Table of Contents Author Guidelines Submit a Manuscript
Advances in Acoustics and Vibration
Volume 2014, Article ID 592080, 10 pages
http://dx.doi.org/10.1155/2014/592080
Research Article

Monitoring Machines by Using a Hybrid Method Combining MED, EMD, and TKEO

Department of Mechanical Engineering, École de Technologie Supérieure, 1100 Notre-Dame Street West, Montreal, QC, Canada H3C 1K3

Received 17 September 2013; Revised 11 December 2013; Accepted 7 January 2014; Published 20 March 2014

Academic Editor: Joseph C. S. Lai

Copyright © 2014 Mourad Kedadouche et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. D. McFadden and J. D. Smith, “Vibration monitoring of rolling element bearings by the high-frequency resonance technique—a review,” Tribology International, vol. 17, no. 1, pp. 3–10, 1984. View at Google Scholar · View at Scopus
  2. P. W. Tse, Y. H. Peng, and R. Yam, “Wavelet analysis and envelope detection for rolling element bearing fault diagnosis—their effectiveness and flexibilities,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 123, no. 3, pp. 303–310, 2001. View at Google Scholar · View at Scopus
  3. J. Altmann and J. Mathew, “Multiple band-pass autoregressive demodulation for rolling-element bearing fault diagnosis,” Mechanical Systems and Signal Processing, vol. 15, no. 5, pp. 963–977, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Thomas, Reliability, Predictive Maintenance and Machinery Vibration, Presses de l'Université du Québec, 2011, (French).
  5. J. Antoni and R. B. Randall, “The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines,” Mechanical Systems and Signal Processing, vol. 20, no. 2, pp. 308–331, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Imaouchen, M. Thomas, and R. Alkama, “Detection of bearing defects by combining Hilbert Transform to Kurtogram,” in Proceedings of the 2nd International Conference on Maintenance, Gestion, Logistic and Electrotechnic (CIMGLE '12), pp. 1–6, Oran, Algeria, November 2012.
  7. T. Barszcz and A. Jabłoński, “A novel method for the optimal band selection for vibration signal demodulation and comparison with the Kurtogram,” Mechanical Systems and Signal Processing, vol. 25, no. 1, pp. 431–451, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Qiu, J. Lee, J. Lin, and G. Yu, “Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics,” Journal of Sound and Vibration, vol. 289, no. 4-5, pp. 1066–1090, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Qiu, J. Lee, J. Lin, and G. Yu, “Robust performance degradation assessment methods for enhanced rolling element bearing prognostics,” Advanced Engineering Informatics, vol. 17, no. 3-4, pp. 127–140, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. N. G. Nikolaou and I. A. Antoniadis, “Demodulation of vibration signals generated by defects in rolling element bearings using complex shifted Morlet wavelets,” Mechanical Systems and Signal Processing, vol. 16, no. 4, pp. 677–694, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Lin and M. J. Zuo, “Gearbox fault diagnosis using adaptive wavelet filter,” Mechanical Systems and Signal Processing, vol. 17, no. 6, pp. 1259–1269, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. J. F. Kaiser, “On a simple algorithm to calculate the 'energy' of a signal,” in Proceedings of the International Conference on Acoustics, Speech, and Signal Processing, pp. 381–384, April 1990. View at Scopus
  13. A. Potamianos and P. Maragos, “A comparison of the energy operator and the Hilbert transform approach to signal and speech demodulation,” Signal Processing, vol. 37, no. 1, pp. 95–120, 1994. View at Google Scholar · View at Scopus
  14. P. Maragos, J. F. Kaiser, and T. F. Quatieri, “On amplitude and frequency demodulation using energy operators,” IEEE Transactions on Signal Processing, vol. 41, no. 4, pp. 1532–1550, 1993. View at Publisher · View at Google Scholar · View at Scopus
