim, Calif, USA, July 2003.
- V. Inman, J. Williams, R. Cartwright, B. Wallick, P. Chou, and M. Baumgartner, “Evaluation of the diverging diamond interchange,” TECHBRIEF FHWA-HRT-07-048, U.S. Department of Transportation, Federal Highway Administration, Washington, DC, USA, 2010, FHWA contact: J. Bared, 202-493-3314.
- W. Hughes and R. Jagannathan, “Double crossover diamond interchange,” TECHBRIEF FHWA-HRT-09-054, U.S. Department of Transportation, Federal Highway Administration, Washington, DC, USA, 2010, FHWA contact: J. Bared, 202-493-3314.
- H. Xu, H. Liu, Z. Tian, and W. Zhang, “Control delay calculation at diverging diamond interchanges,” Transportation Research Record: Journal of the Transportation Research Board, no. 2257, pp. 121–130, 2011.
- G. Chlewicki, “Should the diverging diamond interchange always be considered a diamond interchange form?” Transportation Research Record: Journal of the Transportation Research Board, vol. 2223, pp. 88–95, 2011.
- M. Anderson, B. Schroer, and D. Moeller, “Simulation of the diverging diamond interchange,” UAH Research Report, University of Alabama in Huntsville, Huntsville, Ala, USA, 2011.