About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [739 citations: 1–100 of 599 articles]

Articles published in Science and Technology of Nuclear Installations have been cited 739 times. The following is a list of the 599 articles that have cited the articles published in Science and Technology of Nuclear Installations.

  • Farrokh Khoshahval, and Abdol Aziz. Ahdavi, “Determination of the maximum speed of WWER-1000 nuclear reactor control rods,” Annals of Nuclear Energy, vol. 87, pp. 58–68, 2016. View at Publisher · View at Google Scholar
  • Francesco Di Maio, Matteo Vagnoli, and Enrico Zio, “Transient identification by clustering based on Integrated Deterministic and Probabilistic Safety Analysis outcomes,” Annals of Nuclear Energy, vol. 87, pp. 217–227, 2016. View at Publisher · View at Google Scholar
  • R. Pericas, K. Ivanov, F. Reventós, and L. Batet, “Code improvement and model validation for Ascó-II Nuclear Power Plant model using a coupled 3D neutron kinetics/thermal–hydraulic code,” Annals of Nuclear Energy, vol. 87, pp. 366–374, 2016. View at Publisher · View at Google Scholar
  • José L. Muñoz-Cobo, Alberto Escrivá, and María-Dolores Domingo, “In-phase instabilities in BWR with sub-cooled boiling, direct heating, and spacers effects,” Annals of Nuclear Energy, vol. 87, pp. 671–686, 2016. View at Publisher · View at Google Scholar
  • L. Fiorito, A. Stankovskiy, G. Van den Eynde, C.J. Diez, O. Cabellos, and P.E. Labeau, “Generation of fission yield covariances to correct discrepancies in the nuclear data libraries,” Annals of Nuclear Energy, vol. 88, pp. 12–23, 2016. View at Publisher · View at Google Scholar
  • Afshin Hedayat, “Developing a safe and high performance fuel management optimization for MTRs using stochastic knowledge base searches,” Annals of Nuclear Energy, vol. 90, pp. 157–174, 2016. View at Publisher · View at Google Scholar
  • Kwang-Il Ahn, Jae-Uk Shin, and Won-Tae Kim, “Severe accident analysis of plant-specific spent fuel pool to support a SFP risk and accident management,” Annals of Nuclear Energy, vol. 89, pp. 70–83, 2016. View at Publisher · View at Google Scholar
  • Julia Abdul Karim, Jun Nishiyama, and Toru Obara, “Application of melt and refining procedures in the CANDLE reactor concept,” Annals of Nuclear Energy, vol. 90, pp. 275–283, 2016. View at Publisher · View at Google Scholar
  • Miriam Knebel, Luigi Mercatali, Victor Sanchez, Robert Stieglitz, and Rafael Macian-Juan, “Validation of the Serpent 2-DYNSUB code sequence using the Special Power Excursion Reactor Test III (SPERT III),” Annals of Nuclear Energy, vol. 91, pp. 79–91, 2016. View at Publisher · View at Google Scholar
  • Dan Huang, Zan Wu, Bengt Sunden, and Wei Li, “A brief review on convection heat transfer of fluids at supercritical pressures in tubes and the recent progress,” Applied Energy, vol. 162, pp. 494–505, 2016. View at Publisher · View at Google Scholar
  • Hee Seo, Byung-Hee Won, Seong-Kyu Ahn, Seung Kyu Lee, Se-Hwan Park, Geun-Il Park, and Spencer H. Menlove, “Optimization of hybrid-type instrumentation for Pu accountancy of U/TRU ingot in pyroprocessing,” Applied Radiation and Isotopes, vol. 108, pp. 16–23, 2016. View at Publisher · View at Google Scholar
  • Ashish Mani Mishra, and Suneet Singh, “Non linear stability analysis of uniformly heated parallel channels for different inclinations,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • J. Malet, and Z. Parduba, “Experimental Characterization Of Vver-440 Reactor Containment Type Spray Nozzle,” Atomization And Sprays, vol. 26, no. 3, pp. 235–255, 2016. View at Publisher · View at Google Scholar
