Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 2384579, 10 pages
https://doi.org/10.1155/2018/2384579
Research Article

Simulation Study on Strength and Failure Characteristics for Granite with a Set of Cross-Joints of Different Lengths

1State Key Laboratory of Mine Disaster Prevention and Control, Shandong University of Science and Technology, Qingdao 266590, China
2Key Laboratory of Safety and High-Efficiency Coal Mining, Ministry of Education, Anhui University of Science and Technology, Huainan 232001, China
3Centre for Geosciences Computing, School of Earth Sciences, University of Queensland, Brisbane, QLD 4072, Australia

Correspondence should be addressed to Shaojie Chen; moc.361@bywjsc

Received 16 September 2017; Revised 4 January 2018; Accepted 14 January 2018; Published 13 March 2018

Academic Editor: Rihong Cao

Copyright © 2018 Dawei Yin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Y. Wang, S. W. Sloan, D. C. Sheng, S. Q. Yang, and C. A. Tang, “Numerical study of failure behaviour of pre-cracked rock specimens under conventional triaxial compression,” International Journal of Solids and Structures, vol. 51, no. 5, pp. 1132–1148, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Wang, W. B. Zhou, J. H. Chen, X. Xiao, Y. Li, and X. Y. Zhao, “Simulation of hydraulic fracturing using particle flow method and application in a coal mine,” International Journal of Coal Geology, vol. 121, pp. 1–13, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. S. R. Wang, H. G. Xiao, P. Hagan, and Z. S. Zou, “Mechanical behavior of fully-grouted bolt in jointed rocks subjected to double shear tests,” DYNA, vol. 92, no. 3, pp. 314–320, 2017. View at Google Scholar
  4. H. Z. Li, C. C. Xia, X. D. Wang, J. F. Zhou, and C. S. Zhang, “Experimental study on deformation and strength properties of jointed marble specimens,” Chinese Journal of Rock Mechanics and Engineering, vol. 27, no. 10, pp. 2118–2123, 2008. View at Google Scholar
  5. H. Niandou, J. F. Shao, J. P. Henry, and D. Fourmaintraux, “Laboratory investigation of the mechanical behavior of Tournemire shale,” International Journal of Rock Mechanics and Mining Sciences, vol. 34, no. 1, pp. 3–16, 1997. View at Publisher · View at Google Scholar
  6. H. J. Mao and C. H. Yang, “Study on effect of discontinuities on mechanical characters of slate,” Chinese Journal of Rock Mechanics and Engineering, vol. 24, no. 20, pp. 3651–3656, 2005. View at Google Scholar
  7. M. Prudencio and M. V. S. Jan, “Strength and failure modes of rock mass models with non-persistent joints,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 6, pp. 890–902, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Chen, Z. H. Liao, and D. J. Li, “Experimental study of effects of joint inclination angle and connectivity rate on strength and deformation properties of rock masses under uniaxial compression,” Chinese Journal of Rock Mechanics and Engineering, vol. 30, no. 4, pp. 781–789, 2011. View at Google Scholar
  9. C. Gehle and H. K. Kutter, “Breakage and shear behaviour of intermittent rock joints,” International Journal of Rock Mechanics and Mining Sciences, vol. 40, no. 5, pp. 687–700, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. W. M. Xiao, R. G. Deng, X. M. Fu, and C. Y. Wang, “Model experiments on deformation and strength anisotropy of columnar jointed rock masses under uniaxial compression,” Chinese Journal of Rock Mechanics and Engineering, vol. 33, no. 5, pp. 957–963, 2014. View at Google Scholar
  11. M. Goldstein, B. Goosev, N. Pvrogovsky, R. Tulinov, and A. Turovskaya, “Investigation of mechanical properties of cracked rock,” Surface Review and Letters, vol. 7, no. 7, pp. 667–671, 1966. View at Google Scholar
  12. G. Reik and M. Zacas, “Strength and deformation characteristics of jointed media in true triaxial compression,” International Journal of Rock Mechanics and Mining Sciences, vol. 15, no. 6, pp. 295–303, 1978. View at Publisher · View at Google Scholar · View at Scopus
  13. E. Z. Laijtai, “Strength of discontinuous rocks in direct shear,” Géotechnique, vol. 19, no. 2, pp. 218–233, 1969. View at Google Scholar
  14. Y. Zhou, S. C. Wu, Y. T. Gao, and A. Misra, “Macro and meso analysis of jointed rock mass triaxial compression test by using equivalent rock mass (ERM) technique,” Journal of Central South University, vol. 21, no. 3, pp. 1125–1135, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. X. B. Wang, “Effect of joint inclination on deformation and failure of rock specimen with a single joint in plane strain compression,” Journal of Sichuan University, vol. 38, no. 2, pp. 24–29, 2006. View at Google Scholar
