PDF
Open Access
Majid Jaraiedi, Richard S. Segall, Venkatramani Rajamohan, "Multi-class decision procedures for the inspection operation", Advances in Decision Sciences, vol. 2, Article ID 987541, 17 pages, 1998. https://doi.org/10.1155/S1173912698000091
Multi-class decision procedures for the inspection operation
Abstract
Increasing the amount of inspection activities and inspecting a large fraction of the items are two approaches that are used to improve products' quality. In this paper, as in a precedent article by Jaraiedi, et al.[5], 100% inspection in combination with multiple-criteria decision (MCD) response is considered. Three different inspection procedures for the multi-stage inspection are presented. Performance of these three procedures are derived and the Average Outgoing Quality (AOQ), Average False Rejected (AFR), and Overall Average Fraction Inspected (SAFI) for all procedures are compared. Two examples are discussed in depth to illustrate numerical comparisons of these procedures.
Copyright
Copyright © 1998 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
