About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [165 citations: 1–100 of 160 articles]

Articles published in Smart Materials Research have been cited 165 times. The following is a list of the 160 articles that have cited the articles published in Smart Materials Research.

  • Viktor V. Brus, Samuel D. Collins, Oleksandr V. Mikhnenko, Ming Wang, Guillermo C. Bazan, and Thuc-Quyen Nguyen, “Fabricating Low-Cost Ionic-Organic Electronic Ratchets with Graphite Pencil and Adhesive Tape,” Advanced Electronic Materials, vol. 2, no. 4, 2016. View at Publisher · View at Google Scholar
  • Constantin E. Chalioris, Chris G. Karayannis, Georgia M. Angeli, Nikos A. Papadopoulos, Maria J. Favvata, and Costas P. Providakis, “Applications of Smart Piezoelectric Materials in a Wireless Admittance Monitoring System (WiAMS) to Structures—Tests in RC Elements,” Case Studies in Construction Materials, 2016. View at Publisher · View at Google Scholar
  • M. V. Takarkhede, S. A. Band, K. R. Nemade, and S. A. Fadanavis, “Effect of sintering temperature on complex optical properties of 0.8 (PbMg1/3Nb2/3O3)-0.2(PbTiO3) system,” Ceramics International, vol. 42, no. 1, pp. 1021–1025, 2016. View at Publisher · View at Google Scholar
  • D.A. Vinnik, D.A. Zherebtsov, S.A. Gudkova, R. Niewa, N.S. Zabeivorota, and F.V. Podgornov, “Broadband impedance spectroscopic characterization of PbTiO3 crystal grown by spontaneous crystallization from molten oxides,” Ceramics International, 2016. View at Publisher · View at Google Scholar
  • André Duarte B.L. Ferreira, Paulo R.O. Nóvoa, and António Torres Marques, “Multifunctional Material Systems: A State-of-the-Art Review,” Composite Structures, 2016. View at Publisher · View at Google Scholar
  • Chris G. Karayannis, Constantin E. Chalioris, Georgia M. Angeli, Nikos A. Papadopoulos, Maria J. Favvata, and Costas P. Providakis, “Experimental damage evaluation of reinforced concrete steel bars using piezoelectric sensors,” Construction and Building Materials, vol. 105, pp. 227–244, 2016. View at Publisher · View at Google Scholar
  • Maristella E. Voutetaki, Nikos A. Papadopoulos, Georgia M. Angeli, and Costas P. Providakis, “Investigation of a new experimental method for damage assessment of RC beams failing in shear using piezoelectric transducers,” Engineering Structures, vol. 114, pp. 226–240, 2016. View at Publisher · View at Google Scholar
  • P. Harris, C. R. Bowen, H. A. Kim, and G. Litak, “Dynamics of a vibrational energy harvester with a bistable beam: voltage response identification by multiscale entropy and "0-1" test,” European Physical Journal Plus, vol. 131, no. 4, 2016. View at Publisher · View at Google Scholar
  • M. Chandraiah, B. Sahoo, and P. K. Panda, “Synthesis and electrical properties of CaO doped BZT lead free piezo ceramics,” Ferroelectrics, vol. 494, no. 1, pp. 192–199, 2016. View at Publisher · View at Google Scholar
  • Ehsan Ghobadi, Rakulan Sivanesapillai, Jana Musialak, and Holger Steeb, “ Modeling Based Characterization of Thermorheological Properties of Polyurethane ESTANE ,” International Journal of Polymer Science, vol. 2016, pp. 1–11, 2016. View at Publisher · View at Google Scholar
  • X. -Y. Li, R. -F. Zheng, G. Z. Kang, W. -Q. Chen, and R. Mueller, “Closed-form field in an infinite space of transversely isotropic multiferroic composite medium with an elliptical or penny-shaped crack: 3D exact anal,” International Journal Of Solids And Structures, vol. 80, pp. 96–117, 2016. View at Publisher · View at Google Scholar
