Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018 (2018), Article ID 5634109, 15 pages
https://doi.org/10.1155/2018/5634109
Research Article

Advances in Civil Engineering Application of DICM on Similar Material Simulation Experiment for Rock-Like Materials

1Civil Engineering Department, Yancheng Institute of Technology, Yancheng, Jiangsu 224051, China
2School of Civil, Environmental and Mining Engineering, The University of Adelaide, Adelaide, SA 5005, Australia

Correspondence should be addressed to Luzhen Wang; moc.621@5nehzulgnaw

Received 20 December 2017; Accepted 5 March 2018; Published 2 April 2018

Academic Editor: Yixian Wang

Copyright © 2018 Hailing Kong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. Yamaguchi, “Speckle displacement and deformation in the diffraction and image fields for small object deformation,” Optica Acta: International Journal of Optics, vol. 28, no. 10, pp. 1359–1376, 1981. View at Publisher · View at Google Scholar · View at Scopus
  2. W. H. Peters and W. F. Ranson, “Digital imaging techniques on experimental stress analysis,” Optical Engineering, vol. 21, no. 3, pp. 427–432, 1982. View at Publisher · View at Google Scholar
  3. W. H. Peters, W. F. Ranson, M. A. Sutton, and J. Anderson, “Application of digital correlation methods to rigid body mechanics,” Optical Engineering, vol. 22, no. 6, pp. 738–742, 1983. View at Publisher · View at Google Scholar
  4. Y. H. Zhao, H. H. Liang, C. Y. Xiong, and J. Fang, “Deformation measurement of rock damage by digital image correlation method,” Chinese Journal of Rock Mechanics and Engineering, vol. 21, no. 1, pp. 73–76, 2002. View at Google Scholar
  5. S. W. Hao, M. F. Xia, F. J. Ke, and Y. L. Bai, “Evolution of localized damage zone in heterogeneous media,” International Journal of Damage Mechanics, vol. 19, no. 7, pp. 787–804, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. S. W. Hao, H. Y. Wang, M. F. Xia, F. J. Ke, and Y. L. Bai, “Relationship between strain localization and catastrophic rupture,” Theoretical and Applied Fracture Mechanics, vol. 48, no. 1, pp. 41–49, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Q. Yang, D. S. Yang, H. W. Jing, Y. H. Li, and S. Y. Wang, “An experimental study of the fracture coalescence behaviour of brittle sandstone specimens containing three fissures,” Rock Mechanics and Rock Engineering, vol. 45, no. 4, pp. 563–582, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Q. Yang and H. W. Jing, “Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression,” International Journal of Fracture, vol. 168, no. 2, pp. 227–250, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Zhao, H. Matsuda, C. Morita, and M. R. Shen, “Study on failure characteristic of rock-like materials with an open-hole under uniaxial compression,” Strain, vol. 47, no. 5, pp. 405–413, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. S. Ma, W. Z. Chen, D. S. Yang, J. P. Yang, and Z. Gong, “Experimental study of brittle rock failure based on three-dimensional digital image correlation technique,” Rock and Soil Mechanics, vol. 38, no. 1, pp. 117–123, 2017. View at Google Scholar
  11. G. Gao, S. Huang, K. Xia, and Z. Li, “Application of digital image correlation (DIC) in dynamic notched semi-circular bend (NSCB) tests,” Experimental Mechanics, vol. 55, no. 1, pp. 95–104, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Gao, W. Yao, K. Xia, and Z. Li, “Investigation of the rate dependence of fracture propagation in rocks using digital image correlation (DIC) method,” Engineering Fracture Mechanics, vol. 138, pp. 146–155, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. S. P. Ma, D. Yan, X. Wang, and Y. Y. Cao, “Damage observation and analysis of a rock Brazilian disc using high-speed DIC method,” Applied Mechanics and Materials, vol. 70, pp. 87–92, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. M. Song, S. P. Ma, X. B. Yang, and X. Wang, “Experimental investigation on failure of rock by digital speckle correlation methods,” Chinese Journal of Rock Mechanics and Engineering, vol. 30, no. 1, pp. 170–175, 2011. View at Google Scholar
