Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2010, Article ID 724962, 13 pages
http://dx.doi.org/10.1155/2010/724962
Review Article

Smart Sensing Technologies for Structural Health Monitoring of Civil Engineering Structures

1Department of Engineering Structures and Mechanics, School of Science, Wuhan University of Technology, Wuhan 430070, China
2Department of Mechanical Engineering, Sheffield University, Sheffield S1 3JD, UK

Received 31 August 2009; Revised 7 December 2009; Accepted 3 May 2010

Academic Editor: Jinying Zhu

Copyright © 2010 M. Sun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. P. Chong, “Health monitoring of civil structures,” Journal of Intelligent Material Systems and Structures, vol. 9, no. 11, pp. 892–898, 1999. View at Google Scholar · View at Scopus
  2. F. K. Chang, “Structural health monitoring: a summary report on the first international workshop on structural health monitoring,” in Proceedings of the 2rd International Workshop on Structural Health Monitoring, F. K. Chang, Ed., pp. 3–11, Technomic Publishing Company, Lancaster, UK, September 1997.
  3. B. Culshaw and J. Dakin, Eds., Optical Fiber Sensors. Applications, Analysis, and Future Trends, vol. 4, Artech House, London, UK, 1996.
  4. C. I. Merzbacher, A. D. Kersey, and E. J. Friebele, “Fiber optic sensors in concrete structures: a review,” Smart Materials and Structures, vol. 5, no. 2, pp. 196–208, 1996. View at Google Scholar · View at Scopus
  5. F. Ansari, “State-of-the-art in the applications of fiber-optic sensors to cementitious composites,” Cement and Concrete Composites, vol. 19, no. 1, pp. 3–19, 1997. View at Google Scholar · View at Scopus
  6. C. K. Y. Leung, “Fiber optic sensors in concrete: the future?” NDT and E International, vol. 34, no. 2, pp. 85–94, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. M. De Vries, M. Nasta, V. Bhatia et al., “Performance of embedded short-gage-length optical fiber sensors in a fatigue-loaded reinforced concrete specimen,” Smart Materials and Structures, vol. 4, no. 1A, pp. 107–113, 1995. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Quirion and G. Ballivy, “Concrete strain monitoring with Fabry-Pérot fiber-optic sensor,” Journal of Materials in Civil Engineering, vol. 12, no. 3, pp. 254–261, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Quirion and G. Ballivy, “Laboratory investigation on Fabry-Pérot sensor and conventional extensometers for strain measurement in high performance concrete,” Canadian Journal of Civil Engineering, vol. 27, no. 5, pp. 1088–1093, 2000. View at Google Scholar · View at Scopus
  10. B. Zhang, B. Benmokrane, J.-F. Nicole, and R. Masmoudi, “Evaluation of fibre optic sensors for structural condition monitoring,” Materials and Structures, vol. 35, no. 250, pp. 357–364, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Delepine-Lesoille, E. Merliot, C. Boulay, L. Quétel, M. Delaveau, and A. Courteville, “Quasi-distributed optical fibre extensometers for continuous embedding into concrete: design and realization,” Smart Materials and Structures, vol. 15, no. 4, pp. 931–938, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. X. Zeng, X. Bao, C. Y. Chhoa et al., “Strain measurement in a concrete beam by use of the Brillouin-scattering-based distributed fiber sensor with single-mode fibers embedded in glass fiber reinforced polymer rods and bonded to steel reinforcing bars,” Applied Optics, vol. 41, no. 24, pp. 5105–5114, 2002. View at Google Scholar · View at Scopus