  • Leila Hassaini, Mustapha Kaci, Aida Benhamida, Stephane Bruzaud, Isabelle Pillin, and Yves Grohens, “The effects of PHBV-g-MA compatibilizer on morphology and properties of poly(3-hydroxybutyrate-Co-3-hydroxyvalerate)/olive husk flour composites,” Journal Of Adhesion Science And Technology, vol. 30, no. 19, pp. 2061–2080, 2016. View at Publisher · View at Google Scholar
  • Soheil Saedi, Ali Sadi Turabi, Mohsen Taheri Andani, Christoph Haberland, Haluk Karaca, and Mohammad Elahinia, “The influence of heat treatment on the thermomechanical response of Ni-rich NiTi alloys manufactured by selective laser melting,” Journal Of Alloys And Compounds, vol. 677, pp. 204–210, 2016. View at Publisher · View at Google Scholar
  • Manoj Kumar Singh, and Debkumar Bandyopadhyay, “Design and synthesis of nanoporous perylene bis-imide linked metalloporphyrin frameworks and their catalytic activity,” Journal Of Chemical Sciences, vol. 128, no. 1, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • Charlotte Cochard, Xavier Bril, Orland Guedes, and Pierre-Eymeric Janolin, “Interpretation of Polar Orders Based on Electric Characterizations: Example of Pb(Yb $$_{1/2}$$ 1 / 2 Nb $$_{1/2}$$ 1 / 2 )O $$_3$$ 3 -PbTiO $$_3$$ 3 Solid Solution,” Journal of Electronic Materials, 2016. View at Publisher · View at Google Scholar
  • Mohammad Ahmadpoor, Bahram Notghi, and John C. Brigham, “A Generalized Iterative Approach to Improve Reduced-Order Model Accuracy for Inverse Problem Applications,” Journal of Engineering Mechanics, pp. 04016020, 2016. View at Publisher · View at Google Scholar
  • Alireza Farjoud, and Esmaeel A. Bagherpour, “Electromagnet design for magneto-rheological devices,” Journal Of Intelligent Material Systems And Structures, vol. 27, no. 1, pp. 51–70, 2016. View at Publisher · View at Google Scholar
  • Jonghwa Park, Youngoh Lee, Minjeong Ha, Seungse Cho, and Hyunhyub Ko, “Micro/nanostructured surfaces for self-powered and multifunctional electronic skins,” Journal Of Materials Chemistry B, vol. 4, no. 18, pp. 2999–3018, 2016. View at Publisher · View at Google Scholar
  • X. J. Yan, Y. L. Ge, and J. Van Humbeeck, “Influence of Different Thermo-mechanical Cycling Routes on Recovery Stresses of Annealed NiTi Wires,” Journal Of Materials Engineering And Performance, vol. 25, no. 1, pp. 267–273, 2016. View at Publisher · View at Google Scholar
  • Ajay Achath Mohanan, R Parthiban, and N Ramakrishnan, “Shadow mask assisted direct growth of ZnO nanowires as a sensing medium for surface acoustic wave devices using a thermal evaporation method,” Journal of Micromechanics and Microengineering, vol. 26, no. 2, pp. 025017, 2016. View at Publisher · View at Google Scholar
  • M Kök, F Dağdelen, A Aydoğdu, and Y Aydoğdu, “The change of transformation temperature on NiTi shape memory alloy by pressure and thermal ageing,” Journal of Physics: Conference Series, vol. 667, pp. 012011, 2016. View at Publisher · View at Google Scholar
  • F A Londoño, J A Eiras, and D Garcia, “The relationship between ferroelectric domain pattern and properties of PLT21 ceramics,” Journal of Physics: Conference Series, vol. 687, pp. 012098, 2016. View at Publisher · View at Google Scholar
  • Prasant Vijayaraghavan, Jonathan R. Brown, and Lisa M. Hall, “Modeling the Effect of Polymer Composition on Ionic Aggregation in Poly(propylene glycol)-Based Ionenes,” Macromolecular Chemistry And Physics, vol. 217, no. 8, pp. 930–939, 2016. View at Publisher · View at Google Scholar
