Table of Contents Author Guidelines Submit a Manuscript
Applied Bionics and Biomechanics
Volume 2018, Article ID 1654782, 14 pages
https://doi.org/10.1155/2018/1654782
Review Article

Geometric Modeling of Cellular Materials for Additive Manufacturing in Biomedical Field: A Review

1Department of Civil, Environmental and Architectural Engineering, Laboratory of Design Tools and Methods in Industrial Engineering, University of Padova, Via Venezia 1, 35131 Padova, Italy
2Department of Management and Engineering, Laboratory of Design Tools and Methods in Industrial Engineering, University of Padova, Stradella S. Nicola 3, 36100 Vicenza, Italy

Correspondence should be addressed to Gianpaolo Savio; ti.dpinu@oivas.oloapnaig

Received 30 June 2017; Accepted 26 October 2017; Published 1 February 2018

Academic Editor: Eujin Pei

Copyright © 2018 Gianpaolo Savio et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Gianpaolo Savio, Stefano Rosso, Roberto Meneghello, and Gianmaria Concheri, “Geometric Modeling of Cellular Materials for Additive Manufacturing in Biomedical Field: A Review,” Applied Bionics and Biomechanics, vol. 2018, Article ID 1654782, 14 pages, 2018. https://doi.org/10.1155/2018/1654782.