Table of Contents Author Guidelines Submit a Manuscript
Advances in Acoustics and Vibration
Volume 2011, Article ID 195642, 6 pages
http://dx.doi.org/10.1155/2011/195642
Research Article

Particle Swarm Optimization as an Efficient Computational Method in order to Minimize Vibrations of Multimesh Gears Transmission

Laboratoire de Tribologie et Dynamique des Systèmes, UMR CNRS 5513, Ecole Centrale de Lyon, Universitè de Lyon, 36 Avenue Guy de Collongue, 69134 Ecully Cedex, France

Received 12 January 2011; Accepted 13 April 2011

Academic Editor: Snehashish Chakraverty

Copyright © 2011 Alexandre Carbonelli et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L.S. Harris, “Dynamic loads on the teeth of spur gears,” in Proceedings of the Institution of Mechanical Engineers, vol. 172, pp. 87–112, 1958.
  2. D. B. Welbourn, “Fundamental knowledge of gear noise—a survey,” in Proceedings of the Conference on Noise and Vibrations of Engines and Transmissions, vol. C177/79, pp. 9–29, Cranfield Institute of Technology, July 1979.
  3. M. S. Tavakoli and D. R. Houser, “Optimum profile modifications for the minimization of static transmission errors of spur gears,” Journal of Mechanism, Transmissions, and Automation in Design, vol. 108, no. 1, pp. 86–95, 1986. View at Google Scholar · View at Scopus
  4. A. Kahraman and G. W. Blankenship, “Effect of involute tip relief on dynamic response of spur gear pairs,” Journal of Mechanical Design, vol. 121, no. 2, pp. 313–315, 1999. View at Google Scholar · View at Scopus
  5. K. Umezawa, H. Houjoh, S. Matsumura, and S. Wang, “Investigation of the dynamic behavior of a helical gear system dynamics of gear pairs with bias modification,” in Proceedings of the 4th World Congress and Gearing and Power Transmissions, vol. 3, pp. 1981–1990, Paris, France, 1999.
  6. M. Beghini et al., “A method to define profile modification of spur gear and minimize the transmission error,” in Proceedings of the Fall Technical Meeting of the American Gear Manufacturers Association (AGMA '04), Milwaukee, Wis, USA, October 2004.
  7. M. Umeyama, “Effects of deviation of tooth surface errors of a helical gear pair on the transmission error,” Transactions of the Japan Society of Mechanical Engineers, Part C, vol. 61, no. 587, pp. 3101–3107, 1995. View at Google Scholar · View at Scopus
  8. R. Guilbault, C. Gosselin, and L. Cloutier, “Helical gears, effects of tooth deviations and tooth modifications on load sharing and fillet stresses,” Journal of Mechanical Design, vol. 128, no. 2, pp. 444–456, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Kahraman, P. Bajpai, and N. E. Anderson, “Influence of tooth profile deviations on helical gear wear,” Journal of Mechanical Design, vol. 127, no. 4, pp. 656–663, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Bonori, M. Barbieri, and F. Pellicano, “Optimum profile modifications of spur gears by means of genetic algorithms,” Journal of Sound and Vibration, vol. 313, no. 3–5, pp. 603–616, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Kurokawa, Y. Ariura, and M. Ohtahara, “Transmission errors of cylindrical gears under load—influence of tooth profile modification and tooth deflection,” in Proceedings of the 7th International Power Transmission and Gearing Conference, DE 88, pp. 213–217, American Society of Mechanical Engineers, Design Engineering Division, San Diego, Calif, USA, October 1996.
  12. T. Erltenel and R. G. Parker, “A static and dynamic model for three-dimensional, multi-mesh gear systems,” in Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC '05), vol. 5, pp. 945–956, Long Beach, Calif, USA, September 2005.
  13. H. Vinayak, R. Singh, and C. Padmanabhan, “Linear dynamic analysis of multi-mesh transmissions containing external, rigid gears,” Journal of Sound and Vibration, vol. 185, no. 1, pp. 1–32, 1995. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Lin and R. G. Parker, “Mesh stiffness variation instabilities in two-stage gear systems,” Journal of Vibration and Acoustics, vol. 124, no. 1, pp. 68–76, 2002. View at Google Scholar · View at Scopus
  15. N. Driot, E. Rigaud, J. Sabot, and J. Perret-Liaudet, “Allocation of gear tolerances to minimize gearbox noise variability,” Acta Acustica United with Acustica, vol. 87, no. 1, pp. 67–76, 2001. View at Google Scholar · View at Scopus
  16. N. Driot and J. Perret-Liaudet, “Variability of modal behavior in terms of critical speeds of a gear pair due to manufacturing errors and shaft misalignments,” Journal of Sound and Vibration, vol. 292, no. 3–5, pp. 824–843, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. E. Rigaud and D. Barday, “Modelling and analysis of static transmission error of gears: effect of wheel body deformation and interactions between adjacent loaded teeth,” Mécanique Industrielle et Matériaux, vol. 51, no. 2, pp. 58–60, 1998. View at Google Scholar
  18. R. C. Eberhart and J. Kennedy, “A new optimizer using particle swarm theory,” in Proceedings of the 6th International Symposium on Micro Machine and Human Science, pp. 39–43, IEEE Service Center, Nagoya, Japan, October 1995.
  19. I. C. Trelea, “The particle swarm optimization algorithm: convergence analysis and parameter selection,” Information Processing Letters, vol. 85, no. 6, pp. 317–325, 2003. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  20. M. Clerc, “The swarm and the queen: towards a deterministic and adaptive particle swarm optimization,” in Proceedings of the International Conference on Evolutionary Computation (ICEC '99), pp. 1951–1957, IEEE, Washington, DC, USA, 1999.
  21. M. Clerc and J. Kennedy, “The particle swarm—explosion, stability, and convergence in a multidimensional complex space,” IEEE Transactions on Evolutionary Computation, vol. 6, no. 1, pp. 58–73, 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Sundaresan, K. Ishii, and D. R. Houser, “A robust optimization procedure with variations on design variables and constraints,” Engineering Optimization, vol. 24, no. 2, pp. 110–118, 1995. View at Google Scholar