Table of Contents Author Guidelines Submit a Manuscript
Advances in Acoustics and Vibration
Volume 2009, Article ID 319538, 7 pages
http://dx.doi.org/10.1155/2009/319538
Research Article

Center Impedance Method for Damping Measurement

1Department of Mechanical Engineering, Vibration and Acoustics Center, Northern Illinois University, DeKalb, IL 60115, USA
2The Daubert Chemical Company, 4700 S. Central Avenue, Chicago, IL 60115, USA

Received 3 June 2009; Revised 5 October 2009; Accepted 18 November 2009

Academic Editor: Kim Meow Liew

Copyright © 2009 D. Malogi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. R. Kathawate and D. P. Sophiea, “Performance benefits of a new spray applied automotive damping material,” in Proceedings of the International Body Engineers Conference, Stuttgart, Germany, 1997.
  2. ASTM Designation: E 756-93, Standard Test Method for Measuring Vibration-Damping Properties of Materials, Annual Book of ASTM Standards, vol. 04.06, pp. 827–833, 1993.
  3. “Laboratory measurement of the composite vibration damping properties of materials on a supporting steel bar,” Tech. Rep. J1637, SAE, Troy, Mich, USA, 2007.
  4. L. F. Nielsen, N. J. Wismer, and S. Gade, “Improved Method for Complex Modulus Estimation,” Bruel & Kjaer Application Note, pp. 1–7, 1997.
  5. A. Gupta, S. Khandaswamy, S. Yellepeddi, T. Mulcahy, and J. Hull, “Dynamic modulus estimation and structural vibration analysis,” in Proceedings of the 17th International Modal Analysis Conference (IMAC '99), pp. 1423–1427, Kissimmee, Fla, USA, February 1999.
  6. “Test methods for vibration-damping property in laminated damping steel sheets of constrained type,” Tech. Rep. JIS G 0602, Japanese Standards Association, Tokyo, Japan, 1993.
  7. “ISO 16940:2008 Glass in building—Glazing and airborne sound insulation—Measurement of the mechanical impedance of laminated glass,” International Organization for Standardization, Geneva, Switzerland, 2008.
  8. A. Gupta, S. Gadi, G. R. Kathawate, F. Fey, and D. Larson, “Effectiveness of a sprayable damper studied using multiple test methods,” in Proceedings of the 23rd International Modal Analysis Conference, pp. 1–6, Orlando, Fla, USA, February 2005, paper no. 244.
  9. R. Pintelon, P. Guillaume, S. Vanlanduit, K. De Belder, and Y. Rolain, “Identification of Young's modulus from broadband modal analysis experiments,” Mechanical Systems and Signal Processing, vol. 18, no. 4, pp. 699–726, 2004. View at Publisher · View at Google Scholar
  10. ISO/PAS standard 16940:2004(E), Glass in building-Glazing and Airbone Sound Insulation-Measurement of Mechanical Impedance of Laminated Glass, 2004.
  11. J. M. Dowling and P. Saha, “A correlation between oberst bar and center point damping results,” in Proceedings of the SAE Noise and Vibration Conference, St. Charles, Ill, USA, May 2009, paper no. 2009-01-2134.
  12. “Vibration damping materials and underbody coatings,” Tech. Rep. J671, SAE, Troy, Mich, USA, 1997.
  13. J. Chahine and P. Saha, “Rationale for a standardized vibration damping test procedure for automotive applications,” in Proceedings of the International Congress and Exposition, February 1992, SAE paper no. 9204606.
  14. A. D. Nashif, D. I. G. Jones, and J. P. Henderson, Vibration Damping, John Wiley & Sons, New York, NY, USA, 1985.
  15. S. S. Rao, Mechanical Vibration, Prentice-Hall, Englewood Cliffs, NJ, USA, 4th edition, 2004.
  16. P. Tathavedkar, T. Onsay, and W. Liu, “Damping Performance Measurement of Non-Uniform Damping Treatments,” SAE paper no. 2007-01-2199, 2007.
  17. M. Bolduc and N. Atalla, “Measurements of SEA damping loss factor for complex structures,” Tech. Rep. 2005-01-2327, SAE, Traverse City, Mich, USA, 2005. View at Google Scholar