  13. G. Chen, B. Xu, R. D. McDaniel, X. Ying, D. J. Pommerenke, and Z. Wu, “Distributed strain measurement of a large-scale reinforced concrete beam-column assembly under cyclic loading,” in Smart Structures and Materials: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 5765, article 55 of Proceedings of SPIE, pp. 516–527, San Diego, Calif, USA, March 2005. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Wu, B. Xu, K. Hayashi, and A. Machida, “Distributed optic fiber sensing for a full-scale PC girder strengthened with prestressed PBO sheets,” Engineering Structures, vol. 28, no. 7, pp. 1049–1059, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. R. M. Measures, A. T. Alavie, R. Maaskant, M. Ohn, S. Karr, and S. Huang, “A structurally integrated Bragg grating laser sensing system for a carbon fiber prestressed concrete highway bridge,” Smart Materials and Structures, vol. 4, no. 1, pp. 20–30, 1995. View at Publisher · View at Google Scholar · View at Scopus
  16. R. C. Tennyson, A. A. Mufti, S. Rizkalla, G. Tadros, and B. Benmokrane, “Structural health monitoring of innovative bridges in Canada with fiber optic sensors,” Smart Materials and Structures, vol. 10, no. 3, pp. 560–573, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. B. Benmokrane, H. Rahman, P. Mukhopadhyaya et al., “Use of fibre reinforced polymer reinforcement integrated with fibre optic sensors for concrete bridge deck slab construction,” Canadian Journal of Civil Engineering, vol. 27, no. 5, pp. 928–940, 2000. View at Google Scholar · View at Scopus
  18. A. A. Mufti, G. Tadros, and P. R. Jones, “Field assessment of fibre-optic Bragg grating strain sensors in the confederation bridge,” Canadian Journal of Civil Engineering, vol. 24, no. 6, pp. 963–966, 1997. View at Google Scholar · View at Scopus
  19. R. Brönnimann, PH. M. Nellen, and U. Sennhauser, “Reliability monitoring of CFRP structural elements in bridges with fiber optic Bragg grating sensors,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 322–329, 2000. View at Publisher · View at Google Scholar · View at Scopus
  20. D. Inaudi and S. Vurpillot, “Monitoring of concrete bridges with long-gage fiber optic sensors,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 280–292, 2000. View at Publisher · View at Google Scholar · View at Scopus
  21. D. Inaudi, A. Rufenacht, B. Von Arx, H. P. Noher, S. Vurpillot, and B. Glisic, “Monitoring of a concrete arch bridge during construction,” in Smart Structures and Materials: Smart Systems for Bridges, Structures, and Highways, vol. 4696 of Proceedings of SPIE, pp. 146–153, San Diego, Calif, USA, March 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. P. L. Fuhr, D. R. Huston, M. Nelson et al., “Fiber optic sensing of a bridge in Waterbury, Vermont,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 293–303, 2000. View at Publisher · View at Google Scholar · View at Scopus
  23. P. L. Fuhr and D. R. Huston, “Multiplexed fiber optic pressure and vibration sensors for hydroelectric dam monitoring,” Smart Materials and Structures, vol. 2, no. 4, pp. 260–263, 1993. View at Publisher · View at Google Scholar · View at Scopus
  24. D. R. Huston, P. L. Fuhr, T. P. Ambrose, and D. A. Barker, “Intelligent civil structures—activities in Vermont,” Smart Materials and Structures, vol. 3, no. 2, pp. 129–139, 1994. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Ou and Z. Zhou, “Applications of optical fiber sensors of SHM in infrastructures,” in Smart Sensor Phenomena, Technology, Networks, and Systems, vol. 6933 of Proceedings of SPIE, p. 10, San Diego, Calif, USA, March 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. C. Lan, Z. Zhou, S. Sun, and J. Ou, “FBG based intelligent monitoring system of the Tianjin Yonghe Bridge,” in Smart Sensor Phenomena, Technology, Networks, and Systems 2008, vol. 6933, article 693312 of Proceedings of SPIE, p. 9, San Diego, Calif, USA, March 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Liu and D. Jiang, “The application of structural health monitoring system technology FBG-based to no.2 Wuhan bridge over Yangtze river,” in Photonics and Optoelectronics Meetings: Fiber Optic Communication and Sensors (POEM '08), vol. 7278 of Proceedings of SPIE, Wuhan, China, November 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. W. R. Habel, I. Feddersen, and C. Fitschen, “Embedded quasi-distributed fiber-optic sensors for the long-term monitoring of the grouting area of rock anchors in a large gravity dam,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 330–339, 2000. View at Publisher · View at Google Scholar · View at Scopus
