Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2013, Article ID 275657, 13 pages
http://dx.doi.org/10.1155/2013/275657
Research Article

An Analytical Step-by-Step Procedure to Derive the Flexural Response of RC Sections in Compression

1Dipartimento di Ingegneria Civile, Università di Messina, Contrada Di Dio, 98166 Messina, Italy
2Facoltà di Ingegneria, Architettura e Scienze Motorie, Università Kore di Enna, Cittadella Universitaria, 94100 Enna, Italy
3Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali, Università di Palermo, Viale delle Scienze, 90128 Palermo, Italy

Received 6 March 2013; Revised 5 August 2013; Accepted 8 August 2013

Academic Editor: Andreas Kappos

Copyright © 2013 Piero Colajanni et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Fafitis, “Interaction surfaces of reinforced-concrete sections in biaxial bending,” Journal of Structural Engineering, vol. 127, no. 7, pp. 840–846, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. J. L. Bonet, P. F. Miguel, M. A. Fernandez, and M. L. Romero, “Analytical approach to failure surfaces in reinforced concrete sections subjected to axial loads and biaxial bending,” Journal of Structural Engineering, vol. 130, no. 12, pp. 2006–2015, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. G. Monti and S. Alessandri, “Assessment of rc columns under combined biaxial bending and axial load,” in Proceedings of the 2nd FIB Congress, Naples, Italy, 2006.
  4. R. W. Clough and S. B. Johnston, “Effect of stiffness degradation on earthquake ductility requirements,” in Proceedings of 2nd Japan Earthquake Engineering Symposium, Tokyo, Japan, 1966.
  5. T. Takeda, M. A. Sozen, and N. N. Nielsen, “Reinforced concrete response to simulated earthquake,” Journal of Structural Division, vol. 96, no. 12, pp. 2257–2273, 1970. View at Google Scholar
  6. M. S. L. Roufaiel and C. Meyer, “Analytical modeling of hysteretic behavior of reinforced concrete frame,” Journal of Structural Engineering, vol. 113, no. 3, pp. 429–444, 1987. View at Google Scholar · View at Scopus
  7. A. R. Mari and A. C. Scordelis, “Nonlinear geometric, material and time dependent analysis of three dimensional reinforced and prestressed concrete frames,” USB/SESM Report 84/12, Department of Civil Engineering, University of California, Berkeley, Calif, USA, 1973. View at Google Scholar
  8. T. Taucer, E. Spacone, and F. C. Filippou, “A fiber beam-column element for seismic response analysis of reinforced concrete structures,” Report EERC 91-17, Earthquake Engineering Research Center, Berkeley, Calif, USA, 1991. View at Google Scholar
  9. Z. Zhu, I. Ahmad, and A. Mirmiran, “Fiber element modeling for seismic performance of bridge columns made of concrete-filled FRP tubes,” Engineering Structures, vol. 28, no. 14, pp. 2023–2035, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. E. O. Pfrang, C. P. Siess, and M. A. Sozen, “Load-moment-curvature characteristics of RC cross-sections,” ACI Journal, vol. 61, no. 7, pp. 763–778, 1964. View at Google Scholar
  11. D. J. Carreira and K.-H. Chu, “The moment-curvature relationship of RC members,” ACI Journal, vol. 83, no. 2, pp. 191–198, 1986. View at Google Scholar · View at Scopus
  12. R. H. Wood, “Some controversial and curious developments in plastic theory of structures,” in Engineering Plasticity, J. Heyman and F. A. Leckie, Eds., pp. 665–691, Cambridge University Press, Cambridge, UK, 1968. View at Google Scholar
  13. Y. L. Mo, “Investigation of reinforced concrete frame behaviour: theory and tests,” Magazine of Concrete Research, vol. 44, no. 160, pp. 163–173, 1992. View at Google Scholar
  14. M. Jirasek and Z. P. Bazant, Inelastic Analysis of Structures, Jon Wiley & Sons, London, UK, 2002.
  15. S. Chandrasekaran, L. Nunziante, G. Serino, and F. Carannante, “Curvature ductility of RC sections based on Eurocode: analytical procedure,” KSCE Journal of Civil Engineering, vol. 15, no. 1, pp. 131–144, 2011. View at Google Scholar
  16. M. Fossetti and M. Papia, “Dimensionless analysis of RC rectangular sections under axial load and biaxial bending,” Engineering Structures, vol. 44, pp. 34–45, 2012. View at Google Scholar
  17. P. Colajanni, M. Fossetti, and M. Papia, “Analytical prediction of ultimate moment and curvature of RC rectangular sections in compression,” Bulletin of Earthquake Engineering, 2013. View at Publisher · View at Google Scholar
  18. M. Saatcioglu and S. R. Razvi, “Strength and ductility of confined concrete,” Journal of Structural Engineering, vol. 118, no. 6, pp. 1590–1607, 1992. View at Google Scholar · View at Scopus
  19. M. Saatcioglu, A. H. Salamat, and S. R. Razvi, “Confined columns under eccentric loading,” Journal of Structural Engineering, vol. 121, no. 11, pp. 1547–1556, 1995. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Campione, M. Fossetti, and M. Papia, “Simplified analytical model for compressed high-strength columns confined by transverse steel and longitudinal bars,” in Proceedings of the 2nd FIB Congress, Naples, Italy, 2006.
  21. G. Campione, M. Fossetti, and M. Papia, “Behavior of fiber-reinforced concrete columns under axially and eccentrically compressive loads,” ACI Structural Journal, vol. 107, no. 3, pp. 272–281, 2010. View at Google Scholar · View at Scopus
  22. G. Campione, M. Fossetti, G. Minafò, and M. Papia, “Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns,” Engineering Structures, vol. 34, pp. 371–382, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. E. Hognestad, A Study of Combined Bending and Axial Load in Reinforced Concrete Members, Bulletin Series No. 399, Engineering Experiment Station, University of Illinois, Urbana, Ill, USA, 1951.
  24. B. D. Scott, R. Park, and M. J. N. Priestley, “Stress-strain behaviour of concrete confined by overlapping hoops at low and high strain rate,” ACI Journal, vol. 79, no. 2, pp. 13–27, 1982. View at Google Scholar · View at Scopus
  25. J. B. Mander, M. J. N. Priestley, and R. Park, “Theoretical Stress-strain model for confined concrete,” Journal of Structural Engineering, vol. 114, no. 8, pp. 1804–1826, 1988. View at Google Scholar · View at Scopus
  26. R. P. Dhakal and K. Maekawa, “Modeling for postyield buckling of reinforcement,” Journal of Structural Engineering, vol. 128, no. 9, pp. 1139–1147, 2002. View at Publisher · View at Google Scholar · View at Scopus
  27. F. A. Zahn, R. Park, and M. J. N. Priestley, “Strength and ductility of square reinforced concrete column sections subjected to biaxial bending,” ACI Structural Journal, vol. 86, no. 2, pp. 123–131, 1989. View at Google Scholar · View at Scopus
  28. Building Code Requirements for Structural Concrete and Commentary, ACI 318, American Concrete Institute (ACI), 2008.