  • Akanksha Singh, Sonatan Das, Mareddi Bharathkumar, D Revanth, Arb Karthik, Bala Sudhakara Sastry, and V Ramgopal Rao, “Low cost fabrication of polymer composite (h-ZnO + PDMS) material for piezoelectric device application,” Materials Research Express, vol. 3, no. 7, pp. 075702, 2016. View at Publisher · View at Google Scholar
  • C. Simoneau, V. Brailovski, and P. Terriault, “Design, manufacture and tensile properties of stochastic porous metallic structures,” Mechanics Of Materials, vol. 94, pp. 26–37, 2016. View at Publisher · View at Google Scholar
  • Yunbing Dong, Chunrong Xiong, Yilu Zhang, Shuai Xing, and Hong Jiang, “ Lithium-titanate-nanotube-supported WO 3 for enhancing transmittance contrast in electrochromics ,” Nanotechnology, vol. 27, no. 10, pp. 105704, 2016. View at Publisher · View at Google Scholar
  • Lavanya Varatharajan, Ankur Thapar, Tristan Lane, Alex B. Munster, and Alun Huw Davies, “Pharmacological adjuncts for chronic venous ulcer healing: a systematic review,” Phlebology, vol. 31, no. 5, pp. 356–365, 2016. View at Publisher · View at Google Scholar
  • Fuju Tai, Zhiheng Yuan, Shipeng Li, Qi Wang, Fuyang Liu, and Wei Wang, “ZmCIPK8, a CBL-interacting protein kinase, regulates maize response to drought stress,” Plant Cell Tissue And Organ Culture, vol. 124, no. 3, pp. 459–469, 2016. View at Publisher · View at Google Scholar
  • Hanyu Cao, Si Wang, Zhenyu Zhang, and Jiangyan Lou, “Prognostic Value of Overexpressed p16(INK4a) in Vulvar Cancer: A Meta-Analysis,” Plos One, vol. 11, no. 3, 2016. View at Publisher · View at Google Scholar
  • Farid Ullah Khan, and Izhar, “Hybrid acoustic energy harvesting using combined electromagnetic and piezoelectric conversion,” Review of Scientific Instruments, vol. 87, no. 2, pp. 025003, 2016. View at Publisher · View at Google Scholar
  • Akash Pandey, and A. Arockiarajan, “Actuation performance of macro-fiber composite (MFC): Modeling and Experimental studies,” Sensors and Actuators A: Physical, 2016. View at Publisher · View at Google Scholar
  • Peng Chen, Xian-Xu Bai, Li-Jun Qian, and Seung-Bok Choi, “A magneto-rheological fluid mount featuring squeeze mode: analysis and testing,” Smart Materials and Structures, vol. 25, no. 5, pp. 055002, 2016. View at Publisher · View at Google Scholar
  • Ahmad Shaaban, and Annette M Schmidt, “Progress in the remote-controlled activation of self-healing processes,” Smart Materials and Structures, vol. 25, no. 8, pp. 084018, 2016. View at Publisher · View at Google Scholar
  • Khaled E. El-Kelany, Philippe Carbonnière, Alessandro Erba, Jean-Marc Sotiropoulos, and Michel Rérat, “Piezoelectricity of Functionalized Graphene: A Quantum-Mechanical Rationalization,” The Journal of Physical Chemistry C, 2016. View at Publisher · View at Google Scholar
  • C. Delebarre, S. Grondel, and F. Rivart, “Autonomous piezoelectric structural health monitoring system for on-production line use,” Advances In Applied Ceramics, vol. 114, no. 4, pp. 205–210, 2015. View at Publisher · View at Google Scholar
  • M. Chandraiah, and P. K. Panda, “Effect of dopants (A=Mg2+, Ca2+ and Sr2+) on ferroelectric, dielectric and piezoelectric properties of (Ba(1-x)A(x)) (Ti0.98Zr0.02) O-3 lead-free piez,” Ceramics International, vol. 41, no. 6, pp. 8040–8045, 2015. View at Publisher · View at Google Scholar
