Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 8967010, 13 pages
https://doi.org/10.1155/2018/8967010
Research Article

Characteristics of Stress Transfer and Progressive Fracture in Overlying Strata due to Mining-Induced Disturbances

1Geotechnical Engineering Research Center, Institute of Municipal Engineering, Beijing 100037, China
2School of Mechanics and Engineering, Institute of Rock Burst, Liaoning Technical University, Fuxin, Liaoning 123000, China
3Key Laboratory for Mechanics in Fluid Solid Coupling Systems, Institute of Mechanics, Chinese Academy of Sciences, Beijing, China

Correspondence should be addressed to Xiang-feng Lv; moc.361@gnefgnaixvlyjycgzs

Received 6 March 2018; Accepted 10 July 2018; Published 9 August 2018

Academic Editor: Gaofeng Zhao

Copyright © 2018 Xiang-feng Lv et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Tang, J. A. Wang, and L. Wang, “Dynamic laws and characteristics of surface movement induced by mining under thin alluvium,” Rock and Soil Mechanics, vol. 35, no. 10, pp. 2958–2968, 2014. View at Google Scholar
  2. M. G. Qian, P. W. Shi, and J. L. Xv, Mining Pressure and Strata Control, China University of Mining and Technology Press, Xuzhou, China, 2010.
  3. M. G. Qian, X. X. Miao, and J. L. Xu, “Theoretical study of key stratum in ground control,” Journal of China Coal Society, vol. 21, no. 3, pp. 225–230, 1996. View at Google Scholar
  4. X. X. Miao, R. H. Chen, and H. Pu, “Analysis of breakage and collapse of thick key strata around coal face,” Chinese Journal of Rock Mechanics and Engineering, vol. 24, no. 8, pp. 1289–1295, 2005. View at Google Scholar
  5. L. X. Wu, J. Z. Wang, and Y. A. Liu, Coal Strip Mining under Buildings: Theory and Practice, China University of Mining and Technology Press, Xuzhou, China, 1994.
  6. P. A. Cundall, “A computer model for simulating progressive large-scale movements in blocky rock systems,” in Proceedings of the ISRM Symposium on Rock Fracture, pp. 11–18, Nancy, France, 1971.
  7. K. M. O’Connor and C. H. Dowding, “Distinct element modeling and analysis of mining induced subsidence,” Rock Mechanics and Rock Engineering, vol. 25, no. 1, pp. 1–24, 1992. View at Google Scholar
  8. S. H. Li, M. H. Zhao, Y. N. Wang, and Y. Rao, “A new computational model of three-dimensional DEM-block and particle model,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 3, p. 436, 2004. View at Publisher · View at Google Scholar
  9. F. Li, J. A. Wang, P. F. Li, and K. Huang, “Research on movement behavior and failure mechanism of overlying strata caused by mining at mountainous field,” Rock and Soil Mechanics, vol. 37, no. 4, pp. 1089–1095, 2016. View at Google Scholar
  10. L. M. Dou, J. He, and A. Cao, “Rock burst prevention methods based on theory of dynamic and static combined load induced in coal mine,” Journal of China Coal Society, vol. 40, no. 7, pp. 1469–1476, 2015. View at Google Scholar
  11. X. B. Li, S. M. Wang, L. Weng, L. Q. Huang, T. Zhou, and J. Zhou, “Damage constitutive model of different age concretes under impact load,” Journal of Central South University, vol. 22, no. 2, pp. 693–700, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. Z. Q. Yin, X. B. Li, J. F. Jin, X. Q. He, and K. Du, “Failure characteristics of high stress rock induced by impact disturbance under confining pressure unloading,” Transactions of Nonferrous Metals Society of China, vol. 22, no. 1, pp. 175–184, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. M. F. Cai, J. A. Wang, and S. H. Wang, “Analysis on energy distribution and prediction of rock burst during deep mining excavation in Linglong gold mine,” Chinese Journal of Rock Mechanics and Engineering, vol. 20, no. 1, pp. 38–42, 2001. View at Google Scholar
  14. S. C. Li, W. S. Zhu, and W. Z. Chen, “Application of elasto-plastic large displacement finite element method to the study of deformation prediction of soft rock tunnel,” Chinese Journal of Rock Mechanics and Engineering, vol. 21, no. 4, pp. 466–470, 2002. View at Google Scholar
  15. H. W. Song, Y. X. Jia, and Y. Y. Duan, “Study on characteristics of rock broken by excavation and roof supporting object,” Journal of China University of Mining and Technology, vol. 35, no. 2, pp. 192–196, 2006. View at Google Scholar
  16. F. Q. Gong and G. F. Zhao, “Dynamic indirect tensile strength of sandstone under different loading rates,” Rock Mechanics and Rock Engineering, vol. 47, no. 6, pp. 2271–2278, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. P. Wu, Y. G. Yang, and P. S. Xie, “Application of cusp catastrophe theory to research of mine water inrush law from roof,” Coal Science and Technology, vol. 35, no. 3, pp. 37–40, 2007. View at Google Scholar
