Table of Contents
Advances in Biomaterials
Volume 2014, Article ID 834942, 9 pages
http://dx.doi.org/10.1155/2014/834942
Research Article

Effect of Hydration on Physicochemical Properties of End-Capped PLGA

1Sunovion Pharmaceuticals Inc., Marlborough, MA 01752, USA
2Department of Drug Sciences, Section of Pharmaceutical Chemistry and Technology, University of Pavia, Viale Taramelli 12, 27100 Pavia, Italy
3University of Kentucky, College of Pharmacy, Lexington, KY 40536, USA

Received 2 May 2014; Accepted 27 June 2014; Published 13 August 2014

Academic Editor: Fraser Buchanan

Copyright © 2014 Susan D’Souza et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. N. Joshi and T. D. Wilson, “Calorimetric studies of dissolution of hydroxypropyl methylcellulose E5 (HPMC E5) in water,” Journal of Pharmaceutical Sciences, vol. 82, no. 10, pp. 1033–1038, 1993. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Siepmann and N. A. Peppas, “Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC),” Advanced Drug Delivery Reviews, vol. 48, no. 2-3, pp. 139–157, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Grund, M. Koerber, M. Walther, and R. Bodmeier, “The effect of polymer properties on direct compression and drug release from water-insoluble controlled release matrix tablets,” International Journal of Pharmaceutics, vol. 469, pp. 94–101, 2014. View at Publisher · View at Google Scholar
  4. B. Saša, P. Odon, S. Stane, and K. Julijana, “Analysis of surface properties of cellulose ethers and drug release from their matrix tablets,” European Journal of Pharmaceutical Sciences, vol. 27, no. 4, pp. 375–383, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. B. C. Hancock and G. Zografi, “The relationship between the glass transition temperature and the water content of amorphous pharmaceutical solids,” Pharmaceutical Research, vol. 11, no. 4, pp. 471–477, 1994. View at Publisher · View at Google Scholar · View at Scopus
  6. P. Blasi, S. S. D'Souza, F. Selmin, and P. P. DeLuca, “Plasticizing effect of water on poly(lactide-co-glycolide),” Journal of Controlled Release, vol. 108, no. 1, pp. 1–9, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. H. Hatakeyama and T. Hatakeyama, “Interaction between water and hydrophilic polymers,” Thermochimica Acta, vol. 308, no. 1-2, pp. 3–22, 1998. View at Publisher · View at Google Scholar · View at Scopus
  8. N. E. Hunter, C. S. Frampton, D. Q. M. Craig, and P. S. Belton, “The use of dynamic vapour sorption methods for the characterisation of water uptake in amorphous trehalose,” Carbohydrate Research, vol. 345, no. 13, pp. 1938–1944, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Kerč and S. Srčič, “Thermal analysis of glassy pharmaceuticals,” Thermochimica Acta, vol. 248, pp. 81–95, 1995. View at Google Scholar
  10. M. Gordon and J. S. Taylor, “Ideal copolymers and the second-order transitions of synthetic rubbers. i. non-crystalline copolymers,” Journal of Applied Chemistry, vol. 2, pp. 493–500, 1952. View at Google Scholar
  11. R. Surana, L. Randall, A. Pyne, N. M. Vemuri, and R. Suryanarayanan, “Determination of glass transition temperature and in Situ study of the plasticizing effect of water by inverse gas chromatography,” Pharmaceutical Research, vol. 20, no. 10, pp. 1647–1654, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. N. Passerini and D. Q. M. Craig, “An investigation into the effects of residual water on the glass transition temperature of polylactide microspheres using modulated temperature DSC,” Journal of Controlled Release, vol. 73, no. 1, pp. 111–115, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. C. B. McCrystal, J. L. Ford, and A. R. Rajabi-Siahboomi, “A study on the interaction of water and cellulose ethers using differential scanning calorimetry,” Thermochimica Acta, vol. 294, no. 1, pp. 91–98, 1997. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Kranz, N. Ubrich, P. Maincent, and R. Bodmeier, “Physicomechanical properties of biodegradable poly(D, L-lactide) and poly(D, L-lactide-co-glycolide) films in the dry and wet states,” Journal of Pharmaceutical Sciences, vol. 89, no. 12, pp. 1558–1566, 2000. View at Publisher · View at Google Scholar