  • Kais Mekki, William Derigent, Ahmed Zouinkhi, Eric Rondeau, André Thomas, and Mohamed Naceur Abdelkrim, “Non-Localized and Localized Data Storage in Large-Scale Communicating Materials: Probabilistic and Hop-Counter Approaches,” Computer Standards & Interfaces, 2015. View at Publisher · View at Google Scholar
  • Abu Raihan Mohammad Siddique, Shohel Mahmud, and Bill Van Heyst, “A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms,” Energy Conversion and Management, vol. 106, pp. 728–747, 2015. View at Publisher · View at Google Scholar
  • Vikrant Bhatnagar, and Philip Owende, “Energy harvesting for assistive and mobile applications,” Energy Science & Engineering, 2015. View at Publisher · View at Google Scholar
  • Jun Lei, Chuanzeng Zhang, and Tinh Quoc Bui, “Transient dynamic interface crack analysis in magnetoelectroelastic bi-materials by a time-domain BEM,” European Journal of Mechanics - A/Solids, vol. 49, pp. 146–157, 2015. View at Publisher · View at Google Scholar
  • P. K. Panda, and B. Sahoo, “PZT to Lead Free Piezo Ceramics: A Review,” Ferroelectrics, vol. 474, no. 1, pp. 128–143, 2015. View at Publisher · View at Google Scholar
  • Kais Mekki, William Derigent, Ahmed Zouinkhi, Eric Rondeau, André Thomas, and Mohamed Naceur Abdelkrim, “USEE: An uniform data dissemination and Energy Efficient protocol for communicating materials,” Future Generation Computer Systems, 2015. View at Publisher · View at Google Scholar
  • Alessia Viola, Vincenzo Franzitta, Giovanni Cipriani, Vincenzo Di Dio, Francesco Maria Raimondi, and Marco Trapanese, “A Magnetostrictive Electric Power Generator for Energy Harvesting From Traffic: Design and Experimental Verification,” Ieee Transactions On Magnetics, vol. 51, no. 11, 2015. View at Publisher · View at Google Scholar
  • Bahram Notghi, and John C. Brigham, “A computational approach for robust nondestructive test design maximizing characterization capabilities for solids and structures subject to uncertainty,” International Journal for Numerical Methods in Engineering, 2015. View at Publisher · View at Google Scholar
  • Angel Fernandez, Jose Antonio Dieste, Carlos Javierre, and Jorge Santolaria, “Surface Roughness Evolution Model for Finishing Using an Abrasive Tool on a Robot,” International Journal Of Advanced Robotic Systems, vol. 12, 2015. View at Publisher · View at Google Scholar
  • Matin Sadat Saneei Mousavi, Faranak Manteghi, Mohammadreza Kolahdouz, Reza Soleimanzadeh, M. Norouzi, and Z.Kolahdouz Esfahani, “Modification of green synthesized ZnO nanorods for actuation application,” Journal of Alloys and Compounds, 2015. View at Publisher · View at Google Scholar
  • A. Arciniega-Ceballos, M. Alatorre-Ibargueengoitia, B. Scheu, and D. B. Dingwell, “Analysis of source characteristics of experimental gas burst and fragmentation explosions generated by rapid decompression of volcanic rocks,” Journal Of Geophysical Research-Solid Earth, vol. 120, no. 7, pp. 5104–5116, 2015. View at Publisher · View at Google Scholar
  • Morteza Gorzin Mataee, Masood Taheri Andani, and Mohammad Elahinia, “Adaptive ankle-foot orthoses based on superelasticity of shape memory alloys,” Journal Of Intelligent Material Systems And Structures, vol. 26, no. 6, pp. 639–651, 2015. View at Publisher · View at Google Scholar
  • Zhenhua Tian, Lingyu Yu, and Cara Leckey, “Delamination detection and quantification on laminated composite structures with Lamb waves and wavenumber analysis,” Journal Of Intelligent Material Systems And Structures, vol. 26, no. 13, pp. 1723–1738, 2015. View at Publisher · View at Google Scholar
