Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 4650102, 14 pages
https://doi.org/10.1155/2018/4650102
Research Article

Efficient Adaptive Test Method for Textile Development Length in TRC

Research Area Environmental Risks in Urban and Regional Development, Leibniz Institute of Ecological Urban and Regional Development (IOER), Dresden 01217, Germany

Correspondence should be addressed to Regine Ortlepp; ed.reoi@ppeltro.r

Received 31 January 2018; Accepted 25 June 2018; Published 15 July 2018

Academic Editor: Constantin Chalioris

Copyright © 2018 Regine Ortlepp. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. TUDALIT eV, Leichter Bauen–Zukunft Formen, German, 2017, http://tudalit.de/.
  2. Kompetenzzentrum TEXTILBETON, Competence Centre Textile Reinforced Concrete, January 2018, http://www.textilbeton-aachen.de/index.php?id=142?lang=en.
  3. Institute of Concrete Structure, Collaborative Research Centre (CRC, in German: SFB) 528, January 2018, https://tu-dresden.de/bu/bauingenieurwesen/imb/forschung/sfb528.
  4. B. Mobasher, Mechanics of Fiber and Textile Reinforced Cement Composites, CRC Press, Boca Raton, FL, USA, 2011.
  5. A. Peled and A. Bentur, “Fabric structure and its reinforcing efficiency in textile reinforced cement composite,” Composites Part A Applied Science and Manufacturing, vol. 34, no. 2, pp. 107–118, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Peled, A. Bentur, and B. Mobasher, Textile Reinforced Concrete, CRC Press, Boca Raton, FL, USA, 2017.
  7. M. E. A. Fidelis, F. de Andrade Silva, and R. D. T. Filho, “The influence of fiber treatment on the mechanical behavior of jute textile reinforced concrete,” Key Engineering Materials, vol. 600, pp. 469–474, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. F. de Andrade Silva, M. Butler, S. Hempel, R. D. T. Filho, and V. Mechtcherine, “Effects of elevated temperatures on the interface properties of carbon textile-reinforced concrete,” Cement and Concrete Composites, vol. 48, pp. 26–34, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. C. G. Papanicolaou, T. C. Triantafillou, M. Papathanasiou, and K. Karlos, “Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading,” Materials and Structures, vol. 41, no. 1, pp. 143–157, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. T. C. Triantafillou and C. G. Papanicolaou, “Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets,” Materials and Structures, vol. 39, no. 1, pp. 93–103, 2006. View at Publisher · View at Google Scholar
  11. T. C. Triantafillou, C. G. Papanicolaou, P. Zissimopoulos, and T. Laourdekis, “Concrete confinement with textile-reinforced mortar jackets,” ACI Structural Journal, vol. 103, no. 1, pp. 28–37, 2006. View at Publisher · View at Google Scholar
  12. T. Blanksvärd and B. Täljsten, “Strengthening of concrete structures with cement based bonded composites,” Nordic Concrete Research, vol. 2, no. 38, pp. 133–153, 2008. View at Google Scholar
  13. I. G. Colombo, M. Colombo, and M. di Prisco, “Bending behaviour of textile reinforced concrete sandwich beams,” Construction and Building Materials, vol. 95, pp. 675–685, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. I. G. Colombo, A. Magri, G. Zani, M. Colombo, and M. di Prisco, “Erratum to: textile reinforced concrete: experimental investigation on design parameters,” Materials and Structures, vol. 46, no. 11, p. 1953, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. C. Escrig, L. Gil, E. Bernat-Maso, and F. Puigvert, “Experimental and analytical study of reinforced concrete beams shear strengthened with different types of textile-reinforced mortar,” Construction and Building Materials, vol. 83, pp. 248–260, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. N. Cauberg, T. Tysmans, S. Adriaenssens, J. Wastiels, M. Mollaert, and B. Belkassem, “Shell elements of textile reinforced concrete using fabric formwork: a case study,” Advances in Structural Engineering, vol. 15, no. 4, pp. 677–689, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. T. Tysmans, S. Adriaenssens, H. Cuypers, and J. Wastiels, “Structural analysis of small span textile reinforced concrete shells with double curvature,” Composites Science and Technology, vol. 69, no. 11–12, pp. 1790–1796, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. R. Contamine, A. Si Larbi, and P. Hamelin, “Identifying the contributing mechanisms of textile reinforced concrete (TRC) in the case of shear repairing damaged and reinforced concrete beams,” Engineering Structures, vol. 46, pp. 447–458, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. Z. C. Tetta, L. N. Koutas, and D. A. Bournas, “Textile-reinforced mortar (TRM) versus fiber-reinforced polymers (FRP) in shear strengthening of concrete beams,” Composites Part B: Engineering, vol. 77, pp. 338–348, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Williams Portal, I. F. Perez, L. N. Thrane, and K. Lundgren, “Pull-out of textile reinforcement in concrete,” Construction and Building Materials, vol. 71, pp. 63–71, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. N. Williams Portal, K. Lundgren, H. Wallbaum, and K. Malaga, “Sustainable potential of textile-reinforced concrete,” Journal of Materials in Civil Engineering, vol. 27, no. 7, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Kamani, M. K. Dolatabadi, and A. A. A. Jeddi, “Flexural design of textile-reinforced concrete (TRC) using warp-knitted fabric with improving fiber performance index (FPI),” Journal of The Textile Institute, vol. 109, no. 4, pp. 492–500, 2018. View at Publisher · View at Google Scholar · View at Scopus
  23. W. Brameshuber, Textile Reinforced Concrete: State-of-the-Art Report of RILEM Technical Committee 201–TRC: Textile Reinforced Concrete, RILEM, Report 36, RILEM, Bagneux, France, 2006.
