Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 1927135, 10 pages
https://doi.org/10.1155/2018/1927135
Research Article

Waste Foundry Sand Usage for Building Material Production: A First Geopolymer Record in Material Reuse

Department of Environmental Engineering, Niğde Ömer Halisdemir University, Niğde 51240, Turkey

Correspondence should be addressed to Neslihan Doğan-Sağlamtimur; moc.liamg@rumitmalgasnagodnahilsen

Received 6 December 2017; Accepted 26 April 2018; Published 17 May 2018

Academic Editor: Evangelos J. Sapountzakis

Copyright © 2018 Neslihan Doğan-Sağlamtimur. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. M. Başar and N. D. Aksoy, “Recovery applications of waste foundry sand,” Journal of Engineering and Natural Sciences, vol. 30, pp. 205–224, 2012. View at Google Scholar
  2. Ü. Kepez, Foundry Sector in Turkey-Iron Casting, TUBITAK TÜBİTAK Metal Technology Platform Creation Workshop, Kocaeli, Turkey, 2007, in Turkish.
  3. R. Siddique, G. Kaur, and G. Rajor, “Waste foundry sand and its leachate characteristics,” Resources, Conservation and Recycling, vol. 54, no. 12, pp. 1027–1036, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. I. Kaur, Mechanical Properties of Concrete Incorporating Used Foundry Sand, Thapar Institute of Engineering and Technology, Deemed University, Punjab, India, 2006, MSc thesis.
  5. S. Javed and C. W. Lovell, “Use of waste foundry sand in civil engineering,” Transportation Research Board, vol. 1486, pp. 109–113, 1994. View at Google Scholar
  6. H. M. Başar and N. D. Aksoy, “Investigation of usability of waste foundry sand in ready-mixed concrete,” Journal of Engineering and Natural Sciences, vol. 31, pp. 517–528, 2013. View at Google Scholar
  7. E. Schultes, Life ‘Hawaman’ Project, LIFE06 TCY/TR/000292, Management of Hazardous Solid Waste generated from Foundries, 2006, in Turkish.
  8. G. Yaylalı, “New world, new trends, technologies and Turkish foundry sector,” Metallurgy Journal, vol. 173, pp. 22–40, 2015, in Turkish. View at Google Scholar
  9. P. Solmaz, Reuse of Waste Foundry Sand as Hydraulic Barriers, Graduate School of Natural and Applied Sciences, İstanbul Technical University, İstanbul, Turkey, 2008, Msc thesis.
  10. T. Gönen, O. Onat, S. Cemalgil, B. Yılmazer, and Y. T. Altuncu, “A review on new waste materials for concrete technology,” Electronic Journal of Construction Technologies, vol. 8, no. 1, pp. 36–43, 2012, in Turkish. View at Google Scholar
  11. T. Kaya and C. Karakurt, “Investigation of the engineering properties of implementation concrete paving stones,” Duzce University Journal of Science and Technology, vol. 2, pp. 469–474, 2016, in Turkish. View at Google Scholar
  12. P. B. Kirk, Field Demonstration of Highway Embankment Constructed using Waste Foundry Sand, Purdue University, West Lafayette, IN, USA, 1998, Ph.D. thesis.
  13. D. G. Mast and P. J. Fox, “Performance evaluation of highway embankment constructed using waste foundry sand,” Geotechnical Special Publication, vol. 79, pp. 66–85, 1998. View at Google Scholar
  14. T. Abichou, C. H. Benson, T. B. Edil, and B. W. Freber, “Using waste foundry sand for hydraulic barriers,” ASCE American Society of Civil Engineers, Geotechnical Special Publication, vol. 79, pp. 86–99, 1998. View at Google Scholar
  15. T. Abichou, C. H. Benson, and T. B. Edil, “Foundry green sands as hydraulic barriers: laboratory study,” ASCE Journal of Geotechnical and Geoenvironmental Engineering, vol. 126, no. 12, pp. 1174–1183, 2000. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Javed, C. W. Lovell, and L. E. Wood, Waste Foundry Sand in Asphalt Concrete, Transportation Research Record no. 1437, Transportation Research Board, Washington, DC, USA, 1994.
  17. R. N. Tarun and S. S. Shiw, “Permeability of flowable slurry materials containing foundry sand and fly ash,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 123, no. 5, pp. 446–452, 1997. View at Publisher · View at Google Scholar · View at Scopus
  18. C. V. Lovell and J. Sayeed, “Use of waste foundry sand in civil engineering,” in Proceedings of Symposium on Engineering Geology and Geotechnical Engineering, vol. 31, pp. 115–123, Reno, NV, USA, March 1995.
  19. H. Greinert, “Biological remediation of the iron foundry wastes,” Soil and Environment, vol. 5, pp. 1227-1228, 1995. View at Publisher · View at Google Scholar
  20. L. N. Reddi, G. P. Rieck, and A. P. Schwab, “Stabilization of pheolics in foundry sand using cementitious materials,” Journal of Hazardous Materials, vol. 45, pp. 89–106, 1996. View at Publisher · View at Google Scholar · View at Scopus
  21. R. K. Ham, W. C. Boyle, and F. Blaha, “Leachability of foundry process solid wastes,” ASTM Special Technical Publication, vol. 933, pp. 28–44, 1986. View at Google Scholar
