Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 4023178, 7 pages
https://doi.org/10.1155/2018/4023178
Research Article

The Influence of Ground Fly Ash on Cement Hydration and Mechanical Property of Mortar

1College of Hydraulic and Civil Engineering, Shandong Agricultural University, Tai’an, Shandong 271018, China
2School of Mechanics and Civil Engineering, China University of Mining and Technology, Beijing 100083, China
3Department of Civil Engineering, Tsinghua University, Beijing 100084, China

Correspondence should be addressed to Jingjing Feng; nc.ude.uads@gnijgnijgnef

Received 30 September 2017; Revised 3 February 2018; Accepted 19 February 2018; Published 2 May 2018

Academic Editor: Evangelos J. Sapountzakis

Copyright © 2018 Jingjing Feng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Aboustait, T. Kim, M. T. Ley, and J. M. Davis, “Physical and chemical characteristics of fly ash using automated scanning electron microscopy,” Construction and Building Materials, vol. 106, pp. 1–10, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. R. S. Blissett and N. A. Rowson, “A review of the multi-component utilisation of coal fly ash,” Fuel, vol. 97, no. 7, pp. 1–23, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Ahmaruzzaman, “A review on the utilization of fly ash,” Progress in Energy and Combustion Science, vol. 36, no. 3, pp. 327–363, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. H. W. Nugteren, “Coal fly ash: from waste to industrial product,” Particle and Particle Systems Characterization, vol. 24, no. 1, pp. 49–55, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. Huang, T. Zhang, and Z. Wen, “Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes,” Construction and Building Materials, vol. 79, pp. 390–396, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. W. Wongkeo, P. Thongsanitgarn, A. Ngamjarurojana, and A. Chaipanich, “Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume,” Materials and Design, vol. 64, no. 9, pp. 261–269, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Noushini, K. Vessalas, G. Arabian, and B. Samali, “Drying shrinkage behaviour of fibre reinforced concrete incorporating polyvinyl alcohol fibres and fly ash,” Advances in Civil Engineering, vol. 2014, Article ID 836173, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Fernández-Jiménez and A. Palomo, “Composition and microstructure of alkali activated fly ash binder: effect of the activator,” Cement and Concrete Research, vol. 35, no. 10, pp. 1984–1992, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. C. R. Ward and D. French, “Determination of glass content and estimation of glass composition in fly ash using quantitative X-ray diffractometry,” Fuel, vol. 85, no. 16, pp. 2268–2277, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Wang, C. Zhang, and W. Sun, “Fly ash effects: iii. The microaggregate effect of fly ash,” Cement and Concrete Research, vol. 34, no. 11, pp. 2061–2066, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. W. Ma and P. W. Brown, “Hydrothermal reactions of fly ash with Ca(OH)2 and CaSO4·2H2O,” Cement and Concrete Research, vol. 27, no. 8, pp. 1237–1248, 1997. View at Publisher · View at Google Scholar · View at Scopus
  12. W. Qiang, S. Mengxiao, and W. Dengquan, “Contributions of fly ash and ground granulated blast furnace slag to the early hydration heat of composite binder at different curing temperatures,” Advances in Cement Research, vol. 28, no. 5, pp. 320–327, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Hanehara, F. Tomosawa, M. Kobayakawa, and K. R. Hwang, “Effects of water/powder ratio, mixing ratio of fly ash, and curing temperature on pozzolanic reaction of fly ash in cement paste,” Cement and Concrete Research, vol. 31, no. 1, pp. 31–39, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Zhang, W. Sun, and S. Liu, “Study on the hydration heat of binder paste in high-performance concrete,” Cement and Concrete Research, vol. 32, no. 9, pp. 1483–1488, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Amnadnua, W. Tangchirapat, and C. Jaturapitakkul, “Strength, water permeability, and heat evolution of high strength concrete made from the mixture of calcium carbide residue and fly ash,” Materials and Design, vol. 51, no. 5, pp. 894–901, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Fanghui, L. Renguang, W. Dongming, and Y. Peiyu, “Characteristics of the hydration heat evolution of composite binder at different hydrating temperature,” Thermochimica Acta, vol. 586, no. 8, pp. 52–57, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. B. Liu, Y. Xie, and J. Li, “Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials,” Cement and Concrete Research, vol. 35, no. 5, pp. 994–998, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. L. Mengyuan, W. Qiang, and Y. Jun, “Influence of steam curing method on the performance of concrete containing a large portion of mineral admixtures,” Advances in Materials Science and Engineering, vol. 2017, Article ID 9863219, 11 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  19. P. Chindaprasirt and U. Rattanasak, “Shrinkage behavior of structural foam lightweight concrete containing glycol compounds and fly ash,” Materials and Design, vol. 32, no. 2, pp. 723–727, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. S. A. Kristiawan and M. T. M. Aditya, “Effect of high volume fly ash on shrinkage of self-compacting concrete,” Procedia Engineering, vol. 125, pp. 705–712, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Jun, W. Qiang, and Z. Yuqi, “Influence of curing time on the drying shrinkage of concretes with different binders and water-to-binder ratios,” Advances in Materials Science and Engineering, vol. 2017, Article ID 2695435, 10 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Dinakar, M. K. Reddy, and M. Sharma, “Behaviour of self-compacting concrete using Portland pozzolana cement with different levels of fly ash,” Materials and Design, vol. 46, no. 4, pp. 609–616, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Mengxiao, W. Qiang, and Z. Zhikai, “Comparison of the properties between high-volume fly ash concrete and high–volume steel slag concrete under temperature matching curing condition,” Construction and Building Materials, vol. 98, pp. 649–655, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Zuquan, S. Wei, Z. Yunsheng, J. Jinyang, and L. Jianzhong, “Interaction between sulfate and chloride solution attack of concretes with and without fly ash,” Cement and Concrete Research, vol. 37, no. 8, pp. 1223–1232, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Chalee, P. Ausapanit, and C. Jaturapitakkul, “Utilization of fly ash concrete in marine environment for long term design life analysis,” Materials and Design, vol. 31, no. 3, pp. 1242–1249, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. A. Mehta and R. Siddique, “Sulfuric acid resistance of fly ash based geopolymer concrete,” Construction and Building Materials, vol. 146, pp. 136–143, 2017. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Gao, B. He, Y. Li, J. Tang, and L. Qu, “Effects of nano–particles on improvement in wear resistance and drying shrinkage of road fly ash concrete,” Construction and Building Materials, vol. 151, pp. 228–235, 2017. View at Publisher · View at Google Scholar · View at Scopus
  28. A. K. Saha and P. K. Sarker, “Sustainable use of ferronickel slag fine aggregate and fly ash in structural concrete: mechanical properties and leaching study,” Journal of Cleaner Production, vol. 162, pp. 438–448, 2017. View at Publisher · View at Google Scholar · View at Scopus
  29. L. Lam, Y. L. Wong, and C. S. Poon, “Degree of hydration and gel/space ratio of high-volume fly ash/cement systems,” Cement and Concrete Research, vol. 30, no. 5, pp. 747–756, 2000. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. M. Zhang, W. Sun, and H. D. Yan, “Hydration of high-volume fly ash cement pastes,” Cement and Concrete Composites, vol. 22, no. 6, pp. 445–452, 2000. View at Publisher · View at Google Scholar · View at Scopus