  18. C. Feng and S. H. Li, “2D particle contact-based meshfree method in CDEM and its application in geotechnical problems,” Engineering Computations, vol. 32, no. 4, pp. 1080–1103, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. Z. S. Ma, C. Feng, T. P. Liu, and S. H. Li, “A GPU accelerated continuous-based discrete element method for elastodynamics analysis,” Advanced Materials Research, vol. 320, pp. 329–34, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. H. C. Hu, Variational Principle of Elasticity and Its Application, Science Press, Beijing, China, 1981.
  21. W. C. Qian, “Variational principles in elasticity with nonliner stress-strain relation,” Applied Mathematics and Mechanics, vol. 8, no. 7, pp. 567–577, 1987. View at Google Scholar
  22. F. Qiu and H. Ding, “Finite element method simulating failure of rock material,” Chinese Journal of Rock Mechanics and Engineering, vol. 26, no. S1, pp. 2663–2668, 2006. View at Google Scholar
  23. R. Q. Huang, “Geo-stress distribution and unloading fracturing mechanism of high rock slopes in western part of China,” Journal of Engineering Geology, vol. 12, pp. 7–13, 2004. View at Google Scholar
  24. F. Q. Wu, T. Liu, X. L. Tang et al., “Research on unloading and zonation of rock mass dam foundation excavation-a case study of Xiaowan hydropower station,” Chinese Journal of Rock Mechanics and Engineering, vol. 28, no. 6, pp. 1091–1098, 2009. View at Google Scholar
  25. D. Huang, Q. Tan, and R. Q. Huang, “Study of micro-mesoscopic characteristics of marble fracture surface and correlation with unloading rock mass strength under high stress and unloading,” Rock and Soil Mechanics, vol. 33, no. S2, pp. 7–15, 2012. View at Google Scholar
  26. X. P. Zhou, Q. H. Qian, and B. H. Zhang, “Zonal disintegration mechanism of deep crack-weakened rock masses under dynamic unloading,” Acta Mechanica Solida Sinica, vol. 22, no. 3, pp. 240–250, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Q. Xie and C. H. He, “Study of the unloading characteristics of a rock mass using the triaxial test and damage mechanics,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. S1, pp. 74–80, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. P. L. Gong, Y. Q. Hu, Y. S. Zhao, and D. Yang, “Three-dimensional simulation study on law of deformation and breakage of coal floor on mining above aquifer,” Chinese Journal of Rock Mechanics and Engineering, vol. 24, no. 23, pp. 4396–4402, 2005. View at Google Scholar
  29. J. W. Wu, H. S. Tong, S. J. Tong, and D. Q. Tang, “Study on similar material for simulation of mining effect of rock mass at fault zone,” Chinese Journal of Rock Mechanics and Engineering, vol. 26, no. S2, pp. 4170–4175, 2007. View at Google Scholar
  30. W. D. Song, J. X. Fu, and D. X. Wang, “Study on physical and numerical simulation of failure laws of wall rock due to transformation from open-pit to underground mining,” Journal of China Coal Society, vol. 37, no. 2, pp. 186–191, 2012. View at Google Scholar
  31. W. M. Cheng, L. L. Sun, G. Wang, and X. C. Huang, “Similar material simulation test of steep-inclined extra-thick coal seam,” Journal of Mining and Safety Engineering, vol. 33, no. 3, pp. 387–392, 2016. View at Google Scholar
  32. J. Xiao, “Selection of similar materials for model test and research on similar material proportioning test,” Beijing Jiaotong University, Beijing, China, 2013, M.S. thesis. View at Google Scholar
  33. B. Orlecka-Sikora, S. Lasocki, G. Lizurek, and L. Rudziński, “Response of seismic activity in mines to the stress changes due to mining induced strong seismic events,” International Journal of Rock Mechanics and Mining Sciences, vol. 53, pp. 151–158, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. A. Sainoki and H. S. Mitri, “Dynamic behavior of mining-induced fault slip,” International Journal of Rock Mechanics and Mining Sciences, vol. 66, pp. 19–29, 2014. View at Publisher · View at Google Scholar · View at Scopus
  35. D. P. Ma, T. X. Wang, and Y. Liu, “An analysis of “space-time” relationship of gob-side entry driving in dynamic pressure area,” Journal of Mining and Safety Engineering, vol. 32, no. 3, pp. 465–470, 2015. View at Google Scholar
  36. CUMT, “Study on stress transmission laws of mining floor and its influence on stability of floor roadway,” China University of Mining and Technology, Xuzhou, China, 2011, M.S. thesis. View at Google Scholar
  37. H. Wang, Y. Jiang, S. Xue et al., “Influence of fault slip on mining-induced pressure and optimization of roadway support design in fault-influenced zone,” Journal of Rock Mechanics and Geotechnical Engineering, vol. 8, no. 5, pp. 660–671, 2016. View at Publisher · View at Google Scholar · View at Scopus