Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2010, Article ID 579631, 14 pages
http://dx.doi.org/10.1155/2010/579631
Research Article

Towards Sensor-Based Health Monitoring Systems for Bridge Decks: A Full-Depth Precast Deck Panels Case Study

1Department of Civil and Construction Engineering, Western Michigan University, Kalamazoo, MI 49008-5314, USA
2Reynolds, Smith and Hills Inc., USA
3Department of Electrical and Computer Engineering, Western Michigan University, Kalamazoo, MI 49008, USA
4School of Civil Engineering, Purdue University, West Lafayette, IN 47907-2051, USA

Received 14 June 2010; Revised 6 December 2010; Accepted 17 December 2010

Academic Editor: Farid Taheri

Copyright © 2010 Osama Y. Abudayyeh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Federal Highway Administration (FWHA), “Deficient bridges by state and highway system,” U.S. Department of Transportation, 2007, http://www.fhwa.dot.gov/bridge/defbr07.cfm.
  2. B. Phares, T. Wipf, L. Greimann, and Y. Lee, “Health monitoring of bridge structures and components using smart-structure technology,” Tech. Rep. 0092-04-14, Wisconsin Highway Research Program, WHRP 05-03, 2005. View at Google Scholar
  3. NCHRP-234, Manual for Bridge Rating through Load Testing, Research results digest, no. 234, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, DC, USA, 1998.
  4. D. A. Howell and H. W. Shenton, “System for in-service strain monitoring of ordinary bridges,” Journal of Bridge Engineering, vol. 11, no. 6, pp. 673–680, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. J. R. Casas and P. J. S. Cruz, “Fiber optic sensors for bridge monitoring,” Journal of Bridge Engineering, vol. 8, no. 6, pp. 362–373, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. J. M. Ko and Y. Q. Ni, “Technology developments in structural health monitoring of large-scale bridges,” Engineering Structures, vol. 27, no. 12, pp. 1715–1725, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Olund and P. E. DeWolf, “Passive structural health monitoring of Connecticut's bridge infrastructure,” Journal of Infrastructure Systems, vol. 13, no. 4, pp. 330–339, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. M. J. Chajes, H. W. Shenton, and D. O'Shea, “Bridge-condition assessment and load rating using nondestructive evaluation methods,” Transportation Research Record, vol. 2, no. 1696, pp. 83–91, 2000. View at Google Scholar · View at Scopus
  9. M. Cheung, W. Li, and B. Noruziaan, “Data acquisition, processing and management systems for a Canadian bridge monitoring project,” in International Conference on Computing in Civil and Building Engineering, Bauhaus-Universitat, Weimar, Germany, June 2004, http://e-pub.uni-weimar.de/volltexte/2004/128/pdf/icccbe-x_012.pdf.
  10. I. N. Robertson, “Prediction of vertical deflections for a long-span prestressed concrete bridge structure,” Engineering Structures, vol. 27, no. 12, pp. 1820–1827, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. Yang and J. J. Myers, “Live-load test results of Missouri's first high-performance concrete superstructure bridge,” Transportation Research Record, no. 1845, pp. 96–103, 2003. View at Google Scholar · View at Scopus