Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 7382481, 12 pages
https://doi.org/10.1155/2018/7382481
Research Article

Effective Semiactive Base Isolation System under Multiple Earthquakes

Faculty of Engineering, Department of Civil Engineering, University of Mohaghegh Ardabili, Ardabil, Iran

Correspondence should be addressed to Mohtasham Mohebbi; ri.ca.amu@ibbehom

Received 22 August 2017; Revised 11 December 2017; Accepted 13 December 2017; Published 27 February 2018

Academic Editor: Hossein Moayedi

Copyright © 2018 Mohtasham Mohebbi and Hamed Dadkhah. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Naeim and J. M. Kelly, Design of Seismic Isolated Structure: From Theory to Practice, Wiley, New York, NY, USA, 1999.
  2. M. C. Constantinou, M. D. Symans, P. Tsopelas, and D. P. Taylor, “Fluid dampers in applications of seismic energy dissipation and seismic isolation,” in Proceedings of ATC-17-1 Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control, San Francisco, CA, USA, March 1993.
  3. T. Kobori, M. Takahashi, T. Nasu, N. Niwa, and K. Ogasawara, “Seismic response controlled structure with active variable stiffness system,” Earthquake Engineering and Structural Dynamics, vol. 22, no. 11, pp. 925–941, 1993. View at Publisher · View at Google Scholar · View at Scopus
  4. J. A. Inaudi and J. M. Kelly, “Hybrid isolation systems for equipment protection,” Earthquake Engineering and Structural Dynamics, vol. 22, no. 4, pp. 297–313, 1993. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Nagarajaiah, M. A. Riley, and A. Reinhorn, “Control of sliding-isolated bridge with absolute acceleration feedback,” Journal of Engineering Mechanics, vol. 119, no. 11, pp. 2317–2332, 1993. View at Publisher · View at Google Scholar · View at Scopus
  6. J. N. Yang, J. C. Wu, A. M. Reinhorn, and M. Riley, “Control of sliding-isolated buildings using sliding-mode control,” Journal of Structural Engineering, vol. 122, no. 2, pp. 179–186, 1996. View at Publisher · View at Google Scholar · View at Scopus
  7. G. J. Madden, M. D. Symans, and N. Wongprasert, “Experimental verification of seismic response of building frame with adaptive sliding base-isolation system,” Journal of Structural Engineering, vol. 128, no. 8, pp. 1037–1045, 2002. View at Publisher · View at Google Scholar
  8. N. Wongprasert and M. D. Symans, “Experimental evaluation of adaptive elastomeric base-isolated structures using variable-orifice fluid dampers,” Journal of Structural Engineering, vol. 131, no. 6, pp. 867–877, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Narasimhan and S. Nagarajaiah, “A STFT semiactive controller for base isolated buildings with variable stiffness isolation systems,” Engineering Structures, vol. 27, no. 4, pp. 514–523, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Nagarajaiah and S. Sahasrabudhe, “Seismic response control of smart sliding isolated buildings using variable stiffness systems: an experimental and numerical study,” Earthquake Engineering and Structural Dynamics, vol. 35, no. 2, pp. 177–197, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Weber, H. Distl, and C. Braun, “Semi-active base isolation of civil engineering structures based on optimal viscous damping and zero dynamic stiffness,” in Proceedings of the IMAC–XXXV Conference and Exposition on Structural Dynamics, pp. 1–9, Garden Grove, CA, USA, February 2017.
  12. Y. Z. Lin and R. Christenson, “Real-time hybrid test validation of a MR damper controlled building with shake table tests,” Advances in Structural Engineering, vol. 14, no. 1, pp. 79–92, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. S. D. Bharti, S. M. Dumne, and M. K. Shrimali, “Earthquake response of asymmetric building with MR damper,” Earthquake Engineering and Engineering Vibration, vol. 13, no. 2, pp. 305–316, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. B. Erkus and E. A. Johnson, “Dissipativity analysis of the base isolated benchmark structure with magnetorheological fluid dampers,” Smart Materials and Structures, vol. 20, no. 10, p. 105001, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Wang