  • Gregory Lecrivain, Rohan Rayan, Antonio Hurtado, and Uwe Hampel, “Using quasi-DNS to investigate the deposition of elongated aerosol particles in a wavy channel flow,” Computers & Fluids, vol. 124, pp. 78–85, 2016. View at Publisher · View at Google Scholar
  • Hanbing Bian, Yun Jia, Jianfu Shao, and Christophe Pontiroli, “Numerical study of a concrete target under the penetration of rigid projectile using an elastoplastic damage model,” Engineering Structures, vol. 111, pp. 525–537, 2016. View at Publisher · View at Google Scholar
  • Ashish Mani Mishra, and Suneet Singh, “Subcritical and supercritical bifurcations for two-phase flow in a uniformly heated channel with different inclinations,” International Journal of Heat and Mass Transfer, vol. 93, pp. 235–249, 2016. View at Publisher · View at Google Scholar
  • Jayaraj Yallappa Kudariyawar, Abhijeet Mohan Vaidya, Naresh Kumar Maheshwari, and Polepalle Satyamurthy, “Computational study of instabilities in a rectangular natural circulation loop using 3D CFD simulation,” International Journal of Thermal Sciences, vol. 101, pp. 193–206, 2016. View at Publisher · View at Google Scholar
  • Jung-Hoon Choi, Hee-Chul Eun, Ki-Rak Lee, In-Hak Cho, Tae-Kyo Lee, Hwan-Seo Park, and Do-Hee Ahn, “Fabrication of rare earth calcium phosphate glass waste forms for the immobilization of rare earth phosphates generated from pyrochemical process,” Journal of Non-Crystalline Solids, vol. 434, pp. 79–84, 2016. View at Publisher · View at Google Scholar
  • Yongjae Lee, Wonjun Choi, Seungwon Seo, Hwan-Yeol Kim, and Sung Joong Kim, “Development of safety injection flow map associated with target depressurization for effective severe accident management of OPR1000,” Journal of Nuclear Science and Technology, pp. 1–11, 2016. View at Publisher · View at Google Scholar
  • Alexei Miassoedov, Giancarlo Albrecht, Leonhard Meyer, and Renaud Meignen, “Ex-vessel fuel-coolant interaction experiment in the DISCO facility in the LACOMECO project,” Journal of Nuclear Science and Technology, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • J.-F. Ciparisse, A. Malizia, L. A. Poggi, O. Cenciarelli, M. Gelfusa, M. C. Carestia, D. Di Giovanni, S. Mancinelli, L. Palombi, C. Bellecci, and P. Gaudio, “Numerical Simulations as Tool to Predict Chemical and Radiological Hazardous Diffusion in Case of Nonconventional Events,” Modelling and Simulation in Engineering, vol. 2016, pp. 1–11, 2016. View at Publisher · View at Google Scholar
  • S. Carlos, A. Querol, S. Gallardo, F. Sanchez-Saez, J.F. Villanueva, S. Martorell, and G. Verdú, “Post-test analysis of the ROSA/LSTF and PKL counterpart test,” Nuclear Engineering and Design, vol. 297, pp. 81–94, 2016. View at Publisher · View at Google Scholar
  • Timo Ikonen, “Comparison of global sensitivity analysis methods – Application to fuel behavior modeling,” Nuclear Engineering and Design, vol. 297, pp. 72–80, 2016. View at Publisher · View at Google Scholar
  • Ugur Mertyurek, and Ian C. Gauld, “Development of ORIGEN libraries for mixed oxide (MOX) fuel assembly designs,” Nuclear Engineering and Design, vol. 297, pp. 220–230, 2016. View at Publisher · View at Google Scholar
  • Marcello Ferrini, Walter Borreani, Guglielmo Lomonaco, and Fabrizio Magugliani, “Design by theoretical and CFD analyses of a multi-blade screw pump evolving liquid lead for a Generation IV LFR,” Nuclear Engineering and Design, vol. 297, pp. 276–290, 2016. View at Publisher · View at Google Scholar
  • David William Hummel, and David Raymond Novog, “Coupled 3D neutron kinetics and thermalhydraulic characteristics of the Canadian supercritical water reactor,” Nuclear Engineering and Design, vol. 298, pp. 78–89, 2016. View at Publisher · View at Google Scholar
  • Kyung-Fun Song, “ Cetacean Strandings in Korean Waters 1 ,” Pacific Science, vol. 70, no. 1, pp. 35–44, 2016. View at Publisher · View at Google Scholar