  24. RILEM Technical Committee 232-TDT (Wolfgang Brameshuber), “Recommendation of RILEM TC 232-TDT: test methods and design of textile reinforced concrete–Uniaxial tensile test: test method to determine the load bearing behavior of tensile specimens made of textile reinforced concrete,” Materials and Structures, vol. 49, no. 12, pp. 4923–4927, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Hegger, C. Kulas, and M. Horstmann, “Realization of TRC façades with impregnated AR-glass textiles,” Key Engineering Materials, vol. 466, pp. 121–130, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Hegger, C. Kulas, H. N. Schneider et al., “TRC pedestrian bridge - design, load-bearing behavior and production processes of a slender and light-weight construction,” in International RILEM Conference on Material Science, pp. 353–364, RILEM Publications, Bagneux, France, 2010.
  27. S. Scheerer, R. Chudoba, MP. Garibaldi, and M. Curbach, “Shells made of textile reinforced concrete,” Journal of the International Association for Shell And Spatial Structures, vol. 58, no. 1, pp. 79–93, 2017. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Schladitz, A. Hoffmann, W. Graf, E. Lorenz, and F. Jesse, “Strengthening of a barrel shell with textile reinforced concrete–Part I: dimensioning and design,” in Proceedings of the ACI 2010 Spring Convention, Chicago, IL, USA, 2010.
  29. S. Weiland, R. Ortlepp, B. Hauptenbuchner, and M. Curbach, “Textile reinforced concrete for flexural strengthening of RC-structures–Part 2: application on a Hypar concrete shell,” in ACI SP-251-3 Design & Applications of Textile-Reinforced Concrete, ACI, Quebec, QC, Canada, 2008. View at Google Scholar
  30. A. Brückner, R. Ortlepp, and M. Curbach, “Textile reinforced concrete for strengthening in bending and shear,” Materials and Structures, vol. 39, no. 8, pp. 741–748, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. F. Schladitz, A. Brückner, R. Ortlepp, and M. Curbach, “Shear force strengthening of large, reinforced concrete components using Textile Reinforced Concrete (TRC),” in Proceedings of the 18th Congress of the International Glassfibre Reinforced Concrete Association, Ottawa, ON, Canada, 2008.
  32. A. Si Larbi, R. Contamine, E. Ferrier, and P. Hamelin, “Shear strengthening of RC beams with textile reinforced concrete (TRC) plate,” Construction and Building Materials, vol. 24, no. 10, pp. 1928–1936, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. D. A. Bournas, P. V. Lontou, C. G. Papanicolaou, and T. C. Triantafillou, “Textile-reinforced mortar versus fiber-reinforced polymer confinement in reinforced concrete columns,” ACI Structural Journal, vol. 104, no. 6, pp. 740–748, 2007. View at Publisher · View at Google Scholar
  34. L. Ombres, “Confinement effectiveness in concrete strengthened with fiber reinforced cement based composite jackets,” in Proceedings of the 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, Greece, 2007.
