Abstract

It is well known that production, distribution, marketing, inventory control, and financing all/each have a positive impact on the performance of a supply chain. Despite the growing interest in the development of integrated inventory models, the interactions between these elements of a supply chain may not be efficiently included, resulting in a restricted supply chain model presentation. To incorporate this phenomenon, a mathematical model that tackles the interdependent relationships between these aforementioned elements is developed in this paper. This study considers the determination of the optimal pricing, ordering, and delivery policies of a profit-maximizing supply chain system, faced with (1) unit wholesale price of the supplier is set based on unit production cost, (2) unit production cost is taken as a function of demand rate and production rate, (3) the supplier's production rate is adjusted according to market demand, (4) market demand depends upon buyer's selling price, (5) a free freight is offered if the buyer's order exceeds a certain minimum requirement, and (6) a constant credit period is offered by the supplier to stimulate the demand of the buyer. Algorithm for computing the optimal policies is derived. The sensitivity of the optimal results with respect to those parameters which directly influence the production and transportation costs is also examined.

1. Introduction

Following the assumption in Harris's model [1], most traditional inventory models assumed that the production rate is constant. However, with advanced manufacturing technologies, such as Computer-aided design/manufacturing , flexible manufacturing system (FMS), and computer-integrated manufacturing system (CIMS), modem manufacturing industries are highly flexible, intelligent, and integrated. As stated by Schweitzer and Seidmann [2], today it is not difficult to adjust the mechanical productivity. Over the years, a number of papers have been published dealing with economic order quantity problems under conditions of variable production rate, such as Goswami and Chaudhuri [3], Balkhi and Benkherouf [4], Goyal and Giri [5], Bhunia and Maiti [6], Kalir and Arzi [7], Rahim and Ben-Daya [8], Giri et al. [9], and Öner and Bilgiç [10]. Recently, Li et al. [11] developed an economic production quantity-(EPQ)-based model with planned backorders to evaluate the impact of the postponement strategy on a manufacturer in a supply chain.

Transportation cost is another important but often overlooked feature of real inventory systems. Transportation costs are a critical part of the total logistics costs of a commodity. Given today's intense market competition, an appropriate transportation cost function should be included into lot-sizing research and modeling with all other appropriate costs. Tersine and Toelle [12] first established an economic inventory-transport model with freight discounts. Subsequent numerous studies on transportation cost have been published, for instance, Lee [13], Hwang et al. [14], Tersine and Barman [15], Russell and Krajewski [16], Shinn et al. [17], Swenseth and Godfrey [18] and Abad and Aggarwal [19]. Recently, Rieksts and Ventura [20] consider using both truckload (TL) transportation and less than truckload (LTL) transportation to fill order for inventory models that assume a constant demand rate that must be met without shortages.

However, the above research mainly focuses on operational aspects but neglects financial concens that firms may face when deciding the supply chain method. In real business environments, many firms are capital constrained and need to finance their operations from external capital markets. Today, payment within a specified period after delivery, usually called trade credit, is a widely observed pricing strategy for improving the profitability and cost effectiveness in sales (e.g., [2123]). Suppliers offer a trade credit as an incentive to increase sales and reduce stock, and the buyer can use the sale revenue to benefit without interest charged during the credit period. Goyal [24] is the first one who developed an EOQ model under the condition of permissible delay in payments. Numerous other studies on trade credit have since been published including Aggarwal and Jaggi [25], Jamal et al. [26], Chang and Dye [27], Teng [28], Arcelus et al. [29], Biskup et al. [30], Chang et al. [31], Huang [32], Chang [33], Chung et al. [34], Ouyang et al. [35], Teng et al. [36], Chung and Liao [37], and Sarmah et al. [38].