  15. S. D'Souza, J. A. Faraj, S. Giovagnoli, and P. P. DeLuca, “Preparation, characterization and in vivo evaluation of Olanzapine Poly(D, L-lactide-co-glycolide) (PLGA) microspheres,” Journal of Pharmaceutics, vol. 2013, Article ID 831381, 9 pages, 2013. View at Publisher · View at Google Scholar
  16. E. Comets, F. Mentré, F. Nimmerfall et al., “Nonparametric analysis of the absorption profile of octreotide in rabbits from long-acting release formulation OncoLAR,” Journal of Controlled Release, vol. 59, no. 2, pp. 197–205, 1999. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Capan, B. H. Woo, S. Gebrekidan, S. Ahmed, and P. P. DeLuca, “Preparation and characterization of poly (D, L-Lactide-Co-Glycolide) microspheres for controlled release of Poly(L-Lysine) complexed plasmid DNA,” Pharmaceutical Research, vol. 16, pp. 509–513, 1999. View at Google Scholar
  18. E. J. Park, D. H. Na, and K. C. Lee, “In vitro release study of mono-PEGylated growth hormone-releasing peptide-6 from PLGA microspheres,” International Journal of Pharmaceutics, vol. 343, pp. 281–283, 2007. View at Google Scholar
  19. J. Xuan, Y. Lin, J. Huang et al., “Exenatide-loaded PLGA microspheres with improved glycemic control: in vitro bioactivity and in vivo pharmacokinetic profiles after subcutaneous administration to SD rats,” Peptides, vol. 46, pp. 172–179, 2013. View at Google Scholar
  20. L. Sun, S. Zhou, W. Wang, X. Li, J. Wang, and J. Weng, “Preparation and characterization of porous biodegradable microspheres used for controlled protein delivery,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 345, pp. 173–181, 2009. View at Google Scholar
  21. V. Karagkiozaki, E. Vavoulidis, P. G. Karagiannidis et al., “Development of a nanoporous and multilayer drug-delivery platform for medical implants,” International Journal of Nanomedicine, vol. 7, pp. 5327–5328, 2012. View at Google Scholar
  22. N. Zheng, M. Zhou, C. Du, S. Wang, and W. Lu, “5-fluorouracil delivery from a novel three-dimensional micro-device: in vitro and in vivo evaluation,” Archives of Pharmacal Research, vol. 36, no. 12, pp. 1487–1493, 2013. View at Publisher · View at Google Scholar
  23. S. D'Souza, J. A. Faraj, S. Giovagnoli, and P. P. DeLuca, “Development of risperidone PLGA microspheres,” Journal of Drug Delivery, vol. 2014, Article ID 620464, 11 pages, 2014. View at Publisher · View at Google Scholar
  24. S. Yandrapu and U. B. Kompella, “Development of sustained-release microspheres for the delivery of SAR 1118, an LFA-1 antagonist intended for the treatment of vascular complications of the eye,” Journal of Ocular Pharmacology and Therapeutics, vol. 29, pp. 236–248, 2013. View at Google Scholar
  25. V. Nandakumar, V. Geetha, S. Chittaranjan, and M. Doble, “High glycolic poly (DL lactic co glycolic acid) nanoparticles for controlled release of meropenem,” Biomedicine & Pharmacotherapy, vol. 67, pp. 431–436, 2013. View at Google Scholar
  26. S. D'Souza, J. A. Faraj, and P. P. DeLuca, “Microsphere delivery of Risperidone as an alternative to combination therapy,” European Journal of Pharmaceutics and Biopharmaceutics, vol. 85, pp. 631–639, 2013. View at Google Scholar
  27. R. B. Shmueli, M. Ohnaka, A. Miki et al., “Long-term suppression of ocular neovascularization by intraocular injection of biodegradable polymeric particles containing a serpin-derived peptide,” Biomaterials, vol. 34, no. 30, pp. 7544–7551, 2013. View at Publisher · View at Google Scholar
