About this Journal Submit a Manuscript Table of Contents
The Scientific World Journal
Volume 2013 (2013), Article ID 547615, 10 pages
http://dx.doi.org/10.1155/2013/547615
Research Article

Effects of Using Pozzolan and Portland Cement in the Treatment of Dispersive Clay

1School of Civil Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia
2Department of Geotechnics and Transportation, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81300 Johor, Malaysia

Received 30 April 2013; Accepted 4 June 2013

Academic Editors: C. M. Petrone and G. Ventura

Copyright © 2013 A. H. Vakili et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Chandra and C. G. L. James, “Improvement of dispersive soils by using different additives,” Indian Geotechnical Journal, vol. 14, no. 3, pp. 202–216, 1984. View at Scopus
  2. V. R. Ouhadi and A. R. Goodarzi, “Assessment of the stability of a dispersive soil treated by alum,” Engineering Geology, vol. 85, no. 1-2, pp. 91–101, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Vakili, M. Selamat , H. Moayedi, and H. Amani, “Stabilization of dispersive soils by pozzolan,” in Forensic Engineering 2012: Gateway to a Safer Tomorrow, pp. 726–735, American Society of Civil Engineers, 2013.
  4. V. R. Ouhadi, H. Bayesteh, and M. Pasdarpour, “Analysis of dispersivity behavior of clay minerals by fuzzy computational system and experimental methods,” Journal of Dispersion Science and Technology, vol. 33, no. 3, pp. 420–428, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Umesh, S. Dinesh, and P. V. Sivapullaiah, “Characterization of dispersive soils,” Materials Sciences and Applications, vol. 2, no. 6, pp. 629–633, 2011.
  6. J. L. Sherard, L. P. Dunnigan, and R. S. Decker, “Some engineering problems with dispersive clays,” in Dispersive Clays, Related Piping, and Erosion in Geotechnical Projects, STP. 623, pp. 3–12, ASTM, 1977.
  7. S. Vyas, N. Phougat, P. Sharma, and M. Ratnam, “Stabilization of dispersive soil by blending polymers,” International Journal of Earth Sciences and Engineering, vol. 4, pp. 52–54, 2011.
  8. J. Fernando, “Effect of water quality on the dispersive characteristics of soils found in the morwell area, Victoria, Australia,” Geotechnical and Geological Engineering, vol. 28, no. 6, pp. 835–850, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. J. L. Sherard, R. S. Decker, N. L. Ryker, and N. L. Ryker, “Piping in earth dams of dispersive clay,” in Proceedings of the Speciality Conference on Performance of Earth and Earth-Supported Structures, vol. 1, pp. 584–626, American Society of Civil Engineers, 1972. View at Scopus
  10. O. G. Ingles, “Piping in earth dams of dispersive clay,” in Proceedings of the Speciality Conference on the Performance of Earth and Earth Supported Structure, vol. 3, pp. 111–117, American Society of Civil Engineers, 1995.
  11. C. F. Wan and R. Fell, “Investigation of rate of erosion of soils in embankment dams,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 130, no. 4, pp. 373–380, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. K. S. Richards and K. R. Reddy, “Critical appraisal of piping phenomena in earth dams,” Bulletin of Engineering Geology and the Environment, vol. 66, no. 4, pp. 381–402, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. ASTM D 4221-99, Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer, American Society for Testing and Materials, 2000.
  14. ASTM D 4647-93, Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test, American Society for Testing and Materials, 2000.
  15. ASTM D 4542-95, Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer, American Society for Testing and Materials, 2000.
  16. J. L. Sherard, R. S. Decker, and L. P. Dunnigan, “Identification and nature of dispersive soils,” Journal of the Geotechnical Engineering Division, vol. 102, no. 4, pp. 287–301, 1976. View at Scopus
  17. J. L. Sherard, E. F. Steele, R. S. Decker, and L. P. Dunnigan, “Pinhole test for identifying dispersive soils,” Journal of the Geotechnical Engineering Division, vol. 102, no. 1, pp. 69–85, 1976. View at Scopus
  18. J. K. Mitchell and K. Soga, Fundamentals of Soil Behavior, John Wiley & Sons, New York, NY, USA, 2005.
  19. R. Fell, P. Macgregor, D. Stapledon, and G. Bell, Geotechnical Engineering of Dams, A. A. Balkema, Leiden, The Netherlands, 2005.
  20. J. Sherard and R. Decker, Dispersive Clays, Related Piping and Erosion in Geotechnical Projects, ASTM STP 623, 1977.
  21. P. T. Sherwood, Soil Stabilization with Cement and Lime, State-of-the-Art Review, HMSO, London, UK, 1993.
  22. N. Ryker, “Encountering dispersive clays on soil conservation service projects in Oklahoma,” in Dispersive Clays, Related piping, and Erosion in Geotechnical Projects, STP 623, pp. 370–389, ASTM, 1977.
  23. J. Mallela, P. Harold Von Quintus, K. L. Smith, and E. Consultants, Consideration of Lime-Stabilized Layer in Mechanistic-Empirical Pavement Design, The National Lime Association, Arlington, Va, USA, 2004.
  24. ASTM D 422-63, Standard Test Method for Particle—Size Analysis of Soils, American Society for Testing and Materials, 2000.
  25. ASTM D 4318-98, Standard Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils, American Society for Testing and Materials, 2000.
  26. ASTM D 2487-98, Standard Practice for Classification of Soils for Engineering Purposes (Unified soil Classification System), American Society for Testing and Materials, 2000.
  27. ASTM D 854-98, Standard Test Method for Specific Gravity of Soils, American Society for Testing and Materials, 2000.
  28. ASTM D 698-91, Standard Test Method for Laboratory Compaction Characteristic of Soil Using Standard Effort ( 600 kN.m / m3), American Society for Testing and Materials, 2000.
  29. ASTM D 2166-98a, Standard Test Method for Unconfined Compressive Strength of Cohesive Soils, American Society for Testing and Materials, 2000.
  30. ASTM D 2967-71, Standard Test Method for PH of Peat Materials, American Society for Testing and Materials, 2000.