Research Article
An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis
Table 4
Key features of finite-element modeling of knee joint components.
| Various features of the FE model |
| Software used | SOLIDWORKS | Solver type | FFEPlus | Mesh type | Solid mesh | Mesher used | Curvature-based mesh | Jacobian points | 16 points | Element type | Triangular (2D) | Maximum element size | 6.61898 mm | Minimum element size | 1.3238 mm | Mesh quality | High | Remesh failed parts with incompatible mesh | On | Total nodes | 95294 | Total elements | 53492 | Maximum aspect ratio | 26.613 |
|
|