  • Erika M. A. Fuentes-Fernandez, Bruce E. Gnade, Manuel A. Quevedo-Lopez, Pradeep Shah, and H. N. Alshareef, “The effect of poling conditions on the performance of piezoelectric energy harvesters fabricated by wet chemistry,” Journal Of Materials Chemistry A, vol. 3, no. 18, pp. 9837–9842, 2015. View at Publisher · View at Google Scholar
  • M. R. Karamooz Ravari, M. Kadkhodaei, and A. Ghaei, “A Unit Cell Model for Simulating The Stress-Strain Response of Porous Shape Memory Alloys,” Journal of Materials Engineering and Performance, 2015. View at Publisher · View at Google Scholar
  • Kh. E. El-Kelany, Ph. Carbonniere, A. Erba, and M. Rerat, “Inducing a Finite In-Plane Piezoelectricity in Graphene with Low Concentration of Inversion Symmetry-Breaking Defects,” Journal Of Physical Chemistry C, vol. 119, no. 16, pp. 8966–8973, 2015. View at Publisher · View at Google Scholar
  • P Constantinou, and S Roy, “A non-linear 3D printed electromagnetic vibration energy harvester,” Journal of Physics: Conference Series, vol. 660, pp. 012092, 2015. View at Publisher · View at Google Scholar
  • W. Kochański, M. Boeff, Z. Hashemiyan, W. J. Staszewski, and P. K. Verma, “Modelling and Numerical Simulations of In-Air Reverberation Images for Fault Detection in Medical Ultrasonic Transducers: A Feasibility Study,” Journal of Sensors, vol. 2015, pp. 1–14, 2015. View at Publisher · View at Google Scholar
  • Ajay Achath Mohanan, R. Parthiban, and N. Ramakrishnan, “Alignment nature of ZnO nanowires grown on polished and nanoscale etched lithium niobate surface through self-seeding thermal evaporation method,” Materials Research Bulletin, vol. 68, pp. 35–41, 2015. View at Publisher · View at Google Scholar
  • Ahmadreza Eshghinejad, and Mohammad Elahinia, “Exact Solution for Bending of Shape Memory Alloy Beams,” Mechanics Of Advanced Materials And Structures, vol. 22, no. 10, pp. 829–838, 2015. View at Publisher · View at Google Scholar
  • M.A. Ahmed, Y.A. Hassanean, K.A. Assaf, S.I. EL-Dek, and M.A. Shawkey, “Piezoelectric response of MWCNTs/cement nanocomposites,” Microelectronic Engineering, 2015. View at Publisher · View at Google Scholar
  • N.V. Morozovsky, A.V. Semchenko, V.V. Sidsky, V.V. Kolos, A.S. Turtsevich, E.A. Eliseev, and A.N. Morozovska, “Effect of annealing on the charge–voltage characteristics of SrBi2(TaxNb1−x)2O9 films,” Physica B: Condensed Matter, 2015. View at Publisher · View at Google Scholar
  • Minh Quyen Le, Jean-Fabien Capsal, Mickaël Lallart, Yoann Hebrard, Andre Van Der Ham, Nicolas Reffe, Lionel Geynet, and Pierre-Jean Cottinet, “Review on energy harvesting for structural health monitoring in aeronautical applications,” Progress in Aerospace Sciences, 2015. View at Publisher · View at Google Scholar
  • Jozsef Karger-Kocsis, Haroon Mahmood, and Alessandro Pegoretti, “Recent advances in fiber/matrix interphase engineering for polymer composites,” Progress In Materials Science, vol. 73, pp. 1–43, 2015. View at Publisher · View at Google Scholar
  • Antonio De Luca, Roberto Bartolino, Miguel A. Correa-Duarte, M. Lucia Curri, Nicole F. Steinmetz, and Giuseppe Strangi, “Gain-assisted plasmonic metamaterials: mimicking nature to go across scales,” Rendiconti Lincei, vol. 26, no. S2, pp. 161–174, 2015. View at Publisher · View at Google Scholar
