Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 9738038, 18 pages
https://doi.org/10.1155/2018/9738038
Research Article

Characteristics of Wind Load on Spatial Structures with Typical Shapes due to Aerodynamic Geometrical Parameters and Terrain Type

1School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China
2Department of Structural Engineering, Tongji University, Shanghai 200092, China
3Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, China University of Mining and Technology, Xuzhou 221116, China
4Wind Engineering Research Center, Tokyo Polytechnic University, Kanagawa 243-0297, Japan

Correspondence should be addressed to Yuanqi Li; nc.ude.ijgnot@qyil

Received 26 August 2017; Revised 20 November 2017; Accepted 11 December 2017; Published 29 March 2018

Academic Editor: Pier Paolo Rossi

Copyright © 2018 Yi Zhou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Wang, Spatial Organization and Structure. The International Encyclopedia of Geography, John Wiley & Sons, Ltd., Hoboken, NJ, USA, 2017.
  2. J. Wang, J. D. Zhao, T. Lan, J. H. Qian, and T. Song, Development Progress and Future Prospect of Large-Span Spatial Structures, Building Science, Seattle, WA, USA, 2013.
  3. J. Franke, Introduction to the Prediction of Wind Loads on Buildings by Computational Wind Engineering (CWE). Wind Effects on Buildings and Design of Wind-Sensitive Structures, Springer Vienna, Vienna, Austria, 2007.
  4. J. Franke, C. Hirsch, A. G. Jensen et al., “Recommendations on the use of CFD in wind engineering,” in Proceedings of the International Conference on Urban Wind Engineering and Building Aerodynamics, Rhode-Saint-Genèse, Belgium,, May 2004.
  5. S. Kawamura, T. Kiuchi, and T. Mochizuki, “Characteristics of wind pressure acting on spatial large dome,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 42, no. 1–3, pp. 1511-1512, 1992. View at Publisher · View at Google Scholar
  6. J. Blessmann, “Researches on wind effects on domes in Brazil,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 65, no. 1–3, pp. 167–177, 1996. View at Publisher · View at Google Scholar
  7. T. Hongo, M. Suzuki, and M. Tsuchiya, “Experimental study of wind forces on spherical roofs,” Journal of Wind Engineering, vol. 68, pp. 1–14, 1996. View at Publisher · View at Google Scholar
  8. J. Blessmann, “Aerodynamic studies for the Brazilian wind code,” in Proceedings of the 10th Americas Conference on Wind Engineering, pp. 31–70, Baton Rouge, LA, USA, 2005.
  9. Y. Q. Li, Y. Tamura, and Z. Y. Shen, “Wind tunnel tests for wind pressure distribution on spherical shells,” Journal of Building Structures, vol. 26, no. 5, pp. 104–111, 2005. View at Google Scholar
  10. F. H. Li, Z. H. Ni, and S. Z. Shen, “Characteristics of wind pressure on typical roofs under different terrain conditions,” Journal of Building Structures, vol. 28, no. 1, pp. 119–124, 2007. View at Google Scholar
  11. M. J. Paluch, A. M. Loredo-Souza, and J. Blessmann, “Wind loads on attached canopies and their effect on the pressure distribution over arch-roof industrial buildings,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 91, no. 8, pp. 975–994, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. P. A. Blackmore and E. Tsokri, “Wind loads on curved roofs,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 94, no. 11, pp. 833–844, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Q. Li, Y. Tamura, and Z. Y. Shen, “Wind tunnel tests for wind pressure distribution characteristics on cylindrical shells,” Journal of Tongji University, vol. 34, no. 11, pp. 1457–1463, 2006. View at Google Scholar
  14. B. Chen and Q. S. Yang, “Effects of geometrical factors on wind pressure characteristics of cylindrical roofs with wind tunnel tests,” Applied Mechanics and Materials, vol. 351-352, pp. 284–289, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. A. J. Dutt, “Wind pressure distribution on a multiple hyperbolic parabolic shell roof building,” Space Structures, vol. 1, pp. 225–230, 1986. View at Google Scholar
  16. C. Zhao, Q. N. Lu, and S. Z. Shen, “Wind pressure distribution on hyperbolic paraboloid shell roofs,” Journal of Harbin University of Civil Engineering and Architecture, vol. 24, no. 1, pp. 29–36, 1991. View at Google Scholar
  17. Y. Sun, “Characteristics of wind loading on long-span roofs,” Doctoral Dissertation, Harbin Institute of Technology, Harbin, China, 2007. View at Google Scholar
  18. X. Dong and J. H. Ye, “Area-averaged wind pressure on a saddle roof,” Journal of Vibration and Shock, vol. 30, no. 7, pp. 21–30, 2011. View at Google Scholar
  19. M. Liu, X. Chen, and Q. Yang, “Characteristics of dynamic pressures on a saddle type roof in various boundary layer flows,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 150, pp. 1–14, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. F. Li, X. Chen, and M. Gu, “Wind load characteristics and wind induced responses of saddle-shape cable nets roof in different terrains,” in Proceedings of the International Colloquium on Bluff Body Aerodynamics and Applications, Boston, MA, USA, June 2016.
  21. J. G. Zhao and K. M. Lam, “Occurrence of peak lift on a large cantilevered roof,” in Proceedings of the First International Symposium on Wind & Structures for Century, pp. 217–226, Cheju, Korea, January 2000.
  22. J. G. Zhao and K. M. Lam, “Characteristics of wind pressures on large cantilevered roofs: effect of roof inclination,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 90, no. 12–15, pp. 1867–1880, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Katsumura, Y. Tamura, and O. Nakamura, “Universal wind load distribution simultaneously reproducing largest load effects in all subject members on large-span cantilevered roof,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 95, no. 9–11, pp. 1145–1165, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Tominaga, A. Mochida, R. Yoshie et al., “AIJ guidelines for practical applications of cfd to pedestrian wind environment around buildings,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 96, no. 10-11, pp. 1749–1761, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. P. J. Richards, A. D Quinn, and S. Parker, “A 6m cube in an atmosphere boundary layer flow Part 2. Computational solutions,” Wind and Structures, vol. 5, no. 2–4, pp. 177–192, 2002. View at Publisher · View at Google Scholar
  26. Architectural Institute of Japan, Recommendations for Loads on Buildings, Architectural Institute of Japan, Tokyo, Japan, 2004, in Japanese.
  27. GB50009-2012, Load Code for the Design of Building Structures, China Architecture & Building Press, Beijing, China, 2012, in Chinese.
  28. Australian/New Zealand Standard, Structural Design Actions, Part 2: Wind Actions, AS/NZS 1170.2, Standards Australia, Sydney, Australia, 2002.