Table of Contents Author Guidelines Submit a Manuscript
Applied Bionics and Biomechanics
Volume 2017 (2017), Article ID 2471368, 9 pages
https://doi.org/10.1155/2017/2471368
Research Article

In Vivo Assessment of Elasticity of Child Rib Cortical Bone Using Quantitative Computed Tomography

1Université de Lyon, Université Claude Bernard Lyon 1, Ifsttar, LBMC UMR_T9406, 69622 Lyon, France
2School of Automotive Studies, Tongji University, Shanghai 201804, China
3Service de Radiologie, Hôpital Femme Mère Enfant, Lyon, France
4Service de Radiologie, Centre Hospitalier Lyon Sud, Pierre-Bénite, France
5Arts et Metiers ParisTech, LBM/Institut de Biomecanique Humaine Georges Charpak, 151 Bd de l’Hopital, 75013 Paris, France
6Service de Chirurgie Orthopédique et Traumatologique-Hôpital d’Instruction des Armées Desgenettes, 69003 Lyon, France

Correspondence should be addressed to F. Bermond; rf.rattsfi@dnomreb.siocnarf

Received 1 December 2016; Revised 23 February 2017; Accepted 12 March 2017; Published 9 July 2017

Academic Editor: Serkan Inceoglu

Copyright © 2017 Y. Zhu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Franklyn, S. Peiris, C. Huber, and K. H. Yang, “Pediatric material properties: a review of human child and animal surrogates,” Critical Reviews in Biomedical Engineering, vol. 35, no. 3-4, pp. 197–342, 2007. View at Google Scholar
  2. R. Kent, J. Ivarsson, and M. R. Maltese, “Experimental injury biomechanics of the pediatric thorax and abdomen,” Pediatric Injury Biomechanics, Springer, New York, 2013. View at Google Scholar
  3. A. M. Agnew, K. Moorhouse, Y.-S. Kang et al., “The response of pediatric ribs to quasi-static loading: mechanical properties and microstructure,” Annals of Biomedical Engineering, vol. 41, no. 12, pp. 2501–2514, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. J.-P. Berteau, M. Pithioux, H. Follet, C. Guivier-Curien, P. Lasaygues, and P. Chabrand, “Computed tomography, histological and ultrasonic measurements of adolescent scoliotic rib hump geometrical and material properties,” Journal of Biomechanics, vol. 45, no. 14, pp. 2467–2471, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. J. D. Currey and G. Butler, “The mechanical properties of bone tissue in children,” The Journal of Bone and Joint Surgery. American Volume, vol. 57, no. 6, pp. 810–814, 1975. View at Publisher · View at Google Scholar
  6. A. M. Agnew, Y.-S. Kang, K. Moorhouse, R. Herriott, and J. Bolte, “Age-related changes in stiffness in human ribs,” in Proceedings of IRCOBI Conference, pp. 257–269, Gothenburg, Sweden, 2013.
  7. A. M. Agnew, K. Moorhouse, M. Murach, S. E. White, and Y.-S. Kang, “Tensile stress in human ribs throughout the lifespan,” in Proceedings of IRCOBI Conference, IRC-14-44, pp. 397–407, Berlin, Germany, 2014.
  8. A. M. Agnew, M. Schafman, K. Moorhouse, S. E. White, and Y.-S. Kang, “The effect of age on the structural properties of human ribs,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 41, pp. 302–314, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. A. R. Kemper, C. McNally, E. A. Kennedy et al., “Material properties of human rib cortical bone from dynamic tension coupon testing,” Stapp car Crash Journal, vol. 49, pp. 199–230, 2005. View at Google Scholar
  10. J. M. Cormier, J. D. Stitzel, S. M. Duma, and F. Matsuoka, “Regional variation in the structural response and geometrical properties of human ribs,” Annual Proceedings of the Association for the Advancement of Automotive Medicine, vol. 49, pp. 153–170, 2005. View at Google Scholar
  11. G. Granik and I. Stein, “Human ribs: static testing as a promising medical application,” Journal of Biomechanics, vol. 6, no. 3, pp. 237–240, 1973. View at Publisher · View at Google Scholar · View at Scopus
  12. A. R. Kemper, C. McNally, C. A. Pullins, L. J. Freeman, S. M. Duma, and S. M. Rouhana, “The biomechanics of human ribs: material and structural properties from dynamic tension and bending tests,” Stapp car Crash Journal, vol. 51, pp. 235–273, 2007. View at Google Scholar
  13. D. Mitton, J.-G. Minonzio, M. Talmant et al., “Non-destructive assessment of human ribs mechanical properties using quantitative ultrasound,” Journal of Biomechanics, vol. 47, no. 6, pp. 1548–1553, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. J. D. Stitzel, J. M. Cormier, J. T. Barretta et al., “Defining regional variation in the material properties of human rib cortical bone and its effect on fracture prediction,” Stapp car Crash Journal, vol. 47, pp. 243–265, 2003. View at Google Scholar
  15. D. Subit, E. D. de Dios, J. Valazquez-Ameijide, C. Arregui-Dalmases, and J. Crandall, “Tensile material properties of human rib cortical bone under quasi-static and dynamic failure loading and influence of the bone microstucture on failure characteristics,” http://arxiv.org/abs/1108.0390. View at Publisher · View at Google Scholar · View at Scopus
  16. N. Yoganandan and F. A. Pintar, “Biomechanics of human thoracic ribs,” Journal of Biomechanical Engineering, vol. 120, pp. 100–104, 1998. View at Publisher · View at Google Scholar