  29. J. P. Newhook, B. Bakht, A. Mufti, and G. Tadros, “Monitoring of Hall's harbour wharf,” in Health Monitoring and Management of Civil Infrastructure Systems, vol. 4337 of Proceedings of SPIE, pp. 234–244, March 2001. View at Publisher · View at Google Scholar · View at Scopus
  30. P. L. Fuhr, D. R. Huston, P. J. Kajenski, and T. P. Ambrose, “Performance and health monitoring of the Stafford Medical Building using embedded sensors,” Smart Materials and Structures, vol. 1, no. 1, pp. 63–68, 1992. View at Publisher · View at Google Scholar · View at Scopus
  31. I. B. Kwon, C. Y. Kim, and M. Y. Choi, “Continuous measurement of temperature distributed on a building construction,” in Smart Structures and Materials: Smart Systems for Bridges, Structures, and Highways, vol. 4696 of Proceedings of SPIE, pp. 273–283, March 2002. View at Publisher · View at Google Scholar · View at Scopus
  32. P. Rossi and F. Le Maou, “New method for detecting cracks in concrete using fibre optics,” Materials and Structures, vol. 22, no. 6, pp. 437–442, 1989. View at Publisher · View at Google Scholar · View at Scopus
  33. C. K. Y. Leung, N. Elvin, N. Olson, T. F. Morse, and Y.-F. He, “A novel distributed optical crack sensor for concrete structures,” Engineering Fracture Mechanics, vol. 65, no. 2-3, pp. 133–148, 2000. View at Google Scholar · View at Scopus
  34. K. T. Wan and C. K. Y. Leung, “Applications of a distributed fiber optic crack sensor for concrete structures,” Sensors and Actuators A, vol. 135, no. 2, pp. 458–464, 2007. View at Publisher · View at Google Scholar · View at Scopus
  35. N. Elvin, C. K. Y. Leung, V. S. Sudarshanam, and S. Ezekiel, “Novel fiber optic delamination detection scheme: theoretical and experimental feasibility studies,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 314–321, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. X. Gu, Z. Chen, and F. Ansari, “Method and theory for a multi-gauge distributed fiber optic crack sensor,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 266–273, 2000. View at Publisher · View at Google Scholar · View at Scopus
  37. X. Chen and F. Ansari, “Fiber optic stress wave sensor for detection of internal flaws in concrete structures,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 274–279, 2000. View at Publisher · View at Google Scholar · View at Scopus
  38. Z. Chen and A. Farhad, “Embedded fiber optic sensors for detection of acoustic emissions in structures,” Acta Optica Sinica, vol. 20, no. 8, pp. 1060–1064, 2000. View at Google Scholar · View at Scopus
  39. D. C. Betz, G. Thursby, B. Culshaw, and W. J. Staszewski, “Acousto-ultrasonic sensing using fiber Bragg gratings,” Smart Materials and Structures, vol. 12, no. 1, pp. 122–128, 2003. View at Publisher · View at Google Scholar · View at Scopus
  40. N. R. Swamy and R. M. Wan, “Use of dynamic nondestructive test methods to monitor concrete deterioration due to alkali-silica reaction,” Cement, Concrete and Aggregates, vol. 15, no. 1, pp. 32–49, 1993. View at Google Scholar · View at Scopus
  41. M. Sansalone, J.-M. Lin, and W. B. Streett, “Determining the depth of surface-opening cracks using impact-generated stress waves and time-of-flight techniques,” ACI Materials Journal, vol. 95, no. 2, pp. 168–177, 1998. View at Google Scholar · View at Scopus
  42. Y.-C. Jung, T. Kundu, and M. R. Ehsani, “A new nondestructive inspection technique for reinforced concrete beams,” ACI Materials Journal, vol. 99, no. 3, pp. 292–299, 2002. View at Google Scholar · View at Scopus