  • S. Sathiya, M. Umapathy, and B. Vasuki, “Performance enhanced piezo actuated resonant liquid pumping system with two degree of freedom (2-DOF) resonators,” Sensors and Actuators A: Physical, 2015. View at Publisher · View at Google Scholar
  • Vytautas Ostasevicius, Vytautas Markevicius, Vytautas Jurenas, Mindaugas Zilys, Mindaugas Cepenas, Laura Kizauskiene, and Virginija Gyliene, “Cutting tool vibration energy harvesting for wireless sensors applications,” Sensors And Actuators A-Physical, vol. 233, pp. 310–318, 2015. View at Publisher · View at Google Scholar
  • Aly Mousaad Aly, and Srinivasa Abburu, “On the Design of High-Rise Buildings for Multihazard: Fundamental Differences between Wind and Earthquake Demand,” Shock and Vibration, vol. 2015, pp. 1–22, 2015. View at Publisher · View at Google Scholar
  • Xuan Phu Do, and Seung-Bok Choi, “High Loaded Mounts for Vibration Control Using Magnetorheological Fluids: Review of Design Configuration,” Shock and Vibration, vol. 2015, pp. 1–18, 2015. View at Publisher · View at Google Scholar
  • Zhenhua Tian, Lingyu Yu, Cara Leckey, and Jeffrey Seebo, “Guided wave imaging for detection and evaluation of impact-induced delamination in composites,” Smart Materials and Structures, vol. 24, no. 10, pp. 105019, 2015. View at Publisher · View at Google Scholar
  • Bryan S Joyce, and Pablo A Tarazaga, “Developing an active artificial hair cell using nonlinear feedback control,” Smart Materials and Structures, vol. 24, no. 9, pp. 094004, 2015. View at Publisher · View at Google Scholar
  • M. Sanbi, R. Saadani, K. Sbai, and M. Rahmoune, “Thermal Effects on Vibration and Control of Piezocomposite Kirchhoff Plate Modeled by Finite Elements Method,” Smart Materials Research, vol. 2015, pp. 1–15, 2015. View at Publisher · View at Google Scholar
  • Manish Sharma, Aditya Chauhan, Rahul Vaish, and Vishal Singh Chauhan, “Finite element analysis on solar energy harvesting using ferroelectric polymer,” Solar Energy, vol. 115, pp. 722–732, 2015. View at Publisher · View at Google Scholar
  • Stephen Daynes, Xavier Lachenal, and Paul M. Weaver, “Concept for morphing airfoil with zero torsional stiffness,” Thin-Walled Structures, vol. 94, pp. 129–134, 2015. View at Publisher · View at Google Scholar
  • Mohammad Hossein Anisi, Gaddafi Abdul-Salaam, Mohd. Yamani Idna Idris, Ainuddin Wahid Abdul Wahab, and Ismail Ahmedy, “Energy harvesting and battery power based routing in wireless sensor networks,” Wireless Networks, 2015. View at Publisher · View at Google Scholar
  • Jae-Woo Kim, Godfrey Sauti, Emilie J. Siochi, Joseph G. Smith, Russell A. Wincheski, Roberto J. Cano, John W. Connell, and Kristopher E. Wise, “Toward High Performance Thermoset/Carbon Nanotube Sheet Nanocomposites via Resistive Heating Assisted Infiltration and Cure,” Acs Applied Materials & Interfaces, vol. 6, no. 21, pp. 18832–18843, 2014. View at Publisher · View at Google Scholar
  • M. Agop, L. Ochiuz, D. Timofte, V. Barlescu, M.N. Danila, L. Gheorghita, V.P. Paun, L.G. Solovastru, and C. Popa, “Some Aspects Concerning the "Memorization Effect" in Complex Fluid,” Acta Physica Polonica A, vol. 126, no. 3, pp. 663–670, 2014. View at Publisher · View at Google Scholar
  • Ubaidillah, Joko Sutrisno, Agus Purwanto, and Saiful Amri Mazlan, “Recent Progress on Magnetorheological Solids: Materials, Fabrication, Testing, and Applications,” Advanced Engineering Materials, 2014. View at Publisher · View at Google Scholar
