Table of Contents Author Guidelines Submit a Manuscript
Advances in Acoustics and Vibration
Volume 2017 (2017), Article ID 2792376, 12 pages
https://doi.org/10.1155/2017/2792376
Research Article

Effects of the Cone and Edge on the Acoustic Characteristics of a Cone Loudspeaker

1Foster Electric Company, Limited, 1-1-109 Tsutsujigaoka, Akishima, Tokyo 196-8550, Japan
2College of Mechanical Engineering, Saitama Institute of Technology, 1690 Fusaiji, Fukaya, Saitama 369-0293, Japan
3Department of Mechanical Science and Technology, Faculty of Science and Technology, Gunma University, 1-5-1 Tenjin-cho, Kiryu, Gunma 376-8515, Japan

Correspondence should be addressed to Xilu Zhao

Received 8 February 2017; Accepted 15 March 2017; Published 21 May 2017

Academic Editor: Kim M. Liew

Copyright © 2017 Yue Hu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. N. Brown, “Theory of conical sound radiators,” Journal of the Acoustical Society of America, vol. 13, no. 1, pp. 20–22, 1941. View at Publisher · View at Google Scholar · View at Scopus
  2. P. G. Bordoni, “The conical sound source,” The Journal of the Acoustical Society of America, vol. 28, no. 2, pp. 123–126, 1945. View at Google Scholar
  3. T. Nimura, E. Matsui, K. Shibayama, and K. Kido, “Study on the cone type dynamic loudspeakers,” The Journal of the Acoustical Society of Japan, vol. 7, no. 2, pp. 16–28, 1952. View at Google Scholar
  4. Y. Kagawa, “Natural frequency and vibration modes of curved cone extensional vibration,” Tohoku University Dentsu Discourse Record, vol. 31, no. 3, 1962. View at Google Scholar
  5. F. J. Frankfort, Vibration and sound radiation of loudspeaker cones [thesis], Philips Research Reports Supplements no 2, 1975.
  6. T. Ueno, K. Takahashi, K. Ichida, and S. Ishii, “The vibration analysis of a cone loudspeaker by the finite element method,” The Journal of the Acoustical Society of Japan, vol. 34, no. 8, pp. 470–477, 1978. View at Google Scholar
  7. K. Suzuki and I. Nomoto, “Computerized analysis and observation of the vibration modes of a loudspeaker cone,” Journal of the Audio Engineering Society, vol. 30, no. 3, pp. 98–106, 1982. View at Google Scholar
  8. A. J. M. Kaizer, “Modeling of the nonlinear response of an electrodynamic loudspeaker by a volterra series expansion,” AES: Journal of the Audio Engineering Society, vol. 35, no. 6, pp. 421–433, 1987. View at Google Scholar · View at Scopus
  9. A. J. M. Kaizer, “Calculation of the sound radiation of a nonrigid loudspeaker diaphragm using the finite-element method,” Journal of the Audio Engineering Society, vol. 36, no. 7-8, pp. 539–551, 1988. View at Google Scholar
  10. E. B. Skrodzka and A. P. Sęk, “Comparison of modal parameters of loudspeakers in different working conditions,” Applied Acoustics, vol. 60, no. 3, pp. 267–277, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. R. M. Aarts, “Optimally sensitive and efficient compact loudspeakers,” Journal of the Acoustical Society of America, vol. 119, no. 2, pp. 890–896, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. N. Kyouno, T. Usagawa, T. Yamabuchi, and Y. Kagawa, “Acoustic response analysis of a cone-type loudspeaker by the finite element method,” The Journal of the Acoustical Society of Japan, vol. 61, no. 6, pp. 312–319, 2005. View at Google Scholar
  13. M. Sasajima, T. Yamaguchi, and A. Hara, “Acoustic analysis using finite element method considering effects of damping caused by air viscosity in audio equipment,” Applied Mechanics and Materials, vol. 36, pp. 282–286, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Yamamoto, LoudSpeakers System, Radio Technology, Tokyo, Japan, 1977.
  15. K. Hashimoto, M. Sakane, M. Ohnami, and T. Yoshida, “Development of vibrating reed machine for measuring Young's modulus of thin films,” Journal of the Society of Materials Science, Japan, vol. 44, no. 507, pp. 1456–1463, 1995. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Saeki, LoudSpeakers & Enclosure, SeiBunDo ShinKoSha, Tokyo, Japan, 1999.
  17. X. Zhao, “Some new problems and measure with structural optimization software development,” in Proceedings of the Conference on Computational Engineering and Science (ICCS '07), vol. 12, no. 1, pp. 129–132, Beijing, China, 2007.
  18. X. Zhao, Y. Hu, and I. Hagiwara, “Optimal design for crash characteristics of cylindrical thin-walled structure using origami engineering,” The Japan Society of Mechanical Engineers, vol. 76, no. 761, pp. 10–17, 2010. View at Google Scholar · View at Scopus