  15. J. Dautriat, N. Gland, A. Dimanov, and J. L. Raphanel, “Hydromechanical behavior of heterogeneous carbonate rock under proportional triaxial loadings,” Journal of Geophysical Research: Solid Earth, vol. 116, no. B1, pp. 1–10, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Dautriat, M. Bornert, N. Gland, A. Dimanov, and J. L. Raphanel, “Localized deformation induced by heterogeneities in porous carbonate analysed by multi-scale digital image correlation,” Tectonophysics, vol. 503, no. 1-2, pp. 100–116, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. J. L. Cheng, S. Q. Yang, K. Chen, D. Ma, F.-Y. Li, and L.-M. Wang, “Uniaxial experimental study of the acoustic emission and deformation behavior of composite rock based on 3D digital image correlation (DIC),” Acta Mechanica Sinica, vol. 33, no. 6, pp. 999–1021, 2017. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Hedan, P. Cosenza, V. Valle, P. Dudoignon, A.-L. Fauchille, and J. Cabrerac, “Investigation of the damage induced by desiccation and heating of Tournemire argillites using digital image correlation,” International Journal of Rock Mechanics and Mining Science, vol. 51, pp. 64–75, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. B. F. Li, Y. J. Zuo, W. Li, and J. Cao, “Analysis on fracture mechanics of granite containing flaws based on digital image processing,” Mechanics in Engineering, vol. 38, no. 2, pp. 262–268, 2016. View at Google Scholar
  20. D. Yang, M. Bornert, S. Chanchole, H. Gharbi, P. Valli, and B. Gatmiri, “Dependence of elastic properties of argillaceous rocks on moisture content investigated with optical full-field strain measurement techniques,” International Journal of Rock Mechanics & Mining Science, vol. 53, pp. 45–55, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. D. Yang, M. Bornert, S. Chanchole, L. Wang, P. Valli, and B. Gatmiri, “Experimental investigation of the delayed behavior of unsaturated argillaceous rocks by means of digital image correlation techniques,” Applied Clay Science, vol. 54, no. 1, pp. 53–62, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. X. B. Wang, Y. Z. Du, Y. S. Pan, and L. Gu, “Measurement of shear bands of sand specimens with different water contents under constant strain rate based on digital image correlation method,” Rock and Soil Mechanics, vol. 36, no. 3, pp. 625–632, 2015. View at Google Scholar
  23. X. B. Wang, Y. Z. Du, and Y. S. Pan, “Experimental studies of strain distribution and strain gradients for sand specimens in uniaxial compression based on the digital image correlation with coarse-fine search method,” Chinese Journal of Geotechnical Engineering, vol. 34, no. 11, pp. 2050–2057, 2012. View at Google Scholar
  24. X. B. Wang, Y. Z. Du, and Y. S. Pan, “Measurements of local and global volumetric strains for wet sand specimens under uniaxial compression using digital image correlation method,” Chinese Journal of Geotechnical Engineering, vol. 36, no. 9, pp. 1648–1656, 2014. View at Google Scholar
  25. L. Zinsmeister, J. Dautriat, A. Dimanov, J. Raphanel, and M. Bornert, “Mechanical evolution of an altered limestone using 2D and 3D digital image correlation (DIC),” in Proceedings of the 47th US Rock Mechanics/Geomechanics Symposium, vol. 4, pp. 2965–2979, San Francisco, CA, USA, June 2013.
  26. A. L. Fauchille, S. Hedan, D. Prêt, P. Cosenza, V. Valle, and J. Cabrera, “Relationships between desiccation cracking behavior and microstructure of the Tournemire clay-rock by coupling DIC and SEM methods,” in Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro, IS-Cambridge, vol. 2, pp. 1421–1424, Cambridge, UK, September 2014.