  43. P. L. Fuhr and D. R. Huston, “Corrosion detection in reinforced concrete roadways and bridges via embedded fiber optic sensors,” Smart Materials and Structures, vol. 7, no. 2, pp. 217–228, 1998. View at Google Scholar · View at Scopus
  44. R. C. Tennyson, T. Coroy, G. Duck et al., “Fibre optic sensors in civil engineering structures,” Canadian Journal of Civil Engineering, vol. 27, no. 5, pp. 880–889, 2000. View at Google Scholar · View at Scopus
  45. Y. Wang, D.-K. Liang, and B. Zhou, “Measurement of steel corrosion in concrete structures by analyzing long-period fiber grating spectrum character,” Spectroscopy and Spectral Analysis, vol. 28, no. 11, pp. 2660–2664, 2008 (Chinese). View at Publisher · View at Google Scholar · View at Scopus
  46. P. Cosentino, B. Grossman, C. Shieh, S. Doi, H. Xi, and P. Erbland, “Fiber-optic chloride sensor development,” Journal of Geotechnical Engineering, vol. 121, no. 8, pp. 610–617, 1995. View at Google Scholar · View at Scopus
  47. W. C. Michie, B. Culshaw, M. Konstantaki et al., “Distributed pH and water detection using fiber-optic sensors and hydrogels,” Journal of Lightwave Technology, vol. 13, no. 7, pp. 1415–1420, 1995. View at Publisher · View at Google Scholar · View at Scopus
  48. W. Grahn, P. Makedonski, J. Wichern, W. Kowalsky, and S. Wiese, “Fiberoptical sensors for in-situ monitoring of moisture and pH-value in reinforced concrete,” in Imaging Spectrometry VII, vol. 4480 of Proceedings of SPIE, pp. 395–403, August 2001. View at Publisher · View at Google Scholar · View at Scopus
  49. C. Liang, F. P. Sun, and C. A. Rogers, “Coupled electro-mechanical analysis of adaptive material systems—determination of the actuator power consumption and system energy transfer,” Journal of Intelligent Material Systems and Structures, vol. 5, no. 1, pp. 12–20, 1994. View at Google Scholar · View at Scopus
  50. J. W. Ayres, F. Lalande, Z. Chaudhry, and C. A. Rogers, “Qualitative impedance-based health monitoring of civil infrastructures,” Smart Materials and Structures, vol. 7, no. 5, pp. 599–605, 1998. View at Google Scholar · View at Scopus
  51. S. Park, C.-B. Yun, Y. Roh, and J.-J. Lee, “PZT-based active damage detection techniques for steel bridge components,” Smart Materials and Structures, vol. 15, no. 4, pp. 957–966, 2006. View at Publisher · View at Google Scholar · View at Scopus
  52. G. Park, H. H. Cudney, and D. J. Inman, “Impedance-based health monitoring of civil structural components,” Journal of Infrastructure Systems, vol. 6, no. 4, pp. 153–160, 2000. View at Publisher · View at Google Scholar · View at Scopus
  53. G. Park, K. Kabeya, H. H. Cudney, and D. J. Inman, “Impedance-based structural health monitoring for temperature varying applications,” JSME International Journal, Series A, vol. 42, no. 2, pp. 249–258, 1999. View at Google Scholar · View at Scopus
  54. Y. Yang, Y. Y. Lim, and C. K. Soh, “Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures. I. Experiment,” Smart Materials and Structures, vol. 17, no. 3, Article ID 035008, p. 14, 2008. View at Publisher · View at Google Scholar · View at Scopus
  55. Y. Yang, Y. Y. Lim, and C. K. Soh, “Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures. II. Numerical verification,” Smart Materials and Structures, vol. 17, no. 3, Article ID 035008, p. 12, 2008. View at Publisher · View at Google Scholar · View at Scopus
  56. C. K. Soh, K. K.-H. Tseng, S. Bhalla, and A. Gupta, “Performance of smart piezoceramic patches in health monitoring of a RC bridge,” Smart Materials and Structures, vol. 9, no. 4, pp. 533–542, 2000. View at Publisher · View at Google Scholar · View at Scopus
  57. K. K. Tseng and L. Wang, “Smart piezoelectric transducers for in situ health monitoring of concrete,” Smart Materials and Structures, vol. 13, no. 5, pp. 1017–1024, 2004. View at Publisher · View at Google Scholar · View at Scopus