The above articles have investigated the effect on inventory policy under trade credit from the perspective of the buyer (or supplier) only. However, decisions made by channel members are interdependent which determine the performances of other members as well as the entire channel. For example, a buyer's selling price decision will influence the customer demand and therefore the buyer's and supplier's sales volumes. As the buyer's order quantity decision based on customer demand will alter the supplier's production decision, while the supplier offers trade credit to encourage sales, the decisions on inventory and pricing of the supply chain will be altered after a while. Therefore, to improve the collaboration of supply chain partners, determining the optimal policies based on the integrated total profit function is more reasonable than using the buyer or the supplier's individual profit functions. Some scholars have noted this fact and worked on developing supply chain management decision models. Abad and Jaggi [39] developed ajoint approach to determine the optimal unit price and the length of the credit period when end demand is price sensitive under permissible delay in payments. Jaber and Osman [40] proposed a centralized model where players in a two-level supply chain coordinate their orders to minimize their local costs and that of the entire chain. Yang and Wee [41] considered an optimal replenishment policy with a credit term in a collaborative deteriorating inventory system when the demand is price sensitive and the replenishment rate is finite. Sheen and Tsao [42] explored how channel coordination can be achieved using trade credit. Chen and Kang [43] developed integrated models for determining the optimal replenishment time interval and replenishment frequency. Su et al. [44] considered a seller-buyer channel in which the end demand is credit period sensitive. Recently, Ouyang et al. [45] and Ho et al. [46] considered an optimal replenishment and order policy with a credit term when the demand is price sensitive and the production is rate sensitive demand.

In this study, to analyze pricing, ordering, delivery, and trade credit with comprehensive considerations of operation, marketing, and financing among channel members, a supplier-buyer inventory model is developed. We assume the supplier's unit selling price is based on unit production cost which is decided by the market demand and production rates. And the production rate is adjusted with a price-sensitive market demand. In such circumstances the unit wholesale price, reflecting the costs of the product, imposed by the seller on the buyer, does influence the end demand for the product. In addition, the supplier offers to pay freight charges if an order quantity meets or exceeds a certain minimum requirement. Furthermore, a fixed trade credit period is offered by the supplier. In this paper, we maximize the total profit of the whole supply chain (i.e., treating the supply chain as a single level profit centre). An algorithm is developed to determine the optimal ordering, shipping, and pricing policy. Numerical examples with relevant data are devoted to find the optimal policies of the developed model. Sensitivity analysis for main parameters is also conducted. The major difference between our model and other related models is shown in Table 1.

2. Mathematical Formulation

In this section, we consider an integrated inventory model with a retail price sensitive demand, where the supplier offers to pay freight charges if an order quantity exceeds or equal to a certain minimum requirement. In addition, a certain credit period is provided to the buyer. The relationship among members in this supply chain system is illustrated in Figure 1. To formulate the integrated inventory model, the supplier's total profit per unit time is discussed first. Then the buyer's total profit per unit time is discussed.

2.1. Supplier's Total Profit per Unit Time

During the production period, the supplier manufactures in batches of size , where is an integer, and incurs a batch setup cost . The production cycle length is . Once the first units are produced, the supplier delivers them to the buyer and then continuously making the delivery on average every units of time until the supplier's inventory level falls to zero. Therefore, the setup cost per unit time is .

The inventory holding cost contains two components: unit holding cost and opportunity cost. The unit holding cost relates to the actual ownership of the goods and includes storage and maintenance expenses, which is accounted on a per-unit-of-inventory basis. The opportunity holding cost is charged on the money value of the inventory on hand. The supplier's inventory per unit time is given by where .

Note that the similar derivation of supplier's average inventory using a manufacturing lot size of units can be found in Joglekar [48]. With production cost per unit , the holding cost rate excluding interest charges and the capital opportunity cost per dollar per unit time , the supplier's holding cost per unit time is .

Because of offering a credit period to the buyer, the supplier endures a capital opportunity cost within the time gap between delivery and payment received of the product. The supplier determines unit wholesale price = based on unit production cost $c, therefore the sales revenue per unit time is . In addition, to encourage order more, if the buyer's order quantity , the supplier is required to pay the transportation cost per unit time .

