Journal of Structures
Volume 2014 (2014), Article ID 795257, 7 pages
http://dx.doi.org/10.1155/2014/795257
Research Article

Reassessing the Plastic Hinge Model for Energy Dissipation of Axially Loaded Columns

Department of Civil Engineering, McMaster University, Hamilton, ON, Canada L8S 4L7

Received 30 October 2013; Accepted 30 December 2013; Published 13 February 2014

Academic Editor: Mustafa Kemal Apalak

Copyright © 2014 R. M. Korol and K. S. Sivakumaran. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [2 citations]

The following is the list of published articles that have cited the current article.

  • Onur Merter, and Taner Ucar, “An Analytical Research on Determination of Beam and Column Contribution to Plastic Energy Dissipation of RC Frames,” Arabian Journal for Science and Engineering, 2017. View at Publisher · View at Google Scholar
  • D.I. Medina, G.J. McShane, J.A. Otero, and M.R. Mackley, “The mechanical response of thermoplastic polyethylene monoliths containing longitudinal microcapillaries,” International Journal of Material Forming, 2017. View at Publisher · View at Google Scholar