  16. S. Q. Yang and Y. H. Huang, “Particle flow study on strength and meso-mechanism of Brazilian splitting test for jointed rock mass,” Acta Mechanica Sinica, vol. 30, no. 4, pp. 547–558, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. L. Yang, Y. Jiang, S. Li, and B. Li, “Experimental and numerical research on 3D crack growth in rocklike material subjected to uniaxial tension,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 139, no. 10, pp. 1781–1788, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. S. P. Morgan, C. A. Johnson, and H. H. Einstein, “Cracking processes in Barre granite: fracture process zones and crack coalescence,” International Journal of Fracture, vol. 180, no. 2, pp. 177–204, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. D. W. Yin, S. J. Chen, X. Q. Liu, and H. F. Ma, “Effect of joint angle in coal on failure mechanical behavior of roof rock-coal combined body,” Quarterly Journal of Engineering Geology and Hydrogeology, 2017. View at Publisher · View at Google Scholar
  20. P. Kulatilake, B. Malama, and J. Wang, “Physical and particle flow modeling of jointed rock block behavior under uniaxial loading,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 5, pp. 641–657, 2001. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. H. Huang and S. Q. Yang, “Discrete element study on strength and failure behavior of jointed sandstone with two sets of cross-joints,” Journal of China Coal Society, vol. 40, no. 1, pp. 76–84, 2015. View at Google Scholar
  22. P. A. Cundall and O. D. Strack, “A discrete numerical model for granular assemblies,” Géotechnique, vol. 29, no. 1, pp. 47–65, 1979. View at Publisher · View at Google Scholar · View at Scopus
  23. T. B. Zhao, W. Y. Guo, C. P. Lu, and G. M. Zhao, “Failure characteristics of combined coal-rock with different interfacial angles,” Geomechanics and Engineering, vol. 11, no. 3, pp. 345–359, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Wang, M. M. Wu, R. Wang, H. Xu, and X. Song, “Height of the mining-induced fractured zone above a coal face,” Engineering Geology, vol. 216, pp. 140–152, 2017. View at Publisher · View at Google Scholar · View at Scopus
  25. J. F. Hazzard, R. P. Young, and S. C. Maxwell, “Micro-mechanical modeling of cracking and failure in brittle rocks,” Journal of Geophysical Research, vol. 105, no. 7, pp. 16683–16697, 2000. View at Publisher · View at Google Scholar
  26. A. Manouchehrian, M. Sharifzadeh, M. F. Marji, and J. Gholamnejad, “A bonded particle model for analysis of the flaw orientation effect on crack propagation mechanism in brittle materials under compression,” Archives of Civil and Mechanical Engineering, vol. 14, no. 1, pp. 40–52, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Lee and S. Jeon, “An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression,” International Journal of Solids and Structures, vol. 48, no. 6, pp. 979–999, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. Z. Z. Liang, H. Xing, S. Y. Wang, D. J. Williams, and C. A. Tang, “A three-dimensional numerical investigation of the fracture of rock specimens containing a pre-existing surface flaw,” Computers and Geotechnics, vol. 45, pp. 19–33, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. Z. J. Wen, X. Wang, Q. H. Li, G. Lin, S. J. Chen, and Y. J. Jiang, “Simulation analysis on the strength and acoustic emission characteristics of jointed rock mass,” Technical Gazette, vol. 23, no. 5, pp. 1277–1284, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. X. Wang, Z. J. Wen, and Y. J. Jiang, “Time-space effect of stress field and damage evolution law of compressed coal-rock,” Geotechnical and Geological Engineering, vol. 34, no. 6, pp. 1933–1940, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. X. P. Zhang, G. Wang, Y. J. Jiang, and N. Huang, “Simulation research on granite compression test based on particle discrete element model,” Rock and Soil Mechanics, vol. 35, no. 1, pp. 99–105, 2014. View at Google Scholar
  32. G. Wang, X. P. Zhang, Y. J. Jiang, B. Li, X. Z. Wu, and N. Huang, “Meso-mechanism research on shear failure of rock joint based on particle discrete element method,” Journal of Central South University, vol. 46, no. 4, pp. 1442–143, 2015. View at Google Scholar
  33. Itasca Consulting Group, PFC2D (Particle Flow Code in 2 Dimensions) Fish in PFC2D, Itasca Consulting Group, Minneapolis, MN, USA, 2008.
  34. N. Cho, C. D. Martin, and D. C. Sego, “A clumped particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 7, pp. 997–1010, 2007. View at Publisher · View at Google Scholar · View at Scopus
  35. P. F. Yin, “Experiment and particle flow simulation on mechanical properties of layered composite rock under uniaxial compression,” M.Sc. thesis, China University of Mining Technology, Xuzhou, China, 2016. View at Google Scholar
  36. X. P. Zhang and L. N. Y. Wong, “Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach,” Rock Mechanics and Rock Engineering, vol. 45, no. 5, pp. 711–737, 2012. View at Google Scholar