Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 1841267, 14 pages
https://doi.org/10.1155/2018/1841267
Research Article

Experimental Research on Destruction Mode and Anchoring Performance of Carbon Fiber Phyllostachys pubescens Anchor Rod with Different Forms

1School of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
2Shaanxi Provincial Institute of Cultural Heritage, Xi’an 710075, China

Correspondence should be addressed to Wang Yulan; moc.qq@725535643

Received 12 August 2017; Accepted 31 January 2018; Published 18 March 2018

Academic Editor: Venu G. M. Annamdas

Copyright © 2018 Wang Yulan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. Dong, M. Xiaofei, and C. Ping, “Research on reinforcement of earthen architecture site with geo-filament anchor,” Chinese Industrial Construction, vol. 38, no. 1, pp. 114–116, 2008. View at Google Scholar
  2. M.-L. Sun, “Research status and development of the conservation of earthen sites,” Science of Conservation and Archeology, vol. 19, no. 4, pp. 64–69, 2007. View at Google Scholar
  3. G. Li, L. Gao, Z. Huang, and D. Zhang, “Pull-out model experiment on failure mechanism of full-length bonding glass fiber reinforced polymer rebar,” Chinese Journal of Rock Mechanics and Engineering, vol. 26, no. 8, pp. 1653–1663, 2007. View at Google Scholar
  4. E. A. Ahmed, E. F. El-Salakawy, and B. Benmokrane, “Tensile capacity of GFRP postinstalled adhesive anchors in concrete,” Journal of Composite for Construction, vol. 12, no. 6, pp. 596–607, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Zhang, B. Benmokrane, A. Usama, and A. Ebead, “Design and evaluation of fiber-reinforced polymer bond-type anchorages and ground anchors,” International Journal of Geomechanics, vol. 6, no. 3, pp. 166–175, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. H.-D. Liu, X.-Z. Yu, and G.-W. Li, “Experimental study on tensile mechanical properties of glass fiber reinforced plastic rebar,” Chinese Journal of Rock Mechanics and Engineering, vol. 24, no. 20, pp. 3719–3723, 2005. View at Google Scholar
  7. M.-L. Sun, X.-D. Wang, Z.-X. Li, and L. Zhang, “Study on immature earthen sites reinforced with wood anchor,” Chinese Journal of Geotechnical Engineering, vol. 28, no. 12, pp. 2156–2159, 2006. View at Google Scholar
  8. Z. Wu, S. Yang, J. Zheng, and X. Hu, “Analytical solution for the pull-out response of FRP rods embedded in steel tubers filled with cement grout,” Material and Structures, vol. 43, no. 5, pp. 597–609, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. F. F. Ren, Z. J. Yang, J. F. Chen, and W. W. Chen, “An analytical analysis of the full-range behaviour of grouted rockbolts based on a tri-linear bond-slip model,” Construction and Building Materials, vol. 24, pp. 361–370, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. B. Benmokrane, B. Zhang, and A. Chennouf, “Tensive properties and pullout behaviour of AFRP and CFRP rods for grouted anchor applications,” Construction and Building Materials, vol. 14, no. 3, pp. 157–170, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. S. C. Lakkad and J. M. Patel, “Mechanical properties of bamboo, a natural composite,” Fibre Science and Technology, vol. 14, no. 4, pp. 319–322, 1981. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Wang and D. Zhao, “The deterioration inspection and cause analysis for Ming-Jing Tai,” Electronic Journal of Geotechnical Engineering, vol. 21, no. 7, pp. 1659–1680, 2016. View at Google Scholar
  13. S. Chuma, M. Hirohashi, T. Ohgama, and Y. Kasahara, “Composite structure and tensile properties of mousou bamboo,” Journal of the Society of Materials Science, Japan, vol. 39, no. 442, pp. 847–851, 1990. View at Publisher · View at Google Scholar · View at Scopus
  14. Z.-P. Shao, C.-H. Fang, and G.-L. Tian, “Mode I interlaminar fracture property of moso bamboo (Phyllostachys pubescens),” Wood Science and Technology, vol. 45, no. 5-6, pp. 527–536, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. E. Obataya, P. Kitin, and H. Yamauchi, “Bending characteristics of bamboo (Phyllostachys pubescens) with respect to its fiber–foam composite structure,” Wood Science and Technology, vol. 41, no. 5, pp. 385–400, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Ahmad and F. A. Kamke, “Analysis of Calcutta bamboo for structural composite materials. Physical and mechanical properties,” Wood Science and Technology, vol. 39, no. 6, pp. 448–459, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. Z.-P. Shao, C.-H. Fang, S.-X. Huang, and G.-L. Tian, “Tensile properties of Moso bamboo (Phyllostachys pubescens) and its components with respect to its fiber-reinforced composite structure,” Wood Science and Technology, vol. 44, no. 4, pp. 655–666, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. R. S. Merifield and S. W. Sloan, “The ultimate pullout capacity of anchors in frictional soils,” Canadian Geotechnical Journal, vol. 43, no. 8, pp. 852–868, 2006. View at Publisher · View at Google Scholar · View at Scopus