Therefore, the supplier's total profit per unit, which is the sales revenue minus set-up cost, holding cost, capital opportunity cost, and transportation cost, can be written as follows:

2.2. Buyer's Total Profit per Unit Time

For the buyer, the total sales profit per unit time is given by and the ordering cost per unit time is . With the unit purchasing cost , the holding cost rate , and the average inventory over the cycle , the buyer's holding cost (excluding interest charges) per unit time is . The transportation cost per unit time is .

As the payment is done before or after the total depletion of inventory, we have the following two possible cases: (i) , and (ii) .

Case 1 ( ). In this case, as the permissible payment time expires on or after the inventory is depleted completely, the buyer pays no opportunity cost for the purchase items. Through the credit period, buyer sells the products and uses the sales revenue to earn interest at a rate of . Thus, the interest earned per unit time is

Case 2 ( ). When buyer's permissible payment time expires on or before the inventory is depleted completely, the buyer can sell the items and earn interest with rate until the end of the credit period . Thus, the interest earned per unit time is . On the other hand, the buyer still has some inventory on hand when paying the total purchasing amount to the supplier. Hence, for the items still in stock, buyer endures a capital opportunity cost at a rate of ; the opportunity cost per unit time for the items is obtained by .
Therefore, the total profit per unit time for the buyer, which is the sales profit plus the interest earned, minus the total relevant costs, composed of ordering cost, holding cost, opportunity cost and transportation cost, can be expressed as follows: where

3. Theoretical Results

Once the supplier and buyer have established a long-term strategic partnership and are contracted to commit to the relationship, they will determine the best joint policy in which to cooperate. Under this circumstance, joint total profit per unit time for the supplier and buyer is where Note that , hence joint total profit per unit time is continuous at point for fixed and .

To find the optimal solution, say , that maximizes the above-integrated total profit, the following procedures are taken. First, for fixed and , check the effect of on the joint total profit per unit time with the fact is a concave function of . Therefore, for fixed and , the search for the optimal shipment number, , is reduced to find a local optimal solution.

Case 1 ( ). For fixed and , with is a concave function of ; hence, there exists a unique value of (denoted by ) which maximizes . By solving can be obtained and is given as To ensure , substituting (3.4) into this inequality results in where Conversely, if , we have which implies that is an increase function of . Hence, for fixed and has a maximum value at the boundary point .
From the above results, we can easyily obtain the following lemma. The proof is omitted here.

Lemma 3.1. For any given and ,(a)if , then is the optimal value which maximizes .(b)if , then is the optimal value which maximizes .

Case 2 ( ). The first order necessary condition with respect to for in (3.3) to be maximized is then we obtain the value of (denoted by ) as To ensure , substituting (3.9) into this inequality results in the following: Note that when holds, then holds, which implies that in (3.9) is well defined. Besides, we can show that Hence, in (3.9) is a unique value which maximizes .
Conversely, if , we have Thus, is a strictly decreasing function of , which implies that has a maximum value at the boundary point for fixed and .
From the above results, we can easily obtain the following lemma. The proof is omitted here.

Lemma 3.2. For any given and ,(a)if , then is the optimal value which maximizes .(b)if , then is the optimal value which maximizes .

Combining Lemmas 3.1 and 3.2, we obtain the following result.

Theorem 3.3. For any given and ,(a)if , the optimal replenishment cycle length is .(b)If , the optimal replenishment cycle length is .

Proof. It immediately follows from the facts that , Lemmas 3.1 and 3.2.
Next, let and taking the derivative of with respect to , it gets because and . Therefore is a strictly increasing function of . Furthermore, we have and . Hence, a unique value such that exists, that is, Thus, we have
Based on the above arguments and Theorem 3.3, we can easily obtain the following lemma. The proof is omitted here.

