Research Article
The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces
Table 10
ANOVA for
/
ratios of cutting forces in raster cutter path strategy.
| Source of variance | DOF | Adj SS | Adj MS | ratio | Value |
| (m/min) | 2 | 27.182 | 13.5911 | 15.21 | 0.062 | (mm/tooth) | 2 | 27.566 | 13.7828 | 15.43 | 0.061 | (mm) | 2 | 34.451 | 17.2255 | 19.28 | 0.049 | Residual error | 2 | 1.787 | 0.8935 | | |
| Total | 8 | 90.986 | | | |
|
|