Table of Contents Author Guidelines Submit a Manuscript
Applied Bionics and Biomechanics
Volume 2017, Article ID 4539178, 19 pages
https://doi.org/10.1155/2017/4539178
Research Article

Macrodamage Accumulation Model for a Human Femur

1Department of Biomedical, Industrial and Human Factors Engineering, Wright State University, Dayton, OH 45435, USA
2Mechanical Engineering and Economic Sciences, Institute for Materials Science and Welding, Graz University of Technology, Kopernikusgasse 24/I, 8010 Graz, Austria
3Department of Orthopedic Surgery, Sports Medicine and Rehabilitation, Miami Valley Hospital, Dayton, OH 45409, USA

Correspondence should be addressed to Tarun Goswami; ude.thgirw@imawsog.nurat

Received 22 April 2017; Accepted 19 June 2017; Published 29 August 2017

Academic Editor: Estefanía Peña

Copyright © 2017 Farah Hamandi and Tarun Goswami. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. B. Martin, D. B. Burr, and N. A. Sharkey, Skeletal Tissue Mechanics, Springer, New York, 1998.
  2. J. Y. Rho, L. Kuhn-Spearing, and P. Zioupos, “Mechanical properties and the hierarchical structure of bone,” Medical Engineering & Physics, vol. 20, no. 2, pp. 92–102, 1998. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Keyak and S. Rossi, “Prediction of femoral fracture load using finite element models: an examination of stress- and strain-based failure theories,” Journal of Biomechanics, vol. 33, no. 2, pp. 209–214, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Garcia, P. K. Zysset, M. Charlebois, and A. Curnier, “A 1D elastic plastic damage constitutive law for bone tissue,” Archive of Applied Mechanics, vol. 80, no. 5, pp. 543–555, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Fondrk, E. Bahniuk, and D. Davy, “A damage model for nonlinear tensile behavior of cortical bone,” Journal of Biomechanical Engineering-Transactions of the Asme, vol. 121, no. 5, pp. 533–541, 1999. View at Publisher · View at Google Scholar
  6. P. Zlámal, T. Doktor, O. Jiroušek, and I. Jandejsek, “Verification of numerical model for trabecular tissue using compression test and time-lapse X-ray radiography based on material model determined from three-point bending test of single trabecula,” Key Engineering Materials, vol. 586, pp. 265–269, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. A. N. Natali, E. L. Carniel, and P. G. Pavan, “Constitutive modelling of inelastic behaviour of cortical bone,” Medical Engineering and Physics, vol. 30, pp. 905–912, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Garcia, P. Zysset, M. Charlebois, and A. Curnier, “A three-dimensional elastic plastic damage constitutive law for bone tissue,” Biomechanics and Modeling in Mechanobiology, vol. 8, no. 2, pp. 149–165, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Ridha and P. Thurner, “Finite element prediction with experimental validation of damage distribution in single trabeculae during three-point bending tests,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 27, pp. 94–106, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Charlebois, M. Jirasek, and P. Zysset, “A nonlocal constitutive model for trabecular bone softening in compression,” Biomechanics and Modeling in Mechanobiology, vol. 9, no. 5, pp. 597–611, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. R. Hambli, “Micro-CT finite element model and experimental validation of trabecular bone damage and fracture,” Bone, vol. 56, no. 2, pp. 363–374, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. H. S. Hosseini, M. Horák, P. K. Zysset, and M. Jirásek, “An over-nonlocal implicit gradient-enhanced damage-plastic model for trabecular bone under large compressive strains,” International Journal for Numerical Methods in Biomedical Engineering, vol. 31, no. 11, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. R. Hambli, “Apparent damage accumulation in cancellous bone using neural networks,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 4, no. 6, pp. 868–878, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Taylor, E. Roland, H. Ploeg et al., “Determination of orthotropic bone elastic constants using FEA and modal analysis,” Journal of Biomechanics, vol. 35, pp. 767–773, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Peng, J. Bai, X. Zeng, and Y. Zhou, “Comparison of isotropic and orthotropic material property assignments on femoral finite element models under two loading conditions,” Medical Engineering & Physics, vol. 28, no. 3, pp. 227–233, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. D. C. Wirtz, N. Schiffers, T. Pandorf, K. Radermacher, D. Weichert, and R. Forst, “Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur,” Journal of Biomechanics, vol. 33, no. 10, pp. 1325–1330, 2000. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Bergmann, HIP98, Loading of the Hip Joint. Compact Disc, Freie Universität, Berlin, 2001.
  18. T. Goswami, “Creep-fatigue life prediction—methods and trends,” High Temperature Materials and Processes, vol. 14, no. 2, pp. 21–34, 1995. View at Google Scholar
  19. T. Goswami, “Dwell sensitivity, part I behavior and modeling,” Mechanics of Materials, vol. 22, no. 2, pp. 105–130, 1996. View at Google Scholar
  20. T. Goswami, “Low cycle fatigue life prediction—a new model,” International Journal of Fatigue, vol. 19, no. 2, pp. 109–115, 1997. View at Google Scholar
  21. T. Goswami, “Dwell sensitivity modeling—a new damage model,” Material and Design, vol. 25, no. 3, pp. 191–197, 2003. View at Google Scholar
  22. M. A. Meyers and K. K. Chawla, Mechanical Behavior of Materials, Cambridge University Press, Cambridge, NY, USA, 2009.
  23. S. Manson, “Fatigue: a complex subject-some simple approximations,” Experimental Mechanics, vol. 5, no. 4, p. 193, 1965. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Fatihhi, M. Harun, M. Kadir et al., “Uniaxial and multiaxial fatigue life prediction of the trabecular bone based on physiological loading: a comparative study,” Annals of Biomedical Engineering, vol. 43, no. 10, pp. 2487–2502, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Pattin, W. Caler, and D. Carter, “Cyclic mechanical property degradation during fatigue loading of cortical bone,” Journal of Biomechanics, vol. 29, no. 1, pp. 69–79, 1996. View at Publisher · View at Google Scholar · View at Scopus
  26. P. Zioupos and A. Casinos, “Cumulative damage and the response of human bone in two-step loading fatigue,” Journal of Biomechanics, vol. 31, no. 9, pp. 825–833, 1998. View at Publisher · View at Google Scholar · View at Scopus
  27. B. Elliott and T. Goswami, “Implant material properties and their role in micromotion and failure in total hip arthroplasty,” International Journal of Mechanics and Materials in Design, vol. 8, no. 1, pp. 1–7, 2012. View at Google Scholar
  28. M. T. Makola and T. Goswami, “Hip implant stem interfacial motion, a finite element analysis,” International Journal of Experimental and Computational Biomechanics, vol. 1, no. 4, p. 343, 2011. View at Google Scholar