  • Antonio Cipollaro, and Guglielmo Lomonaco, “Contributing to the nuclear 3S's via a methodology aiming at enhancing the synergies between nuclear security and safety,” Progress in Nuclear Energy, vol. 86, pp. 31–39, 2016. View at Publisher · View at Google Scholar
  • S. Quezada–García, E.-G. Espinosa–Martínez, G. Espinosa–Paredes, and A. Vázquez–Rodríguez, “Power–feedwater temperature operating domain for a BWR driven by natural convection,” Progress in Nuclear Energy, vol. 86, pp. 110–119, 2016. View at Publisher · View at Google Scholar
  • Afshin Hedayat, “Benchmarking verification of the control rod effects on the MTR core parameters using the MTR-PC and MCNP codes throughout 3D core modeling and rod-drop experiment,” Progress in Nuclear Energy, vol. 88, pp. 183–190, 2016. View at Publisher · View at Google Scholar
  • Licia Del Frate, Fabio Moretti, Giorgio Galassi, and Francesco D’Auria, “Limitations in the Use of the Equivalent Diameter,” World Journal of Nuclear Science and Technology, vol. 06, no. 01, pp. 53–62, 2016. View at Publisher · View at Google Scholar
  • I. Akkurt, H.O. Tekin, and A. Mesbahi, “Calculation of Detection Efficiency for the Gamma Detector using MCNPX,” Acta Physica Polonica A, vol. 128, no. 2B, pp. B-332–B-335, 2015. View at Publisher · View at Google Scholar
  • Yuichi Kato, Luis K. Ono, Michael V. Lee, Shenghao Wang, Sonia R. Raga, and Yabing Qi, “Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes,” Advanced Materials Interfaces, 2015. View at Publisher · View at Google Scholar
  • Sang-Chae Jeon, Jae-Won Lee, Ju-Ho Lee, Sang-Jun Kang, Kwang-Yun Lee, Yung-Zun Cho, Do-Hee Ahn, and Kee-Chan Song, “ Fabrication of UO 2 Porous Pellets on a Scale of 30 kg-U/Batch at the PRIDE Facility ,” Advances in Materials Science and Engineering, vol. 2015, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Song Chen, Jin Huang, Kailin Jian, and Jun Ding, “Analysis of Influence of Temperature on Magnetorheological Fluid and Transmission Performance,” Advances in Materials Science and Engineering, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • Waleed Abd el Bar, Imbaby I. Mahmoud, Hussein A. Konber, and T. Mongy, “Image reconstruction technique using projection data from neutron tomography system,” Alexandria Engineering Journal, 2015. View at Publisher · View at Google Scholar
  • Zhuojun Yan, Ye Yuan, Yuyang Tian, Daming Zhang, and Guangshan Zhu, “Highly Efficient Enrichment of Volatile Iodine by Charged Porous Aromatic Frameworks with Three Sorption Sites,” Angewandte Chemie-International Edition, vol. 54, no. 43, pp. 12733–12737, 2015. View at Publisher · View at Google Scholar
  • Máté Szieberth, Gergely Klujber, Jan Leen Kloosterman, and Dick de Haas, “Measurement of multiple α-modes at the Delphi subcritical assembly by neutron noise techniques,” Annals of Nuclear Energy, vol. 75, pp. 146–157, 2015. View at Publisher · View at Google Scholar
  • K. Podila, and Y.F. Rao, “CFD analysis of flow and heat transfer in Canadian supercritical water reactor bundle,” Annals of Nuclear Energy, vol. 75, pp. 1–10, 2015. View at Publisher · View at Google Scholar
  • Seong-Kyu Ahn, Chung-Seok Seo, Eun-ha Kwon, and Ho-Dong Kim, “Linkage options between unit process to enhance proliferation resistance of pyroprocessing,” Annals Of Nuclear Energy, vol. 75, pp. 184–188, 2015. View at Publisher · View at Google Scholar
  • Thanh Mai Vu, and Takanori Kitada, “Seed and blanket thorium-reprocessed fuel ADS: Multi-cycle approach for higher thorium utilization and TRU transmutation,” Annals of Nuclear Energy, vol. 75, pp. 438–442, 2015. View at Publisher · View at Google Scholar