  27. A. L. Fauchille, S. Hedan, V. Valle, D. Pret, J. Cabrera, and P. Cosenza, “Multi-scale study on the deformation and fracture evolution of clay rock sample subjected to desiccation,” Applied Clay Science, vol. 132-133, pp. 251–260, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Hedan, A. L. Fauchille, V. Valle, J. Cabrera, and P. Cosenza, “One-year monitoring of desiccation cracks in Tournemire argillites using digital image correlation,” International Journal of Rock Mechanics and Mining Science, vol. 68, pp. 22–35, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. S. Chen, Z. Q. Yue, and L. G. Tham, “Digital image based numerical modeling method for heterogeneous geomaterials,” Chinese Journal of Geotechnical Engineering, vol. 27, no. 8, pp. 956–964, 2005. View at Google Scholar
  30. Z. Q. Yue, “Digital representation of meso-geomaterial spatial distribution and associated numerical analysis of geomechanics: methods, applications and developments,” Chinese Journal of Rock Mechanics and Engineering, vol. 25, no. 5, pp. 875–888, 2006. View at Google Scholar
  31. M. Bornert, F. Brémand, P. Doumalin et al., “Assessment of digital image correlation measurement errors: methodology and results,” Experimental Mechanics, vol. 49, no. 3, pp. 353–370, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. T. L. Nguyen, S. A. Hall, P. Vacher, and G. Viggiani, “Fracture mechanism material simulation in soft rock: identification and quantification of evolving displacement discontinuities by extended digital image correlation,” Tectonophysics, vol. 503, no. 1-2, pp. 117–128, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. V. Valle, S. Hedan, P. Cosenza, A. L. Fauchille, and M. Berdjane, “Digital image correlation development for study of materials including multiple crossing cracks,” Experimental Mechanics, vol. 55, no. 2, pp. 379–391, 2015. View at Publisher · View at Google Scholar · View at Scopus
  34. Y. Chen, J. X. Wei, H. L. Huang, W. Jin, and Q. J. Yu, “Application of 3D-DIC to characterize the effect of aggregate size and volume on non-uniform shrinkage strain distribution in concrete,” Cement and Concrete Composites, vol. 86, pp. 178–189, 2018. View at Publisher · View at Google Scholar · View at Scopus
  35. C. G. Su, D. Liu, C. X. Ding, C. Gong, P. Zhao, and X. Liu, “Experimental study on bond performances of track slab and mortar based on DIC technology,” KSCE Journal of Civil Engineering, vol. 10, pp. 1–10, 2018. View at Google Scholar
  36. L. T. Mao, X. X. Zhu, L. Q. An, G. S. Cai, and N. Hao, “Application of digital target marker image correlation method in model experiment,” Journal of Liaoning Technical University, vol. 32, no. 10, pp. 1367–1373, 2013. View at Google Scholar
  37. H. Wang, Z. Y. Zhu, H. Z. Liu, and L. T. Mao, “Application of digital target marker correlation method and digital image correlation method in model experiment,” in Proceedings of the 23th Annual Conference of the Beijing Mechanical Association, 2017 USTB, pp. 453-454, Beijing, China, 2017.
  38. C. J. Guo, C. Q. Nan, and D. Wang, “Similar material simulation experiment on overburden rock movement of close-distance coal seams,” Metal Mine, vol. 463, pp. 10–15, 2015. View at Google Scholar
  39. H. C. Li, Similar Simulation Test of Mine Pressure, China University of Mining and Technology Press, Xuzhou, China, 1988.
  40. F. Gao, K. P. Zhou, W. J. Dong, and J. H. Su, “Similar material simulation of time series system for induced caving of roof in continuous mining under backfill,” Journal of Central South University of Technology, vol. 15, no. 3, pp. 356–360, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. H. W. Wang, H. W. Zhou, J. P. Zuo, Z. G. Wang, and H. P. Xie, “Application of optical measurement method in strata movement simulation experiment,” Journal of China Coal Society, vol. 31, no. 3, pp. 278–281, 2006. View at Google Scholar
  42. H. Yanli, Z. Jixiong, A. Baifu, and Z. Qiang, “Overlying strata movement law in fully mechanized coal mining and backfilling longwall face by similar physical simulation,” Journal of Mining Science, vol. 47, no. 5, pp. 618–627, 2011. View at Publisher · View at Google Scholar · View at Scopus