  15. P. Maragos, J. F. Kaiser, and T. F. Quatieri, “Energy separation in signal modulations with application to speech analysis,” IEEE Transactions on Signal Processing, vol. 41, no. 10, pp. 3024–3051, 1993. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Junsheng, Y. Dejie, and Y. Yu, “The application of energy operator demodulation approach based on EMD in machinery fault diagnosis,” Mechanical Systems and Signal Processing, vol. 21, no. 2, pp. 668–677, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Yuping, L. Hui, and B. Lihong, “Adaptive instantaneous frequency estimation based on EMD and TKEO,” in Proceedings of the 1st International Congress on Image and Signal Processing (CISP '08), pp. 60–64, May 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Liang and I. S. Bozchalooi, “An energy operator approach to joint application of amplitude and frequency-demodulations for bearing fault detection,” Mechanical Systems and Signal Processing, vol. 24, no. 5, pp. 1473–1494, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. G. F. Bin, J. J. Gao, X. J. Li, and B. S. Dhillon, “Early fault diagnosis of rotating machinery based on wavelet packets—empirical mode decomposition feature extraction and neural network,” Mechanical Systems and Signal Processing, vol. 27, no. 1, pp. 696–711, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Kidar, M. Thomas, R. Guilbault, and M. El Badaoui, “Comparison between the sensitivity of LMD and EMD algorithms for early detection of gear defects,” Mechanics & Industry, Cambridge University Press, vol. 14, no. 2, pp. 121–127, 2013. View at Google Scholar
  21. T. Kidar, M. Thomas, M. El Badaoui, and R. Guilbault, “Application of time descriptors to the modified Hilbert transform of empirical mode decomposition for early detection of gear defects,” in Proceedings of the 2nd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO '12), pp. 471–480, Hammamet, Tunisia, March 2012.
  22. M. Kedadouche, M. Thomas, and A. Tahan, “Empirical mode decomposition of acoustic emission for early detection of bearing defects,” in Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO '13), pp. 1–11, Ferrara, Italy, 2013.
  23. Z. Feng, M. Liang, Y. Zhang, and S. Hou, “Fault diagnosis for wind turbine planetary gearboxes via demodulation analysis based on ensemble empirical mode decomposition and energy separation,” Renewable Energy, vol. 47, pp. 112–126, 2012. View at Google Scholar
  24. H. Li, L. Fu, and Z. Li, “Fault detection and diagnosis of gear wear based on Teager-Huang transform,” in Proceedings of the 1st IITA International Joint Conference on Artificial Intelligence (JCAI '09), pp. 663–666, April 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Li, Y. Zhang, and H. Zheng, “Bearing fault detection and diagnosis based on order tracking and Teager-Huang transform,” Journal of Mechanical Science and Technology, vol. 24, no. 3, pp. 811–822, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. N. Sawalhi, R. B. Randall, and H. Endo, “The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis,” Mechanical Systems and Signal Processing, vol. 21, no. 6, pp. 2616–2633, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Endo and R. B. Randall, “Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter,” Mechanical Systems and Signal Processing, vol. 21, no. 2, pp. 906–919, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. R. A. Wiggins, “Minimum entropy deconvolution,” Geoexploration, vol. 16, no. 1-2, pp. 21–35, 1978. View at Google Scholar · View at Scopus
  29. G. L. McDonald, Q. Zhao, and M. J. Zuo, “Maximum correlated Kurtosis deconvolution and application on gear tooth chip fault detection,” Mechanical Systems and Signal Processing, vol. 21, pp. 2616–2633, 2007. View at Google Scholar
  30. Y.-T. Sheen, “A complex filter for vibration signal demodulation in bearing defect diagnosis,” Journal of Sound and Vibration, vol. 276, no. 1-2, pp. 105–119, 2004. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Kedadouche, M. Thomas, and A. Tahan, “Monitoring bearings by acoustic emission: a comparative study with vibration techniques for early detection,” in Proceedings of the 30th Seminar on Machinery Vibration (CMVA '12), pp. 1–17, Niagara Falls, Canada, October 2012.
  32. M. Thomas, J. Masounave, T. M. Dao, C. T. Le Dinh, and F. Lafleur, “Rolling element bearing degradation and vibration signature relationship,” in Proceedings of the 2nd International Conference on Surveillance Methods and Acoustical and Vibratory Diagnosis, vol. 1, pp. 267–277, SFM, 1995.