  • Seyed Mohsen Ayyoubzadeh, Naser Vosoughi, and Seyed Mohammad Ayyoubzadeh, “On the second moment of a stochastic radiation field,” Annals of Nuclear Energy, vol. 75, pp. 283–291, 2015. View at Publisher · View at Google Scholar
  • Sandip Ghosh, and Samir Kumar Saha, “Experimental validation of RELAP5 predictions for subcooled leak flow through narrow circumferential slits,” Annals Of Nuclear Energy, vol. 75, pp. 507–515, 2015. View at Publisher · View at Google Scholar
  • Ting Zhu, Alexander Vasiliev, Hakim Ferroukhi, and Andreas Pautz, “NUSS: A tool for propagating multigroup nuclear data covariances in pointwise ACE-formatted nuclear data using stochastic sampling method,” Annals of Nuclear Energy, vol. 75, pp. 713–722, 2015. View at Publisher · View at Google Scholar
  • Bart L. Sjenitzer, J. Eduard Hoogenboom, Javier Jiménez Escalante, and Victor Sanchez Espinoza, “Coupling of dynamic Monte Carlo with thermal-hydraulic feedback,” Annals of Nuclear Energy, vol. 76, pp. 27–39, 2015. View at Publisher · View at Google Scholar
  • Donny Hartanto, and Yonghee Kim, “Alternative reflectors for a compact sodium-cooled breed-and-burn fast reactor,” Annals of Nuclear Energy, vol. 76, pp. 113–124, 2015. View at Publisher · View at Google Scholar
  • Dong Gu Kang, and Seung-Hoon Ahn, “Thermal–hydraulic analysis and code assessment for ATLAS 6-inch cold leg break (SBLOCA) test using MARS-KS,” Annals of Nuclear Energy, vol. 76, pp. 243–252, 2015. View at Publisher · View at Google Scholar
  • L. P. Tucker, A. Alajo, and S. Usman, “Thorium-based mixed oxide fuel in a pressurized water reactor: A beginning of life feasibility analysis with MCNP,” Annals Of Nuclear Energy, vol. 76, pp. 323–334, 2015. View at Publisher · View at Google Scholar
  • T. Malinovitch, and C. Dubi, “A multi-region multi-energy formalism for the Feynman-alpha formulas,” Annals of Nuclear Energy, vol. 76, pp. 297–304, 2015. View at Publisher · View at Google Scholar
  • C. J. Diez, O. Buss, A. Hoefer, D. Porsch, and O. Cabellos, “Comparison of nuclear data uncertainty propagation methodologies for PWR burn-up simulations,” Annals Of Nuclear Energy, vol. 77, pp. 101–114, 2015. View at Publisher · View at Google Scholar
  • Devin Rappleye, Sang-Mun Jeong, and Michael Simpson, “Application of multivariate analysis techniques to safeguards of the electrochemical treatment of used nuclear fuel,” Annals of Nuclear Energy, vol. 77, pp. 265–272, 2015. View at Publisher · View at Google Scholar
  • A. Hoefer, O. Buss, M. Hennebach, M. Schmid, and D. Porsch, “MOCABA: A general Monte Carlo–Bayes procedure for improved predictions of integral functions of nuclear data,” Annals of Nuclear Energy, vol. 77, pp. 514–521, 2015. View at Publisher · View at Google Scholar
  • Bruno Gonfiotti, and Sandro Paci, “Analysis of the THAI Iod-11 and Iod-12 tests: Advancements and limitations of ASTEC V2.0R3p1 and MELCOR V2.1.4803,” Annals of Nuclear Energy, vol. 77, pp. 451–476, 2015. View at Publisher · View at Google Scholar
  • Thanh Mai Vu, and Takanori Kitada, “Seed and blanket ADS using thorium–reprocessed fuel: Parametric survey on TRU transmutation performance and safety characteristics,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • A. Ivanov, V. Sanchez, R. Stieglitz, and K. Ivanov, “Large-scale Monte Carlo neutron transport calculations with thermal hydraulic feedback,” Annals Of Nuclear Energy, vol. 84, pp. 204–219, 2015. View at Publisher · View at Google Scholar
  • Santiago Corzo, Damian Ramajo, and Norberto Nigro, “1/3D modeling of the core coolant circuit of a PHWR nuclear power plant,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • M. A. B. Alvarenga, and P. F. Frutuoso e Melo, “Including severe accidents in the design basis of nuclear power plants: An organizational factors perspective after the Fukushima accident,” Annals Of Nuclear Energy, vol. 79, pp. 68–77, 2015. View at Publisher · View at Google Scholar
