Science and Technology of Nuclear Installations
Volume 2009 (2009), Article ID 687634, 11 pages
doi:10.1155/2009/687634
Research Article

Modelling of HTR Confinement Behaviour during Accidents Involving Breach of the Helium Pressure Boundary

1Unit of Nuclear Safety Research, CIEMAT, Avenida Complutense, 22 28040 Madrid, Spain
2Pebble Bed Modular Reactor (Pty) Limited, 1279 Mike Crawford Avenue, 0046 Centurion, South Africa

Received 30 January 2009; Revised 18 May 2009; Accepted 4 June 2009

Academic Editor: Jim Kuijper

Copyright © 2009 Joan Fontanet et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. P. Van Dorsselaere and B. Schwinges, “Overview of the integral code ASTEC V1.3,” IRSN Technical Note DPAM/ASTEC 2006-362, 2006, GRS Technical Note GRS ASTEC 06/02.
  2. K. K. Murata, “Code manual for CONTAIN 2.0: a computer code for nuclear reactor containment analysis,” NUREG/CR-6533, SAND97/1735, 1997.
  3. M. Sitarski and J. H. Seinfeld, “Brownian coagulation in the transition regime,” Journal of Colloid And Interface Science, vol. 61, no. 2, pp. 261–271, 1977. View at Publisher · View at Google Scholar
  4. U. Wawrzik, P. Biedermann, and H. F. Oetjen, “Staub im Avr-Reaktor; Verhalten Bei Transienten Strömungsbedingungen,” in Proceedings of the Jahrestagung Kerntechnik, Karlsruhe, Germany, 1987. View at Publisher · View at Google Scholar
  5. F. Gelbard, “MAEROS users manual,” NUREG/CR-1931, SAND80-0822, 1982. View at Publisher · View at Google Scholar
  6. W. C. Hinds, Aerosol Technology, John Wiley & Sons, New York, NY, USA, 2nd edition, 1999.
  7. J. R. Brock, “On the theory of thermal forces acting on aerosol particles,” Journal of Colloid Science, vol. 17, no. 8, pp. 768–780, 1962. View at Publisher · View at Google Scholar
  8. L. Talbot, R. K. Cheng, R. W. Schefer, and D. R. Willis, “Thermophoresis of particles in a heated boundary layer,” Journal of Fluid Mechanics, vol. 101, part 4, pp. 737–758, 1980. View at Publisher · View at Google Scholar
  9. B. K. Annis, “Thermal creep in gases,” The Journal of Chemical Physics, vol. 57, no. 7, pp. 2898–2905, 1972. View at Publisher · View at Google Scholar
  10. N. A. Fuchs, The Mechanics of Aerosols, Pergamon Press Book, New York, NY, USA, 1964.
  11. P. G. Saffman and J. S. Turner, “On the collision of drops in turbulent clouds,” Journal of Fluid Mechanics, vol. 1, pp. 16–30, 1956. View at Publisher · View at Google Scholar
  12. G. Weber, “ASTEC V0 Description of aerosol models in the containment part of ASTEC (CPA),” ASTEC-V0/DOC/99-20, 1999. View at Publisher · View at Google Scholar
  13. W. Klein-Hessling and B. Schwinges, “ASTEC V0. CPA module program reference manual,” ASTEC-V0/DOC/01-34, 1998. View at Publisher · View at Google Scholar
  14. A. Pitso, “MPS pipe break analysis calculation report,” private communication, 2007. View at Publisher · View at Google Scholar
  15. K. Sawa, T. Nishimoto, and Y. Miyamoto, “Experimental study of dust behaviour during depressurization,” Journal of Nuclear Science and Technology, vol. 29, no. 10, pp. 1018–1025, 1992.