  28. H. H. Kwak, W. S. Shim, M. K. Son et al., “Efficacy of a new sustained-release microsphere formulation of exenatide, DA-3091, in Zucker diabetic fatty (ZDF) rats,” European Journal of Pharmaceutical Sciences, vol. 40, no. 2, pp. 103–109, 2010. View at Publisher · View at Google Scholar
  29. S. D'Souza, J. A. Faraj, S. Giovagnoli, and P. P. DeLuca, “IVIVC from long acting olanzapine microspheres,” International Journal of Biomaterials, vol. 2014, Article ID 407065, 11 pages, 2014. View at Publisher · View at Google Scholar
  30. J. Braunecker, M. Baba, G. E. Milroy, and R. E. Cameron, “The effects of molecular weight and porosity on the degradation and drug release from polyglycolide,” International Journal of Pharmaceutics, vol. 282, pp. 19–34, 2004. View at Google Scholar
  31. B. Li, J. Yang, L. Ma, F. Li, Z. Tu, and C. Gao, “Influence of the molecular weight of poly(lactide-co-glycolide) on the in vivo cartilage repair by a construct of poly(lactide-co-glycolide)/fibrin gel/mesenchymal stem cells/transforming growth factor-β1,” Tissue Engineering A, vol. 20, pp. 1–11, 2014. View at Google Scholar
  32. J. Schrier and P. DeLuca, “Recombinant human bone morphogenetic protein-2 binding and incorporation in PLGA microsphere delivery systems,” Pharmaceutical Development and Technology, vol. 4, pp. 611–621, 1999. View at Google Scholar
  33. J. Teng, S. Bates, D. A. Engers, K. Leach, P. Schields, and Y. Yang, “Effect of water vapor sorption on local structure of poly(vinylpyrrolidone),” Journal of Pharmaceutical Sciences, vol. 99, pp. 3815–3825, 2010. View at Google Scholar
  34. A. M. Agrawal, R. V. Manek, W. M. Kolling, and S. H. Neau, “Studies on the interaction of water with ethylcellulose: effect of polymer particle size,” AAPS PharmSciTech, vol. 4, pp. 469–479, 2003. View at Google Scholar
  35. T. Chen, A. Fowler, and M. Toner, “Literature review: supplemented phase diagram of the trehalose-water binary mixture,” Cryobiology, vol. 40, no. 3, pp. 277–282, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. M. Yasushi, L. Makoto, and K. Hiromi, “Vibrational spectroscopic study on the structure of water in polymer systems,” Journal of Molecular Liquids, vol. 80, no. 2-3, pp. 149–163, 1999. View at Google Scholar
  37. T. Hatakeyama, K. Nakamura, and H. Hatakeyama, “Vaporization of bound water associated with cellulose fibres,” Thermochimica Acta, vol. 352-353, pp. 233–239, 2000. View at Publisher · View at Google Scholar · View at Scopus
  38. M. S. Jhon and J. D. Andrade, “Water and hydrogels,” Journal of Biomedical Materials Research, vol. 7, no. 6, pp. 509–522, 1973. View at Publisher · View at Google Scholar · View at Scopus
  39. S. Li and S. McCarthy, “Further investigations on the hydrolytic degradation of poly (DL-lactide),” Biomaterials, vol. 20, no. 1, pp. 35–44, 1999. View at Publisher · View at Google Scholar · View at Scopus
  40. R. M. Ginde and R. K. Gupta, “In vitro chemical degradation of poly(glycolic acid) pellets and fibers,” Journal of Applied Polymer Science, vol. 33, no. 7, pp. 2411–2429, 1987. View at Publisher · View at Google Scholar · View at Scopus
  41. M. Vert, J. Mauduit, and S. Li, “Biodegradation of PLA/GA polymers: increasing complexity,” Biomaterials, vol. 15, no. 15, pp. 1209–1213, 1994. View at Publisher · View at Google Scholar · View at Scopus
  42. A. M. Reed and D. K. Gilding, “Biodegradable polymers for use in surgery—poly(glycolic)/poly(Iactic acid) homo and copolymers: 2. In vitro degradation,” Polymer, vol. 22, no. 4, pp. 494–498, 1981. View at Publisher · View at Google Scholar · View at Scopus
  43. K. Fu, D. W. Pack, A. M. Klibanov, and R. Langer, “Visual evidence of acidic environment within degrading poly(lactic-co- glycolic acid) (PLGA) microspheres,” Pharmaceutical Research, vol. 17, no. 1, pp. 100–106, 2000. View at Publisher · View at Google Scholar · View at Scopus