Comparison of Uplift Capacity and Nonlinear Failure Surfaces of Single-Belled Anchor in Homogeneous and Layered Sand Deposits

Table 3

Detail thickness of sand I (S_I) and sand II (S_II) in layered sand deposit (S_II/S_I) and 3D model and 2D panel and their designations in S_II/S_I.

3D model identifications	2D panel identifications	L	L/Db or L/Ts	LII/L	LI/L	3D anchor designations in SI	2D panel designations in SII/SI
(i)	(ii)	(iii)	(iv)	(v)	(vi)	(vii)	(viii)
3D:45-0.28	2D:45-0.28	276	3	0.39	0.61	3D:45-0.28-3-(0.39SII/0.61SI)	2D:45-0.28-3-(0.39SII/0.61SI)
		368	4	0.54	0.46	3D:45-0.28-4-(0.54SII/0.46SI)	2D:45-0.28-4-(0.54SII/0.46SI)
		460	5	0.63	0.37	3D:45-0.28-5-(0.63SII/0.37SI)	2D:45-0.28-5-(0.63SII/0.37SI)
3D:45-0.33	2D:45-0.33	240	3	0.30	0.70	3D:45-0.33-3-(0.30SII/0.70SI)	2D:45-0.33-3-(0.30SII/0.70SI)
		320	4	0.47	0.53	3D:45-0.33-4-(0.47SII/0.53SI)	2D:45-0.33-4-(0.47SII/0.53SI)
		400	5	0.58	0.42	3D:45-0.33-5-(0.58SII/0.42SI)	2D:45-0.33-5-(0.58SII/0.42SI)
3D:45-0.38	2D:45-0.38	204	3	0.18	0.82	3D:45-0.38-3-(0.18SII/0.82SI)	2D:45-0.38-3-(0.18SII/0.82SI)
		272	4	0.38	0.62	3D:45-0.38-4-(0.38SII/0.62SI)	2D:45-0.38-4-(0.38SII/0.62SI)
		340	5	0.51	0.49	3D:45-0.38-5-(0.51SII/0.49SI)	2D:45-0.38-5-(0.51SII/0.49SI)
3D:45-0.46	2D:45-0.46	168	3	1.00	1.00	3D:45-0.46-3-(SI)	2D:45-0.46-3-(SI)
		224	4	0.25	0.75	3D:45-0.46-4-(0.25SII/0.75SI)	2D:45-0.46-4-(0.25SII/0.75SI)
		280	5	0.40	0.60	3D:45-0.46-5-(0.40SII/0.60SI)	2D:45-0.46-5-(0.40SII/0.60SI)
3D:63-0.28	2D:63-0.28	276	3	0.39	0.61	3D:63-0.28-3-(0.39SII/0.61SI)	2D:63-0.28-3-(0.39SII/0.61SI)
		368	4	0.54	0.46	3D:63-0.28-4-(0.54SII/0.46SI)	2D:63-0.28-4-(0.54SII/0.46SI)
		460	5	0.63	0.37	3D:63-0.28-5-(0.63SII/0.37SI)	2D:63-0.28-5-(0.63SII/0.37SI)
3D:63-0.33	2D:63-0.33	240	3	0.30	0.70	3D:63-0.33-3-(0.30SII/0.70SI)	2D:63-0.33-3-(0.30SII/0.70SI)
		320	4	0.47	0.53	3D:63-0.33-4-(0.47SII/0.53SI)	2D:63-0.33-4-(0.47SII/0.53SI)
		400	5	0.58	0.42	3D:63-0.33-5-(0.58SII/0.42SI)	2D:63-0.33-5-(0.58SII/0.42SI)
3D:63-0.38	2D:63-0.38	204	3	0.18	0.82	3D:63-0.38-3-(0.18SII/0.82SI)	2D:63-0.38-3-(0.18SII/0.82SI)
		272	4	0.38	0.62	3D:63-0.38-4-(0.38SII/0.62SI)	2D:63-0.38-4-(0.38SII/0.62SI)
		340	5	0.51	0.49	3D:63-0.38-5-(0.51SII/0.49SI)	2D:63-0.38-5-(0.51SII/0.49SI)
3D:63-0.46	2D:63-0.46	168	3	1.00	1.00	3D:63-0.46-3-(SI)	2D:63-0.46-3-(SI)
		224	4	0.25	0.75	3D:63-0.46-4-(0.25SII/0.75SI)	2D:63-0.46-4-(0.25SII/0.75SI)
		280	5	0.40	0.60	3D:63-0.46-5-(0.40SII/0.60SI)	2D:63-0.46-5-(0.40SII/0.60SI)
3D:72-0.28	2D:72-0.28	276	3	0.39	0.61	3D:72-0.28-3-(0.39SII/0.61SI)	2D:72-0.28-3-(0.39SII/0.61SI)
		368	4	0.54	0.46	3D:72-0.28-4-(0.54SII/0.46SI)	2D:72-0.28-4-(0.54SII/0.46SI)
		460	5	0.63	0.37	3D:72-0.28-5-(0.63SII/0.37SI)	2D:72-0.28-5-(0.63SII/0.37SI)
3D:72-0.33	2D:72-0.33	240	3	0.30	0.70	3D:72-0.33-3-(0.30SII/0.70SI)	2D:72-0.33-3-(0.30SII/0.70SI)
		320	4	0.47	0.53	3D:72-0.33-4-(0.47SII/0.53SI)	2D:72-0.33-4-(0.47SII/0.53SI)
		400	5	0.58	0.42	3D:72-0.33-5-(0.58SII/0.42SI)	2D:72-0.33-5-(0.58SII/0.42SI)
3D:72-0.38	2D:72-0.38	204	3	0.18	0.82	3D:72-0.38-3-(0.18SII/0.82SI)	2D:72-0.38-3-(0.18SII/0.82SI)
		272	4	0.38	0.62	3D:72-0.38-4-(0.38SII/0.62SI)	2D:72-0.38-4-(0.38SII/0.62SI)
		340	5	0.51	0.49	3D:72-0.38-5-(0.51SII/0.49SI)	2D:72-0.38-5-(0.51SII/0.49SI)
3D:72-0.46	2D:72-0.46	168	3	1.00	1.00	3D:72-0.46-3-(SI)	2D:72-0.46-3-(SI)
		224	4	0.25	0.75	3D:72-0.46-4-(0.25SII/0.75SI)	2D:72-0.46-4-(0.25SII/0.75SI)
		280	5	0.40	0.60	3D:72-0.46-5-(0.40SII/0.60SI)	2D:72-0.46-5-(0.40SII/0.60SI)