  58. Y. Y. Lim, S. Bhalla, and C. K. Soh, “Structural identification and damage diagnosis using self-sensing piezo-impedance transducers,” Smart Materials and Structures, vol. 15, no. 4, pp. 987–995, 2006. View at Publisher · View at Google Scholar · View at Scopus
  59. Y. Wen, Y. Chen, P. Li, D. Jiang, and H. Guo, “Smart concrete with embedded piezoelectric devices: implementation and characterization,” Journal of Intelligent Material Systems and Structures, vol. 18, no. 3, pp. 265–274, 2007. View at Publisher · View at Google Scholar · View at Scopus
  60. C. S. Wang, F. Wu, and F.-K. Chang, “Structural health monitoring from fiber-reinforced composites to steel-reinforced concrete,” Smart Materials and Structures, vol. 10, no. 3, pp. 548–552, 2001. View at Publisher · View at Google Scholar · View at Scopus
  61. F. Wu and F.-K. Chang, “A built-in active sensing diagnostic system for civil infrastructure systems,” in Smart Systems for Bridges, Structures, and Highways-Smart Structures and Materials, vol. 4330 of Proceedings of SPIE, pp. 27–35, March 2001. View at Publisher · View at Google Scholar · View at Scopus
  62. F. Wu and F. K. Chang, “Diagnosis of debonding in steel-reinforced concrete with embedded piezoelectric elements,” in Proceedings of the 3rd International Workshop on Structural Health Monitoring: The Demands and Challenges, F. K. Chang, Ed., pp. 670–679, CRC Press, New York, NY, USA, 2001.
  63. G. Kawiecki, “Feasibility of applying distributed piezotransducers to structural damage detection,” Journal of Intelligent Material Systems and Structures, vol. 9, no. 3, pp. 189–197, 1998. View at Google Scholar · View at Scopus
  64. M. Saafi and T. Sayyah, “Health monitoring of concrete structures strengthened with advanced composite materials using piezoelectric transducers,” Composites Part B, vol. 32, no. 4, pp. 333–342, 2001. View at Publisher · View at Google Scholar · View at Scopus
  65. M. Q. Sun, W. J. Staszewski, R. N. Swamy, and Z. Q. Li, “Application of low-profile piezoceramic transducers for health monitoring of concrete structures,” NDT and E International, vol. 41, no. 8, pp. 589–595, 2008. View at Publisher · View at Google Scholar · View at Scopus
  66. G. B. Song, H. C. Gu, and Y.-L. Mo, “Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a review,” Smart Materials and Structures, vol. 17, no. 3, Article ID 033001, 2008. View at Publisher · View at Google Scholar · View at Scopus
  67. Z. Li, D. Zhang, and K. Wu, “Cement-based 0–3 piezoelectric composites,” Journal of the American Ceramic Society, vol. 85, no. 2, pp. 305–313, 2002. View at Google Scholar · View at Scopus
  68. Y. Y. Lu and Z. J. Li, “Cement-based piezoelectric sensor for acoustic emission detection in concrete structures,” in Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, vol. 323, March 2008. View at Scopus
  69. X. Y. Zhao, H. N. Li, D. Du, and J. L. Wang, “Concrete structure monitoring based on built-in piezoelectric ceramic transducers,” in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 6932 of Proceedings of SPIE, p. 8, March 2008. View at Publisher · View at Google Scholar · View at Scopus
  70. P.-W. Chen and D. D. L. Chung, “Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection,” Smart Materials and Structures, vol. 2, no. 1, pp. 22–30, 1993. View at Publisher · View at Google Scholar · View at Scopus
  71. P. Chen and D. D. L. Chung, “Carbon-fiber-reinforced concrete as an intrinsically smart concrete for damage assessment during dynamic loading,” Journal of the American Ceramic Society, vol. 78, no. 3, pp. 816–818, 1995. View at Google Scholar · View at Scopus
  72. D. D. L. Chung, “Self-monitoring structural materials,” Materials Science and Engineering, vol. 22, no. 2, pp. 57–78, 1998. View at Google Scholar · View at Scopus
  73. Q. Mao, B. Zhao, D. Sheng, and Z. Li, “Resistance changement of compression sensible cement speciment under different stresses,” Journal Wuhan University of Technology, vol. 11, no. 3, pp. 41–45, 1996. View at Google Scholar · View at Scopus