  • Yu Li, Nan Gui, Xingtuan Yang, Jiyuan Tu, and Shengyao Jiang, “Effect of wall structure on pebble stagnation behavior in pebble bed reactor,” Annals Of Nuclear Energy, vol. 80, pp. 195–202, 2015. View at Publisher · View at Google Scholar
  • Han Wang, Qincheng Bi, Zhendong Yang, and Linchuan Wang, “Experimental and numerical investigation of heat transfer from a narrow annulus to supercritical pressure water,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • Zhao Chen, Xue-Nong Chen, Andrei Rineiski, Pengcheng Zhao, and Hongli Chen, “Coupling a CFD code with neutron kinetics and pin thermal models for nuclear reactor safety analyses,” Annals Of Nuclear Energy, vol. 83, pp. 41–49, 2015. View at Publisher · View at Google Scholar
  • Klaus Hendrik Biss, and Bruno Thomauske, “Shortening transmutation time by using the molten salt reactor,” Annals of Nuclear Energy, vol. 83, pp. 25–33, 2015. View at Publisher · View at Google Scholar
  • R. Vanhanen, and M. Pusa, “Survey of prediction capabilities of three nuclear data libraries for a PWR application,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • Staffan Qvist, Jason Hou, and Ehud Greenspan, “Design and performance of 2D and 3D-shuffled breed-and-burn cores,” Annals of Nuclear Energy, vol. 85, pp. 93–114, 2015. View at Publisher · View at Google Scholar
  • M.A. Polo-Labarrios, and G. Espinosa-Paredes, “Comparative study of the hydrogen generation during short term station blackout (STSBO) in a BWR,” Annals of Nuclear Energy, vol. 83, pp. 274–282, 2015. View at Publisher · View at Google Scholar
  • Otso-Pekka Kauppinen, Virpi Kouhia, Vesa Riikonen, Juhani Hyvärinen, and Heikki Sjövall, “Computer analyses on loop seal clearing experiment at PWR PACTEL,” Annals of Nuclear Energy, vol. 85, pp. 47–57, 2015. View at Publisher · View at Google Scholar
  • Alfonso Prieto-Guerrero, Gilberto Espinosa-Paredes, and Gerardo Abel Laguna-Sanchez, “Stability monitor for Boiling Water Reactors based on the Multivariate Empirical Mode Decomposition,” Annals Of Nuclear Energy, vol. 85, pp. 453–460, 2015. View at Publisher · View at Google Scholar
  • Marco Pecchia, Carlo Parisi, Francesco D’Auria, and Oscar Mazzantini, “Application of MCNP for predicting power excursion during LOCA in Atucha-2 PHWR,” Annals of Nuclear Energy, vol. 85, pp. 271–278, 2015. View at Publisher · View at Google Scholar
  • Tae Young Han, Hyun Chul Lee, and Jae Man Noh, “Development of a sensitivity and uncertainty analysis code for high temperature gas-cooled reactor physics based on the generalized perturbation theory,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • C. Queral, J. Montero-Mayorga, J. Gonzalez-Cadelo, and G. Jimenez, “AP1000® Large-Break LOCA BEPU analysis with TRACE code,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • Carlos E. Velasquez, Graiciany de P. Barros, Claubia Pereira, Maria Auxiliadora F. Veloso, and Antonella L. Costa, “Evaluation of subcritical hybrid systems loaded with reprocessed fuel,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • Gonzalo Jimenez, Cesar Serrano, Emma Lopez-Alonso, Ma del Carmen Molina, Daniel Calvo, Javier Garcia, Cesar Queral, J. Vicente Zuriaga, and Montserrat Gonzalez, “BWR Mark III containment analyses using a GOTHIC 8.0 3D model,” Annals Of Nuclear Energy, vol. 85, pp. 687–703, 2015. View at Publisher · View at Google Scholar
  • Mario Matijević, Dubravko Pevec, and Krešimir Trontl, “Boration modeling of the PWR biological shield using SCALE6.1 hybrid shielding methodology,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • Mohammad Mizanur Rahman, Mehrdad Shahmohammadi Beni, Jingkang Gui, and Jiyun Zhao, “Hydraulic lift-off issues for application of high performance annular fuels in pressurized water reactors,” Annals Of Nuclear Energy, vol. 85, pp. 1018–1023, 2015. View at Publisher · View at Google Scholar