  35. R. Ortlepp, A. Lorenz, and M. Curbach, “Column strengthening with TRC: influences of the column geometry onto the confinement effect,” Advances in Materials Science and Engineering, vol. 2009, Article ID 493097, 5 pages, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. M. Butler, V. Mechtcherine, and S. Hempel, “Experimental investigations on the durability of fibre–matrix interfaces in textile-reinforced concrete,” Cement and Concrete Composites, vol. 31, no. 4, pp. 221–231, 2009. View at Publisher · View at Google Scholar · View at Scopus
  37. H. Michler, Application of Textile Reinforced Concrete at a Silo Rehabilitation, January 2018, https://tu-dresden.de/bu/bauingenieurwesen/imb/forschung/Forschungsfelder/TRC-C3/Praxisprojekte/copy6_of_MUSTER?set_language=en.
  38. R. Mishra, J. Militky, N. Gupta, R. Pachauri, and B. K. Behera, “Modelling and simulation of earthquake resistant 3D woven textile structural concrete composites,” Composites Part B: Engineering, vol. 81, pp. 91–97, 2015. View at Publisher · View at Google Scholar · View at Scopus
  39. L. Koutas, S. N. Bousias, and T. C. Triantafillou, “Seismic strengthening of masonry-infilled RC frames with TRM: experimental study,” Journal of Composites for Construction, vol. 19, no. 2, 2015. View at Publisher · View at Google Scholar · View at Scopus
  40. A. M. Dar, S. M. Umair, M. Numada, and K. Meguro, Experiment Study on Reduction of pp-Band Mesh Connectivity for Retrofitting of Masonry Structure, Bulletin of ERS, No. 47, Institute of Industrial Science, University of Tokyo, Tokyo, Japan, 2014, http://www.ers.iis.u-tokyo.ac.jp/pdf/ersno.47/2014-03-no.47-09.pdf.
  41. S. M. Umair, M. Numada, M. N. Amin, and K. Meguro, “Fiber reinforced polymer and polypropylene composite retrofitting technique for masonry structures,” Polymers, vol. 7, no. 5, pp. 963–984, 2015. View at Publisher · View at Google Scholar · View at Scopus
  42. A. Si Larbi, R. Contamine, and P. Hamelin, in TRC and Hybrid Solutions for Repairing and/or Strengthening Reinforced Concrete Beams High Performance Fiber Reinforced Cement Composites 6. RILEM State of the Art Reports, G. J. Parra-Montesinos, H. W. Reinhardt, and A. E. Naaman, Eds., vol. 2, Springer, Dordrecht, Netherlands, 2012.
  43. A. Brückner, R. Ortlepp, and M. Curbach, “Anchoring of shear strengthening for T-beams made of TRC,” Materials and Structures, vol. 41, no. 2, pp. 407–418, 2008. View at Publisher · View at Google Scholar · View at Scopus
  44. R. Ortlepp, U. Hampel, and M. Curbach, “A new approach for evaluating bond capacity of TRC strengthening,” Cement and Concrete Composites, vol. 28, no. 7, pp. 589–597, 2006. View at Publisher · View at Google Scholar · View at Scopus
  45. A. Brückner, R. Ortlepp, and M. Curbach, “Textile reinforced concrete–applications and bond specifics,” in Proceedings of Fib-Symp. Concrete Structures–the Challenge of Creativity (Book of Abstracts and CD-ROM), CEB-FIP, p. 162, Avignon, France, 2004.
  46. R. Ortlepp and M. Curbach, “Bond failure mechanisms of strengthening layers made of textile reinforced concrete,” in Proceedings of 13th Congress of the International Glassfibre Reinforced Concrete Association (Book of abstracts and CD-ROM), Concrete Society and GRCA, Barcelona, Spain, 2003.
  47. R. Ortlepp, S. Ortlepp, and M. Curbach, “Stress transfer in the bond joint of subsequently applied textile reinforced concrete strengthening,” in Proceedings of the ixth International RILEM-Symposium–BEFIB 2004, Bagneux, France, 2004.
  48. R. Ortlepp, “The effective area of an adhesive bond of textile reinforced concrete,” in CEB-FIP (Hrsg.), JCI (Hrsg.), Concrete Society (Hrsg.): Concrete: 21st Century Superhero–Building a Sustainable Future emap Networks–Book of Abstracts and CD-ROM, CEB-FIP, London, UK, 2009. View at Google Scholar
  49. R. Ortlepp, Untersuchungen zur Verbundverankerung textilbewehrter Feinbetonverstärkungsschichten für Betonbauteile [Investigations for the Bond Anchoring of Textile Reinforced Fine-Grained Concrete Strengthening Layers of RC-Members], Dresden, Technische Universität, Fakultät Bauingenieurwesen, Institut für Massivbau, Dresden, Germany, 2007, http://nbn-resolving.de/urn:nbn:de:swb:14-1187166738380-68700.