  74. M. Sun, Z. Li, Q. Mao, and D. Shen, “A study on thermal self-monitoring of carbon fiber reinforced concrete,” Cement and Concrete Research, vol. 9, no. 5, pp. 769–771, 1999. View at Google Scholar · View at Scopus
  75. S. Wen and D. D. L. Chung, “Carbon fiber-reinforced cement as a strain-sensing coating,” Cement and Concrete Research, vol. 31, no. 4, pp. 665–667, 2001. View at Publisher · View at Google Scholar · View at Scopus
  76. W. Wang, H. Dai, and S. Wu, “Mechanical behavior and electrical property of CFRC-strengthened RC beams under fatigue and monotonic loading,” Materials Science and Engineering A, vol. 479, no. 1-2, pp. 191–196, 2008. View at Publisher · View at Google Scholar · View at Scopus
  77. X. Wang and D. D. L. Chung, “Short carbon fiber reinforced epoxy coating as a piezoresistive strain sensor for cement mortar,” Sensors and Actuators, A, vol. 71, no. 3, pp. 208–212, 1998. View at Google Scholar · View at Scopus
  78. N. Muto, H. Yangagida, T. Nakatsuji et al., “Self-diagnosing performance for fracture in CFGRP-reinforced concrete,” Journal of the Ceramic Society of Japan, vol. 101, no. 1176, pp. 860–866, 1993. View at Google Scholar · View at Scopus
  79. M. Sugita, H. Yanagida, and N. Muto, “Materials design for self-diagnosis of fracture in CFGFRP composite reinforcement,” Smart Materials and Structures, vol. 4, no. 1A, pp. 52–57, 1995. View at Publisher · View at Google Scholar · View at Scopus
  80. N. Muto, Y. Arai, S. G. Shin et al., “Hybrid composites with self-diagnosing function for preventing fatal fracture,” Composites Science and Technology, vol. 61, no. 6, pp. 875–883, 2001. View at Publisher · View at Google Scholar · View at Scopus
  81. C. Q. Yang and Z. S. Wu, “Self-structural health monitoring function of RC structures with HCFRP sensors,” Journal of Intelligent Material Systems and Structures, vol. 17, no. 10, pp. 895–906, 2006. View at Publisher · View at Google Scholar · View at Scopus
  82. C. Yang, Z. Wu, and Y. Zhang, “Structural health monitoring of an existing PC box girder bridge with distributed HCFRP sensors in a destructive test,” Smart Materials and Structures, vol. 17, no. 3, Article ID 035032, p. 10, 2008. View at Publisher · View at Google Scholar · View at Scopus
  83. H. Kwun and K. A. Bartels, “Magnetostrictive sensor technology and its applications,” Ultrasonics, vol. 36, no. 1–5, pp. 171–178, 1998. View at Google Scholar · View at Scopus
  84. D. A. Khazem, H. Kwun, S. Y. Kim, and C. Dynes, “Long-range inspection of suspender ropes in suspension bridges using the magnetostrictive sensor technology,” in Proceedings of the 3rd International Workshop on Structural Health Monitoring: The Demands and Challenges, F.-K. Chung, Ed., pp. 384–392, CRC Press, New York, NY, USA, 2001.
  85. W.-B. Na and T. Kundu, “EMAT-based inspection of concrete-filled steel pipes for internal voids and inclusions,” Journal of Pressure Vessel Technology, vol. 124, no. 3, pp. 265–272, 2002. View at Publisher · View at Google Scholar · View at Scopus
  86. W.-B. Na and T. Kundu, “A combination of PZT and EMAT transducers for interface inspection,” Journal of the Acoustical Society of America, vol. 111, no. 5 I, pp. 2128–2139, 2002. View at Publisher · View at Google Scholar · View at Scopus
  87. P. Bouchilloux, N. Lhermet, and F. Claeyssen, “Electromagnetic stress sensor for bridge cables and prestressed concrete structures,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 5, pp. 397–401, 2000. View at Publisher · View at Google Scholar · View at Scopus
  88. P. Rizzo and F. L. Di Scalea, “Wavelet-based feature extraction for automatic defect classification in strands by ultrasonic structural monitoring,” Smart Structures and Systems, vol. 2, no. 3, pp. 253–274, 2006. View at Google Scholar · View at Scopus