Interference Assembly and Fretting Wear Analysis of Hollow Shaft

Table 3

Sizes of three zones under different hollow degrees.

Hollow degree; 𝜂	Correction factor 𝑘	Stick zone; 𝜆1/mm	Slip zone; 𝜆2/mm	Open zone; 𝜆3/mm
0%	0.068	5.5	3.4	1.1
40%	0.080	6.2	2.3	1.5
60%	0.090	6.1	1.8	2.1
80%	0.128	5.7	0.9	3.4