  22. P. Devaux and J. Vecoven, “Les dechets de sables de fonderie en technique routiere,” Bulletin of the International Association of Engineering Geology, vol. 30, no. 1, pp. 375–378, 1984. View at Publisher · View at Google Scholar · View at Scopus
  23. Institute of British Foundrymen, “Re-usage advantageous of molding sand,” Foundryman, vol. 89, no. 11, pp. 401-402, 1996. View at Google Scholar
  24. M. Yalçın, Y. Güney, H. Koyuncu, and ÖanF. Baş, “Usability of waste foundry sand in concrete,” in Proceedings of the 5th National Concrete Congress, Istanbul, Turkey, 2003, in Turkish.
  25. A. Deng and P. J. Tikalsky, “Geotechnical and leaching properties of flowable fill ı̇ncorporating waste foundry sand,” Waste Management, vol. 28, no. 11, pp. 2161–2170, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. R. Siddique and A. Noumowe, “Utilization of spent foundry sand in controlled low-strength materials and concrete,” Resources, Conservation and Recycling, vol. 53, no. 1-2, pp. 27–35, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. R. Siddique, G. de Schutter, and A. Noumowe, “Effect of used-foundry sand on the mechanical properties of concrete,” Construction and Building Materials, vol. 23, no. 2, pp. 976–980, 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Guney, Y. D. Sari, M. Yalçın, A. Tuncan, and S. Dönmez, “Re-usage of waste foundry sand in high-strength concrete,” Waste Management, vol. 30, no. 8-9, pp. 1705–1713, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. R. Siddique, Y. Aggarwal, P. Aggarwal, E.-H. Kadri, and R. Bennacer, “Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS),” Construction and Building Materials, vol. 25, no. 4, pp. 1916–1925, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. G. Singh and R. Siddique, “Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete,” Construction and Building Materials, vol. 26, no. 1, pp. 416–422, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. G. Singh and R. Siddique, “Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS),” Construction and Building Materials, vol. 28, no. 1, pp. 421–426, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. U. Akkaya, Use of Foundry Sand as a Landfill Cap Layer Material, Middle East Technical University, Ankara, Turkey, 2015, Msc thesis.
  33. N. Doğan-Sağlamtimur, A. Bilgil, M. Demir et al., “Reuse study from Niğde, Turkey: the conversion of industrial ash to geopolymer,” Desalination and Water Treatment, vol. 57, no. 6, pp. 2604–2615, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. T. O. Yusuf, M. Ismail, J. Usmanx, and A. H. Noruzman, “Impact of blending on strength distribution of ambient cured metakaolin and palm oil fuel ash based geopolymer mortar,” Advances in Civil Engineering, vol. 2014, Article ID 658067, 8 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  35. J. Davidovits, Geopolymer Chemistry and Applications, Institut Géopolymère, Saint Quantin, France, 2008.
  36. P. K. Sarker, R. Haque, and K. V. Ramgolam, “Fracture behaviour of heat cured fly ash based geopolymer concrete,” Materials and Design, vol. 44, pp. 580–586, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. N. Ukwattage, P. Ranjith, M. Yellishetty, H. Bui, and T. Xu, “A laboratory-scale study of the aqueous mineral carbonation of coal fly ash for CO2 sequestration,” Journal of Cleaner Production, vol. 103, pp. 665–674, 2015. View at Publisher · View at Google Scholar · View at Scopus
  38. R. R. T. Dananjayan, P. Kandasamy, and R. Andimuthu, “Direct mineral carbonation of coal fly ash for CO2 sequestration,” Journal of Cleaner Production, vol. 112, pp. 4173–4182, 2016. View at Publisher · View at Google Scholar · View at Scopus
  39. INTES The Turkish Employers’ Association of Construction Industries, Construction Industry Report, 2014, http://www.intes.org.tr/content/MArt-2014.pdf.
  40. Method 3051A: Microwave Assisted Acid Digestion of Sediments, Sludges, Soils, and Oils, 2015, https://www.epa.gov/sites/production/files/2015-12/documents/3051a.pdf.
  41. Method 200.7: Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry, 2018, https://www.epa.gov/homeland-security-research/method-2007-determination-metals-and-trace-elements-water-and-wastes.
  42. TS EN 933–10, Tests for Geometrical Properties of Aggregates-Part 10: Assessment of Fines-Grading of Filler Aggregates (Air Jet Sieving), 2018, https://intweb.tse.org.tr/Standard/Standard/Standard.aspx?081118051115108051104119110104055047105102120088111043113104073088121069048051067102099115100056.
  43. TS 699, Natural Building Stones-Methods of Inspection and Laboratory Testing, 2018, https://intweb.tse.org.tr/standard/standard/Standard.aspx?081118051115108051104119110104055047105102120088111043113104073097080105101118119097052047104083.