Lemma 3.4. For any given and ,(a)if , the optimal replenishment cycle length is ,(b)if , the optimal replenishment cycle length is .

From Lemma 3.4, when and are given, we can get the maximum joint total profit per unit time as follows: where

Now, to obtain the optimal retail price which maximizes for fixed , by taking the first-order partial derivative of in (3.19) and (3.20) with respect to and by setting the result to be zero, we have Eventually, we check the second-order condition , for concavity.

Therefore, we obtain the following result.

Theorem 3.5. For any given ,(a)if there exists a value which satisfies the corresponding in (3.21), and , then is the optimal solution such that has a maximum value,(b)if there exists a value which satisfies the corresponding in (3.22), , and , then is the optimal solution such that has a maximum value.

Proof. It immediately follows from Lemma 3.4.

Summarizing the above arguments, an efficient algorithm for obtaining the optimal solution is depicted.

Algorithm 3.6. Step 1. Set .Step 2. Determine from (3.16).Step 3. Find which satisfies , in (3.21) and , then determine by (3.4) and calculate by (3.19); otherwise, set .Step 4. Find which satisfies the , in (3.22) and , then determine by (3.9) and calculate by (3.20); otherwise, set .Step 5. Find .
Set , then is the optimal solution for this given .
Step 6. Set . Repeat Steps 2 to 5 to find .Step 7. If , go to Step 6. Otherwise, go to Step 8.Step 8. Set . is the optimal solution.
Once the optimal solution is obtained, the optimal order quantity follows.

4. Numerical Examples and Discussion

Example 4.1. In order to verify the proposed model, a numerical case will be used to demonstrate our model. We consider a company produces a product for an industrial client. It has experienced that the demand rate is price-relative. This item is produced with the market demand. To increase sales, a credit term “net 30” (i.e., days) is offered by the supplier, 0.04/$/year, = 0.09/$/year, and 0.10/$/year. In addition, per shipment from the company to the client is assessed a fixed cost 200/shipment and a variable cost 0.5/unit. In addition, all shipments on orders equal to or over units are shipped free of charge. Summary of other parameters used is as follows: , , , , , , , , 200/order, , and .
After running the basic set of parameters, the computational results are that the buyer charges customers a retail price $12.8258/unit, the optimal replenishment cycle length is per year and the demand rate is . The optimal lot size units per order which is over the minimum boundary of free deliveries, so the shipping cost $654 per shipment will be paid by the supplier. Under this condition, the buyer's annual total profit is $7653. Per production run, the supplier spends to produce the items at rate and sells them at a wholesale price $8.7979/unit to the buyer. As there are 16 deliveries from the supplier to the buyer per production run, the supplier's annual total profit is $7490, and the maximumjoint total annual profit .
When and are decision variables, the surface generated by the total profit function over a wide range of values of and is shown in Figure 2. The graph is drawn using MATHEMATICA 4.0. Furthermore, we show the numerical results with values of . The numerical results indicate that there is a unique integer which maximizes the value of , as shown in Figure 3. Consequently, the solution obtained through this Algorithm is the optimal solution.

Example 4.2. Using the same data as in Example 4.1, we investigate some values of to analyze the effects of credit period on performance. Consider , the optimal solutions obtained through this Algorithm are presented in Table 2. To illustrate the relationship between credit terms and profit progress, we also demonstrate profit gain (comparing with no trade credit, i.e., ) in percentage in the last three columns of Table 2. We define the profit gain with trade without trade profit without trade credit] .
Table 2 shows the optimal retail price and replenishment cycle length decreases when the credit period is increasing. However, the optimal order quantities increase first then drop. Observe from Table 2 that as the credit period increases, the profit gains in percentage are positive for the supplier and entire supply chain system, but are not always positive for the buyer. These results reveal that a larger credit period may motivate the buyer to order a smaller quantity and shorten the replenishment cycle length in order to take advantages of the trade credit more frequently. Yet, if the buyer orders less than (= 900 units), shipping costs will be charged. The result indicates that when a firm faces a trade-off between trade credit and free-freight order, receiving a trade credit is not always a good idea.