  17. E. Charpail, X. Trosseille, P. Petit, S. Laporte, F. Lavaste, and G. Vallancien, “Characterization of PMHS ribs: a new test methodology,” Stapp car Crash Journal, vol. 49, pp. 183–198, 2005. View at Google Scholar
  18. Z. Li, M. W. Kindig, J. R. Kerrigan et al., “Rib fractures under anterior-posterior dynamic loads: experimental and finite-element study,” Journal of Biomechanics, vol. 43, no. 2, pp. 228–234, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. Z. Li, M. W. Kindig, D. Subit, and R. W. Kent, “Influence of mesh density, cortical thickness and material properties on human rib fracture prediction,” Medical Engineering & Physics, vol. 32, no. 9, pp. 998–1008, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. D. R. Carter and W. C. Hayes, “The compressive behavior of bone as a two-phase porous structure,” The Journal of Bone and Joint Surgery. American Volume, vol. 59, no. 7, pp. 954–962, 1977. View at Publisher · View at Google Scholar
  21. J. D. Currey, “Changes in the impact energy absorption of bone with age,” Journal of Biomechanics, vol. 12, no. 6, pp. 459–469, 1979. View at Publisher · View at Google Scholar · View at Scopus
  22. L. Duchemin, V. Bousson, C. Raossanaly et al., “Prediction of mechanical properties of cortical bone by quantitative computed tomography,” Medical Engineering & Physics, vol. 30, no. 3, pp. 321–328, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. B. Helgason, E. Perilli, E. Schileo, F. Taddei, S. Brynjólfsson, and M. Viceconti, “Mathematical relationships between bone density and mechanical properties: a literature review,” Clinical Biomechanics (Bristol, Avon), vol. 23, no. 2, pp. 135–146, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. I. Hvid, S. M. Bentzen, F. Linde, L. Mosekilde, and B. Pongsoipetch, “X-ray quantitative computed tomography: the relations to physical properties of proximal tibial trabecular bone specimens,” Journal of Biomechanics, vol. 22, no. 8-9, pp. 837–844, 1989. View at Publisher · View at Google Scholar · View at Scopus
  25. T. S. Kaneko, M. R. Pejcic, J. Tehranzadeh, and J. H. Keyak, “Relationships between material properties and CT scan data of cortical bone with and without metastatic lesions,” Medical Engineering & Physics, vol. 25, no. 6, pp. 445–454, 2003. View at Publisher · View at Google Scholar · View at Scopus
  26. J. H. Keyak, J. M. Meagher, H. B. Skinner, and C. D. Mote, “Automated three-dimensional finite element modelling of bone: a new method,” Journal of Biomedical Engineering, vol. 12, no. 5, pp. 389–397, 1990. View at Publisher · View at Google Scholar · View at Scopus
  27. C. Öhman, M. Baleani, C. Pani et al., “Compressive behaviour of child and adult cortical bone,” Bone, vol. 49, no. 4, pp. 769–776, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. B. Aubert, C. Vergari, B. Ilharreborde, A. Courvoisier, and W. Skalli, “3D reconstruction of rib cage geometry from biplanar radiographs using a statistical parametric model approach,” Computer Methods in Biomechanics and Biomedical Engineering Imaging & Visualization, vol. 4, no. 5, pp. 281–295, 2014. View at Google Scholar
  29. B. Sandoz, Z. Sidelkheir, A. Badina, F. Bermond, D. Mitton, and W. Skalli, “Variability of child rib bone Hounsfield units using in vivo computed tomography,” in Presented at the IRCOBI, pp. 270–279, Gothenburg, Sweden, 2013.
  30. J. M. Bland and D. G. Altman, “Statistical methods for assessing agreement between two methods of clinical measurement,” Lancet, vol. 1, no. 8476, pp. 307–310, 1986. View at Google Scholar
  31. Y. Zhu, Y. Fang, F. Bermond et al., “Relationship between human rib mechanical properties and cortical bone density measured by high-resolution quantitative computed tomography,” Computer Methods in Biomechanics and Biomedical Engineering, vol. 16, Supplement 1, pp. 191-192, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. R. Perz, J. Toczyski, M. W. Kindig et al., “Evaluation of the geometrical properties distribution along the human ribs using different X-ray imaging methods,” in IRCOBI Conference, pp. 245–256, Gothenburg, Sweden, 2013. View at Google Scholar
  33. R. Perz, J. Toczyski, and D. Subit, “Variation in the human ribs geometrical properties and mechanical response based on X-ray computed tomography images resolution,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 41, pp. 292–301, 2015. View at Publisher · View at Google Scholar · View at Scopus
  34. X. Shi, L. Cao, M. P. Reed, J. D. Rupp, C. N. Hoff, and J. Hu, “A statistical human rib cage geometry model accounting for variations by age, sex, stature and body mass index,” Journal of Biomechanics, vol. 47, no. 10, pp. 2277–2285, 2014. View at Publisher · View at Google Scholar · View at Scopus
  35. X. Li, M. Viceconti, M. C. Cohen, G. C. Reilly, M. J. Carré, and A. C. Offiah, “Developing CT based computational models of pediatric femurs,” Journal of Biomechanics, vol. 48, no. 10, pp. 2034–2040, 2015. View at Publisher · View at Google Scholar · View at Scopus