  • Zhongsheng Chen, Bin Guo, Yanting Luo, and Yongmin Yang, “Numerical Investigations into the Effects of Multiple Parameters on Nonlinear Piezoelectric Vibration Energy Harvesters,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Asif Khan, Dmitri E. Nikonov, Sasikanth Manipatruni, Tahir Ghani, and Ian A. Young, “Voltage induced magnetostrictive switching of nanomagnets: Strain assisted strain transfer torque random access memory,” Applied Physics Letters, vol. 104, no. 26, pp. 262407, 2014. View at Publisher · View at Google Scholar
  • Asif Islam Khan, Pu Yu, Morgan Trassin, Michelle J. Lee, Long You, and Sayeef Salahuddin, “The effects of strain relaxation on the dielectric properties of epitaxial ferroelectric Pb(Zr0.2Ti0.8)TiO3 thin films,” Applied Physics Letters, vol. 105, no. 2, pp. 022903, 2014. View at Publisher · View at Google Scholar
  • Robert Bogue, “Smart materials: a review of capabilities and applications,” Assembly Automation, vol. 34, no. 1, pp. 16–22, 2014. View at Publisher · View at Google Scholar
  • Izabela K. Kuder, Andres F. Arrieta, and Paolo Ermanni, “Design Space of Embeddable Variable Stiffness Bi-Stable Elements for Morphing Applications,” Composite Structures, 2014. View at Publisher · View at Google Scholar
  • C. R. Bowen, H. A. Kim, P. M. Weaver, and S. Dunn, “Piezoelectric and ferroelectric materials and structures for energy harvesting applications,” Energy & Environmental Science, vol. 7, no. 1, pp. 25–44, 2014. View at Publisher · View at Google Scholar
  • Zhi Zhou, and Henry A. Sodano, “Vertically aligned BaTiO3 nanowire arrays for energy harvesting,” Energy & Environmental Science, vol. 7, no. 1, pp. 288–296, 2014. View at Publisher · View at Google Scholar
  • C. R. Bowen, J. Taylor, E. LeBoulbar, D. Zabek, A. Chauhan, and R. Vaish, “Pyroelectric materials and devices for energy harvesting applications,” Energy & Environmental Science, vol. 7, no. 12, pp. 3836–3856, 2014. View at Publisher · View at Google Scholar
  • Aditya Chauhan, Satyanarayan Patel, Gaurav Vats, and Rahul Vaish, “Enhanced Thermal Energy Harvesting Using Li, K-Doped Bi0.5Na0.5TiO3 Lead-Free Ferroelectric Ceramics,” Energy Technology, vol. 2, no. 2, pp. 205–209, 2014. View at Publisher · View at Google Scholar
  • Cui Yan, Yao Minglei, Zhang Qunying, Chen Xiaolong, Chu Jinkui, and Guan Le, “Properties of RF-Sputtered PZT Thin Films with Ti/Pt Electrodes,” International Journal of Polymer Science, vol. 2014, pp. 1–5, 2014. View at Publisher · View at Google Scholar
  • Minu A. Pillai, and Ezhilarasi Deenadayalan, “A review of acoustic energy harvesting,” International Journal of Precision Engineering and Manufacturing, vol. 15, no. 5, pp. 949–965, 2014. View at Publisher · View at Google Scholar
  • Charles Simoneau, Patrick Terriault, Jonathan Rivard, and Vladimir Brailovski, “Modeling of metallic foam morphology using the Representative Volume Element approach: Development and experimental validation,” International Journal of Solids and Structures, vol. 51, no. 21-22, pp. 3633–3641, 2014. View at Publisher · View at Google Scholar
  • Ashwin Rao, Annie Ruimi, and Arun R. Srinivasa, “Internal loops in superelastic shape memory alloy wires under torsion - Experiments and simulations/predictions,” International Journal of Solids and Structures, vol. 51, no. 25-26, pp. 4554–4571, 2014. View at Publisher · View at Google Scholar