  50. R. Ortlepp, A. Brückner, and E. Lorenz, “Verbundversagensmechanismen im Verankerungsbereich von textilbewehrten Feinbetonverstärkungsschichten [Bond failure mechanisms in the anchorage range of textile reinforced fine-grained concrete strengthening layers],” in Proceedings of the 4th Colloquium on Textile Reinforced Structures (CTRS4), pp. 433–446, Technische Universität Dresden, In-House Publishing, 2009.
  51. E. Lorenz and R. Ortlepp, “Anchoring failure mechanisms of textile reinforced concrete strengthening of RC structures,” in Proceedings of the ACI 2010 Fall Convention, Pittsburgh, PA, USA, 2010.
  52. H. Aljewifi, B. Fiorio, and J. L. Gallias, “Groups of physical parameters influencing the three stages pull-out behavior of glass multi-filament yarns embedded in micro-concrete,” in High Performance Fiber Reinforced Cement Composites 6. RILEM State of the Art Reports, G. J. Parra-Montesinos, H. W. Reinhardt, and A. E. Naaman, Eds., vol. 2, pp. 117–125, Springer, Dordrecht, Netherlands, 2012. View at Google Scholar
  53. B. Banholzer, W. Brameshuber, and W. Jung, “Analytical simulation of pull-out tests–The direct problem,” Cement and Concrete Composites, vol. 27, no. 1, pp. 93–101, 2005. View at Publisher · View at Google Scholar · View at Scopus
  54. B. Banholzer, W. Brameshuber, and W. Jung, “Analytical evaluation of pull-out tests–The inverse problem,” Cement and Concrete Composites, vol. 28, no. 6, pp. 564–571, 2006. View at Publisher · View at Google Scholar · View at Scopus
  55. M. Krüger, Vorgespannter Textilbewehrter Beton (Pre-Stressed Textile Reinforced Concrete), Institut für Werkstoffe im Bauwesen, Univ. of Stuttgart, Stuttgart, Germany, 2004.
  56. A. Peled, S. Sueki, and B. Mobasher, “Bonding in fabric–cement systems: effects of fabrication methods,” Cement and Concrete Research, vol. 36, no. 9, pp. 1661–1671, 2006. View at Publisher · View at Google Scholar · View at Scopus
  57. S. Xu, M. Krüger, H.-W. Reinhardt, and J. Ožbolt, “bond characteristics of carbon, alkali resistant glass, and aramid textiles in mortar,” Journal of Materials in Civil Engineering, vol. 16, no. 4, pp. 356–364, 2004. View at Publisher · View at Google Scholar · View at Scopus
  58. E. Lorenz, Endverankerung und Übergreifung textiler Bewehrungen in Betonmatrices (End Anchorage and Overlapping of Textile Reinforcements in Concrete), Technische Universität Dresden, Dresden, Germany, 2015, http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-170583.
  59. R. Ortlepp, A. Lorenz, and M. Curbach, “Geometry effects onto the load bearing capacity of column heads strengthened with TRC,” in Proceedings of 2011 fib Symposium: Concrete Engineering for Excellence and Efficiency, pp. 1193–1196, 2011.
  60. M. Hinzen and W. Brameshuber, “RILEM TC TDT-232: round robin test on the uniaxial tensile load bearing behaviour of textile reinforced concrete with two specimens types,” ibac Short Report 24, no. 165, RWTH Aachen University, Aachen, Germany, 2011, http://publications.rwth-aachen.de/record/48108/files/48108_V2.pdf. View at Google Scholar
  61. E. Lorenz, E. Schütze, F. Schladitz, and M. Curbach, “Textilbeton–grundlegende untersuchungen im überblick,” Beton- und Stahlbetonbau, vol. 108, no. 10, pp. 711–722, 2013. View at Publisher · View at Google Scholar · View at Scopus
  62. S. Sueki, C. Soranakom, B. Mobasher, and A. Peled, “Pullout-slip response of fabrics embedded in a cement paste matrix,” Journal of Materials in Civil Engineering, vol. 19, no. 9, pp. 718–27, 2007. View at Publisher · View at Google Scholar · View at Scopus