  • Fahad Wallam, Adeel Abbas, and Abdul Rehman Abbasi, “Design and tuning of a Decentralized Fuzzy Logic Controller for a MIMO type Pressurized Heavy Water Reactor,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • Yu Liu, Daogang Lu, Junjie Dang, Shu Wang, and Xiaojia Zeng, “Equivalent mechanical model for structural dynamic analysis of elevated tank like AP1000 PCCWST,” Annals of Nuclear Energy, 2015. View at Publisher · View at Google Scholar
  • Srisharan G. Govindarajan, and Gary L. Solbrekken, “Effects study on the thermal stresses in a LEU metal foil annular target,” Applied Radiation and Isotopes, vol. 103, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Hamed Setoodeh, Ali Keshavarz, Ali Ghasemian, and Amin Nasouhi, “Subcooled flow boiling of alumina/water nanofluid in a channel with a hot spot: An experimental study,” Applied Thermal Engineering, 2015. View at Publisher · View at Google Scholar
  • Antonello E. Spinelli, Carmen R. Gigliotti, and Federico Boschi, “Unified approach for bioluminescence, Cerenkov, β, X and γ rays imaging,” Biomedical Optics Express, vol. 6, no. 6, pp. 2168, 2015. View at Publisher · View at Google Scholar
  • Abdollah Khorshidi, “Exploration of Adiabatic Resonance Crossing Through Neutron Activator Design for Thermal and Epithermal Neutron Formation in Mo-99 Production and BNCT,” Cancer Biotherapy And Radiopharmaceuticals, vol. 30, no. 8, pp. 317–329, 2015. View at Publisher · View at Google Scholar
  • Hassan Badreddine, Yohei Sato, Bojan Niceno, and Horst-Michael Prasser, “Finite size Lagrangian particle tracking approach to simulate dispersed bubbly flows,” Chemical Engineering Science, vol. 122, pp. 321–335, 2015. View at Publisher · View at Google Scholar
  • D.E. Ruiz, A. Cammi, and L. Luzzi, “Dynamic stability of natural circulation loops for single phase fluids with internal heat generation,” Chemical Engineering Science, vol. 126, pp. 573–583, 2015. View at Publisher · View at Google Scholar
  • T. Ma, D. Lucas, T. Ziegenhein, J. Fröhlich, and N.G. Deen, “Scale-adaptive simulation of a square cross-sectional bubble column,” Chemical Engineering Science, 2015. View at Publisher · View at Google Scholar
  • Tom Burr, Michael S. Hamada, Larry Ticknor, and James Sprinkle, “Hybrid Statistical Testing for Nuclear Material Accounting Data and/or Process Monitoring Data in Nuclear Safeguards,” Energies, vol. 8, no. 1, pp. 501–528, 2015. View at Publisher · View at Google Scholar
  • B. Yolanda Moratilla Soria, Rosario Ruiz-Sanchez, Mathilde Estadieu, Borja Belda-Sanchez, Cristina Cordon-Peralta, Paula Martin-Canas, Laura Rodriguez-Penalonga, M. del Mar Cledera-Castro, M. Ana Saenz-Nuno, and Carlos Morales-Polo, “Impact of the Taxes on Used Nuclear Fuel on the Fuel Cycle Economics in Spain,” Energies, vol. 8, no. 2, pp. 1426–1439, 2015. View at Publisher · View at Google Scholar
  • Vladimir Kuznetsov, Galina Fesenko, Aleksandra Schwenk-Ferrero, Andrei Andrianov, and Ilya Kuptsov, “Innovative Nuclear Energy Systems: State-of-the Art Survey on Evaluation and Aggregation Judgment Measures Applied to Performance Comparison,” Energies, vol. 8, no. 5, pp. 3679–3719, 2015. View at Publisher · View at Google Scholar
  • Sungki Kim, Wonil Ko, and Sungsig Bang, “Analysis of Unit Process Cost for an Engineering-Scale Pyroprocess Facility Using a Process Costing Method in Korea,” Energies, vol. 8, no. 8, pp. 8775–8797, 2015. View at Publisher · View at Google Scholar