  • A. Arciniega-Ceballos, M. Alatorre-Ibargüengoitia, B. Scheu, D. B. Dingwell, and H. Delgado-Granados, “Seismological analysis of conduit dynamics in fragmentation experiments,” Journal of Geophysical Research: Solid Earth, 2014. View at Publisher · View at Google Scholar
  • Zhengzheng Hu, Ralph C. Smith, Nathanial Burch, Michael Hays, and William S. Oates, “A modeling and uncertainty quantification framework for a flexible structure with macrofiber composite actuators operating in hysteretic regimes,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 2, pp. 204–228, 2014. View at Publisher · View at Google Scholar
  • S. Kapuria, and M. Yaqoob Yasin, “Coupled efficient layerwise finite element modeling for active vibration control of smart composite and sandwich shallow shells,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 16, pp. 2013–2036, 2014. View at Publisher · View at Google Scholar
  • Yipeng Wu, Adrien Badel, Fabien Formosa, Weiqun Liu, and Amen Agbossou, “Self-powered optimized synchronous electric charge extraction circuit for piezoelectric energy harvesting,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 17, pp. 2165–2176, 2014. View at Publisher · View at Google Scholar
  • Guenther Pfeifer, Wolf-Joachim Fischer, Martin Krause, Daniel Steinert, Eric Starke, and Uwe Marschner, “Piezoelectric two-layer plate for position stabilization,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 9, pp. 1163–1173, 2014. View at Publisher · View at Google Scholar
  • Zhenhua Tian, and Lingyu Yu, “Lamb wave frequency-wavenumber analysis and decomposition,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 9, pp. 1107–1123, 2014. View at Publisher · View at Google Scholar
  • Hwee Kwon Jung, HyeJin Jo, Gyuhae Park, David L. Mascarenas, and Charles R. Farrar, “Relative baseline features for impedance-based structural health monitoring,” Journal of Intelligent Material Systems and Structures, vol. 25, no. 18, pp. 2294–2304, 2014. View at Publisher · View at Google Scholar
  • Shashikala Prakash, C Karthikeyan, T G Renjith Kumar, P Radhakrishna, and P G Ravikiran, “Active Vibration Control of Composite Structures Using MicroBlaze™ Soft Core Processor on Virtex-4 FPGA,” Journal of Low Frequency Noise, Vibration and Active Control, vol. 33, no. 2, pp. 139–162, 2014. View at Publisher · View at Google Scholar
  • Masood Taheri Andani, and Mohammad Elahinia, “Modeling and Simulation of SMA Medical Devices Undergoing complex Thermo-mechanical Loadings,” Journal of Materials Engineering and Performance, 2014. View at Publisher · View at Google Scholar
  • Inwoo Chun, Hyun-Woo Lee, and Kwang-Ho Kwon, “Micro Electro-Mechanical System Piezoelectric Cantilever Array for a Broadband Vibration Energy Harvester,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 12, pp. 9253–9257, 2014. View at Publisher · View at Google Scholar
  • Abdulrahman Jbaily, and Ronald W. Yeung, “Piezoelectric devices for ocean energy: a brief survey,” Journal of Ocean Engineering and Marine Energy, 2014. View at Publisher · View at Google Scholar
  • Ali Gheibi, Masoud Latifi, Ali Akbar Merati, and Roohollah Bagherzadeh, “Piezoelectric electrospun nanofibrous materials for self-powering wearable electronic textiles applications,” Journal of Polymer Research, vol. 21, no. 7, 2014. View at Publisher · View at Google Scholar
  • Jernej Pavlič, Barbara Malič, and Tadej Rojac, “ Small Reduction of the Piezoelectric d 33 Response in Potassium Sodium Niobate Thick Films ,” Journal of the American Ceramic Society, 2014. View at Publisher · View at Google Scholar