Table of Contents Author Guidelines Submit a Manuscript
Advances in Acoustics and Vibration
Volume 2016, Article ID 7368787, 17 pages
http://dx.doi.org/10.1155/2016/7368787
Research Article

Kaybob Revisited: What We Have Learned about Compressor Stability from Self-Excited Whirling

1RODYN Vibration Analysis, Inc., Charlottesville, VA, USA
2Rotor Dynamics Laboratory, Mechanical and Aerospace Engineering Department, University of Virginia, Charlottesville, VA, USA
3Rotating Machinery and Controls Laboratory, Mechanical and Aerospace Engineering Department, University of Virginia, Charlottesville, VA, USA

Received 11 July 2016; Accepted 14 November 2016

Academic Editor: Lars Hakansson

Copyright © 2016 Edgar J. Gunter and Brian K. Weaver. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. J. Smith, “An operation history of fractional frequency whirl,” in Proceedings of the 4th Turbomachinery Symposium, pp. 115–125, Texas A&M University, 1975.
  2. J. W. Lund, “Spring and damping coefficients for the tilting-pad journal bearing,” ASLE Transactions, vol. 7, no. 4, pp. 342–352, 1964. View at Publisher · View at Google Scholar
  3. J. W. Lund, “Stability and damped critical speeds of a flexible rotor in fluid-film bearings,” Journal of Engineering for Industry, vol. 96, no. 2, pp. 509–517, 1974. View at Publisher · View at Google Scholar · View at Scopus
  4. J. S. Alford, “Protecting turbomachinery from self–excited rotor whirl,” Journal of Engineering for Power, vol. 87, no. 4, pp. 333–334, 1965. View at Publisher · View at Google Scholar
  5. L. E. Barrett, E. J. Gunter, and P. E. Allaire, “Optimum bearing and support damping for unbalance response and stability of rotating machinery,” Journal of Engineering for Power, vol. 100, no. 1, pp. 89–94, 1978. View at Publisher · View at Google Scholar · View at Scopus
  6. E. J. Gunter, “Dynamic stability of rotor-bearing systems,” NASA SP-113, 1966. View at Google Scholar
  7. E. J. Gunter and P. R. Trumpler, “The influence of internal friction on the stability of high speed rotors with anisotropic supports,” Journal of Engineering for Industry, vol. 91, no. 4, pp. 1105–1113, 1969. View at Publisher · View at Google Scholar
  8. E. J. Gunter, “The influence of bearing asymmetry on rotor stability,” in Proceedings of the Vibration Institute Training Conference, pp. 1–28, Williamsburg, Va, USA, June 2012.
  9. J. C. Nicholas and R. G. Kirk, “Selection and design of tilting pad and fixed lobe journal bearings for optimum turborotor dynamics,” in Proceedings of the 8th Turbomachinery Symposium, pp. 43–57, Texas A&M University, College Station, Tex, USA, 1979.
  10. J. C. Nicholas and R. G. Kirk, “Four pad tilting pad bearing design and application for multistage axial compressors,” Journal of Lubrication Technology, vol. 104, no. 4, pp. 523–529, 1982. View at Publisher · View at Google Scholar · View at Scopus
  11. B. K. Weaver, Y. Zhang, A. F. Clarens, and A. Untaroiu, “Nonlinear analysis of rub impact in a three-disk rotor and correction via bearing and lubricant adjustment,” Journal of Engineering for Gas Turbines and Power, vol. 137, no. 9, Article ID 092504, 2015. View at Publisher · View at Google Scholar · View at Scopus