  • Tiejun Zu, Hongchun Wu, Youqi Zheng, and Liangzhi Cao, “Economics analysis of fuel cycle cost of fusion–fission hybrid reactors based on different fuel cycle strategies,” Fusion Engineering and Design, 2015. View at Publisher · View at Google Scholar
  • Hesheng Wang, Yinping Lai, Weidong Chen, and Qixin Cao, “Design and implementation of motion planning of inspection and maintenance robot for ITER-like vessel,” Fusion Engineering and Design, vol. 101, pp. 111–123, 2015. View at Publisher · View at Google Scholar
  • Nikhil Bagalkot, and Govindarajan Suresh Kumar, “Numerical modeling of two species radionuclide transport in a single fracture-matrix system with variable fracture aperture,” Geosciences Journal, 2015. View at Publisher · View at Google Scholar
  • Guoyu Chen, Guixiong Liu, Bingeng Zhu, and Wensheng Tan, “3D Isosceles Triangular Ultrasonic Path of Transit-Time Ultrasonic Flowmeter: Theoretical Design and CFD Simulations,” Ieee Sensors Journal, vol. 15, no. 9, pp. 4733–4742, 2015. View at Publisher · View at Google Scholar
  • Loic Barbot, Christophe Domergue, Jean-Francois Villard, Christophe Destouches, George Braoudakis, David Wassink, Bradley Sinclair, John C. Osborn, Huayou Wu, Christophe Blandin, Mathieu Thevenin, Gwenole Corre, and Stephane Normand, “On Line Neutron Flux Mapping in Fuel Coolant Channels of a Research Reactor,” Ieee Transactions On Nuclear Science, vol. 62, no. 2, pp. 415–419, 2015. View at Publisher · View at Google Scholar
  • Yanyan Shi, Meng Wang, Minghui Shen, and Haiming Wang, “Flow characteristics research of air-water flow with an optimized multielectrode conductance sensor,” IEEJ Transactions on Electrical and Electronic Engineering, 2015. View at Publisher · View at Google Scholar
  • Olabanji Y. Shonibare, and Kent E. Wardle, “Numerical Investigation of Vertical Plunging Jet Using a Hybrid Multifluid–VOF Multiphase CFD Solver,” International Journal of Chemical Engineering, vol. 2015, pp. 1–14, 2015. View at Publisher · View at Google Scholar
  • C. Paz, M. Conde, J. Porteiro, and M. Concheiro, “Effect of heating surface morphology on the size of bubbles during the subcooled flow boiling of water at low pressure,” International Journal of Heat and Mass Transfer, vol. 89, pp. 770–782, 2015. View at Publisher · View at Google Scholar
  • Graiciany P. Barros, Carlos E. Velasquez, Claubia Pereira, Maria Auxiliadora F. Veloso, and Antonella L. Costa, “Depletion evaluation of an ADS using reprocessed fuel,” International Journal of Hydrogen Energy, 2015. View at Publisher · View at Google Scholar
  • Xuefang Li, Ethan S. Hecht, and David M. Christopher, “Validation of a reduced-order jet model for subsonic and underexpanded hydrogen jets,” International Journal of Hydrogen Energy, 2015. View at Publisher · View at Google Scholar
  • Jianfeng Mao, and Shiyi Bao, “Comparative studies on buckling behaviors of T joint and pipe by varying geometric parameters and analysis methods,” International Journal Of Mechanical Sciences, vol. 90, pp. 113–121, 2015. View at Publisher · View at Google Scholar
  • Tim Cloppenborg, Christoph Schuster, and Antonio Hurtado, “Two-phase flow phenomena along an adiabatic riser - an experimental study at the test-facility GENEVA,” International Journal of Multiphase Flow, 2015. View at Publisher · View at Google Scholar
  • Jure Petkovsek, Yi Heng, Matevz Zupancic, Henrik Gjerkes, Franc Cimerman, and Iztok Golobic, “IR thermographic investigation of nucleate pool boiling at high heat flux,” International Journal of Refrigeration, 2015. View at Publisher · View at Google Scholar
  • Pavel Apanasevich, Dirk Lucas, Matthias Beyer, and Lutz Szalinski, “CFD based approach for modeling direct contact condensation heat transfer in two-phase turbulent stratified flows,” International Journal of Thermal Sciences, 2015. View at Publisher · View at Google Scholar