Example 4.3. Here we examine the issue of how sensitive the performances of the supply chain are to the supplier's capacity utilization parameter . Using the same data as in Example 4.1 except the value of belongs to the set . The results are reported in Table 3.
Table 3 indicates that the lower the supplier's capacity utilization, that is, the greater inefficient production in the supply chain, the higher production cost. The increasing cost in production leads to rising retail price which in turn reduces market demand and drop profits of the supply chain system. Therefore, while the value of decreases, the expected profits per unit time of the buyer and the entire supply chain decrease. On the other hand, the supplier's expected profits per unit time increase first then drop. This results from free shipping offered by the supplier with an order amount over 900 units as . The managerial implication of the result is that if the supplier can obtain the demand information of final customers through the buyer, then may employ the information to adjust production to meet this demand and optimize the entire supply chain.

Example 4.4. Following assumptions ( ) in Section 2, the supplier’s unit production cost is directly related to the production rate and inversely related to demand rate , which is given by . To understand the effect of various values of and on the channel performance, using the same parameter values as in Example 4.1, we apply the Algorithm to obtain the optimal solutions. The results are shown in Tables 4 and 5.
From Table 4, we can see that for a certain value (=1.5), increasing leads to a higher order size as well profit gains for the buyer and entire channel. However, with the increase in , the supplier’s profit increases first then drops. The results indicate that, while unit production cost is sensitive to market demand rate, the supplier will make a mass production to reduce unit production cost. A decrease retail price resulting from lower unit production cost yields an increase in market demand increase. Then the buyer’s profit gain increases with an upward market demand. On the other hand, though the supplier can reduce unit production cost by producing in large batches, however, the holding costs also increase with large production quantity. Consequently, a larger production lot size is not always more beneficial for the supplier.
Furthermore, it can be noted from Table 5 that the optimal order sizes decline with the increase in for a specific (=1.52). In addition, profits for the buyer and entire channel decrease but increase first then drop for the supplier. Since the unit production cost increases with , therefore, higher unit wholesale price and retail price are required. As expected, the increasing retail price significantly reduces market demand significantly resulting in lower total profit for the buyer. On the other hand, first the supplier’s profit goes up with the increasing wholesale price, however, as the demand level falls below its desired target this leads to a much lower annual profit for the supplier.

Example 4.5. The purpose of this example is to evaluate the relative performances for various values of the problem parameters. The study was conducted for different values of , and . With the exception of the selected parameters, the values of other parameters have been kept the same as in Example 4.1. The optimal policy maximizing the channel's profit for the various problem parameters is reported in Table 6.
From Table 6, it is observed that as the value of increases, that is, as the relative carrying cost rate (excluding interest charge) for the buyer increases, the buyer will order a smaller lot size within a shorter inventory cycle, so more replenishments for each production run (higher value of ) are required. While the value of increases (i.e., the relative unit shipping cost increases), the buyer will order a smaller lot size within a longer inventory cycle in order to save cost while selling the items to customers at a higher retail price. Also, the entire channel's expected total profit reduces as the ratio and increase. Finally, Table 6 shows with the increase in the replenishment cycle and lot size both increase first then decrease. And the number of shipments from the supplier to the buyer and channel profit decrease first then increase.

5. Conclusion

In this paper, we consider a single-supplier supply chain problem where the production rate of the supplier is assumed to be linearly related to the market demand rate, while demand is sensitive to retail price. The wholesale price imposed by the supplier on the buyer is based on unit production cost which is determined by the market demand rate and production rate. The supplier produces one product in batches and periodically delivers the product at a fixed lot size to the buyer. In addition, to encourage the retailer to order more, the supplier offers a trade credit and a quantity-dependent free freight. By analyzing the total channel profit function, we then developed a solution algorithm to determine the optimal retail price, replenishment cycle length and the number of shipments per production cycle from the supplier to the buyer. Numerical examples are presented to illustrate this model. Comprehensive sensitivity analyses for the effects of the parameters on the optimal solutions are also offered.