and S. J. Dyke, “Modal-base LQG for smart base isolation system design in seismic response control,” Structural Control and Health Monitoring, vol. 20, no. 5, pp. 753–768, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. B. Chen, Y. Z. Sun, Y. L. Li, and S. L. Zhao, “Control of seismic response of a building frame by using hybrid system with magnetorheological dampers and isolators,” Advances in Structural Engineering, vol. 17, no. 8, pp. 1199–1215, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. H. S. Kim and J. W. Kang, “Multi-objective fuzzy control of smart base isolated spatial structure,” International Journal of Steel Structures, vol. 14, no. 3, pp. 547–556, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Mohebbi and H. Dadkhah, “Multi-objective semi-active base isolation system,” International Journal of Optimization in Civil Engineering, vol. 7, no. 3, pp. 319–338, 2017. View at Google Scholar
  19. J. C. Ramallo, E. A. Johnson, and B. F. Spencer, “Smart base isolation systems,” Journal of Engineering Mechanics, vol. 128, no. 10, pp. 1088–1099, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Sahasrabudhe and S. Nagarajaiah, “Experimental study of sliding base-isolation buildings with magnetorheological dampers in near-fault earthquake,” Journal of Structural Engineering, vol. 131, no. 7, pp. 1025–1034, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. E. A. Johnson, J. C. Ramallo, B. F. Spencer, and M. K. Sain, “Intelligent base isolation systems,” in Proceedings of 2nd World Conference on Structural Control, pp. 367–376, Kyoto, Japan, June 1998.
  22. H. Yoshioka, J. C. Ramallo, and B. F. Spencer, “Smart base isolation strategies employing magnetorheological dampers,” Journal of Engineering Mechanics, vol. 128, no. 5, pp. 540–551, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Mohebbi, H. Dadkhah, and K. Shakeri, “Optimal hybrid base isolation and MR damper,” International Journal of Optimization in Civil Engineering, vol. 5, no. 4, pp. 493–509, 2015. View at Google Scholar
  24. S. F. Ali and A. Ramaswamy, “Hybrid structural control using magnetorheological dampers for base isolated structures,” Smart Materials and Structures, vol. 18, no. 5, p. 055011, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. F. Du, X. Zhu, H. Li, and G. H. Wang, “Collapse simulation of plan irregular isolation structures subjected to near-fault seismic motion,” Applied Mechanics and Materials, vol. 433–435, pp. 2290–2294, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. S. J. Dyke, B. F. Spencer, M. K. Sain, and J. D. Carlson, “Modeling and control of magnetorheological dampers for seismic response reduction,” Smart Materials and Structures, vol. 5, no. 5, pp. 565–575, 1996. View at Publisher · View at Google Scholar · View at Scopus
  27. B. F. Spencer, S. J. Dyke, M. K. Sain, and J. D. Carlson, “Phenomenological model for magnetorheological dampers,” Journal of Engineering Mechanics, vol. 123, no. 3, pp. 230–238, 1997. View at Publisher · View at Google Scholar · View at Scopus
  28. L. M. Jansen and S. J. Dyke, “Semi-active control strategies for MR damper: a comparative study,” Journal of Engineering Mechanics, vol. 126, no. 8, pp. 795–803, 2000. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Mohebbi and A. Joghataie, “Designing optimal tuned mass dampers for nonlinear frames by distributed genetic algorithms,” Structural Design of Tall and Special Buildings, vol. 21, no. 1, pp. 57–76, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. R. Villaverde, Fundamental Concepts of Earthquake Engineering, Taylor and Francis Group, New York, NY, USA,, 2009.
  31. H. Tajimi, “A statistical method of determining the maximum response of a building structure during an earthquake,” in Proceedings of 2nd World Conference in Earthquake Engineering, pp. 781–797, Tokyo, Japan, July 1960.
  32. K. Kanai, “An empirical formula for the spectrum of strong earthquake motions,” in in Bulletin Earthquake Research Institute, vol. 39, pp. 85–95, University of Tokyo, Tokyo, Japan, 1961. View at Google Scholar