Research Article
Volumetric Verification of Multiaxis Machine Tool Using Laser Tracker
Table 11
Optimization results depending on the method used.
| | | A. initial | Max. initial | A. optimization | M. optimization | Residual | | | E.M. (m) | error (m) | E.M. (m) | error (m) | error % |
| | Test 1 | 582.48 | 1654.03 | 26.02 | 87.59 | 4.47% | | Test 2 | 194.91 | 213.46 | 15.1 | 65.06 | 7.75% | | Test 3 | 555.84 | 1523.42 | 51.76 | 191.13 | 9.31% | | Test 4 | 628.69 | 1893.27 | 36.64 | 104.81 | 5.83% | | Test 5 | 555.84 | 1523.42 | 30.24 | 75.06 | 5.44% |
|
|
A.E.M. average error in module.
Max., M. maximum.
|