The following observations could be made from the numerical examples. First, when the buyer faces a trade-off between ordering a smaller quantity to take advantages of the trade credit more frequently against ordering a larger quantity to take advantages of free shipping, must carefully weigh the pros of each. Second, it is found that if the supplier can acquire “real time” market demand rate from the buyer and adjust production rate to match, this not only helps to reduce production cost for the supplier but also increases the profit gain for the entire supply chain. Finally, the result indicates that a larger production lot size is not always more economical for the supplier. It is because though the supplier can achieve economies of scale by producing in large batches, however, holding and transportation costs also increase with a large order quantity.

As for future research, our model can be extended to more general supply chain networks, for example, multiechelon or assembly supply chains. Also, it is interesting to consider deteriorating items into the proposed model.

6. Notation and Assumptions

The following notations are adopted throughout this paper: :Supplier’s production rate. :Supplier’s setup cost per setup. :Buyer’s ordering cost per order. :Supplier’s holding cost rate, excluding interest charges. :Buyer’s holding cost rate, excluding interest charges. :Supplier’s unit production cost. :Supplier’s unit wholesale price. :Buyer’s unit retail price (decision variable). :Market demand rate for the product. :Buyer’s credit period offered by the supplier per order. :Supplier’s capital opportunity cost per dollar per unit time. :Buyer’s capital opportunity cost per dollar per unit time. :Buyer’s interest earned per dollar per unit time. :Number of shipments from supplier to buyer per production run, a positive integer (decision variable). :Buyer’s replenishment cycle length (decision variable). :Buyer’s order quantity per order (decision variable). :Fixed shipping cost per delivery. :Unit shipping cost. :The supplier’s expected total profit per unit time. :The buyer’s expected total profit per unit time. : The channel’s expected total profit per unit time.

In addition, the following assumptions are made in deriving the model.(1)There is single supplier and single buyer for a single product.(2)Shortages are not permitted.(3)The market demand rate for the product is assumed sensitive to the buyer’s selling price and is given by , where is a scaling factor, and is a price-elasticity coefficient. For notational simplicity, and will be used interchangeably in this paper.(4)The supplier's capacity utilization, , is the ratio of the demand rate, , to the production rate, , which is given as less than 1, that is, and .(5)The supplier's unit production cost is directly related to the production rate and inversely related to demand rate , which is given by , where and are nonnegative real numbers and satisfy . Similar assumption has been considered in Cheng [47]. For notational simplicity, and will be used interchangeably in this paper.(6)Each unit is produced for $ and sold $ to the buyer, where , . Afterward, each unit is sold by the buyer on the market for $p .(7)The buyer's replenishment cycle length is and order quantity is per order.(8)The supplier manufactures, at rate , in batches of sizes of and incurs a batch set up cost . Each batch is dispatched to the buyer in equal size shipments.(9)Per shipment from the supplier to the buyer is assessed a fixed cost that includes insurance on consignment invoice value, trucking costs, and a variable cost for the unit shipping. In addition, free shipping is offered when the amount ordered reaches the minimum amount . That is the buyer's transportation cost per order is , where is the indicator function of with , if if .(10)During the credit period, the buyer sells the items and uses the sales revenue to earn interest at a rate of . At the end of the permissible delay period, the buyer pays the purchasing cost to the supplier and incurs an opportunity cost at a rate of for the items in stock.

Acknowledgments

The author is grateful to the anonymous referee for valuable and helpful suggestions on an earlier version of the paper. This research was supported by the National Science Council of the Republic of China under Grant NSC 97-2410-H-236-00l.