Table of Contents
Advances in Electrical Engineering
Volume 2014, Article ID 216153, 8 pages
http://dx.doi.org/10.1155/2014/216153
Research Article

Active Fault Tolerant Control Based on Bond Graph Approach

1Department of Electrical Engineering, LACS Laboratory, National Engineering School of Tunis, Université de Tunis El Manar, P.O. Box 37, Le Belvedere, 1002 Tunis, Tunisia
2Preparatory Engineering Institute of Tunis 2, Université de Tunis, Rue Jawaher Lel Nahrou-Monfleury, 1089 Tunis, Tunisia

Received 30 April 2014; Revised 21 September 2014; Accepted 21 September 2014; Published 10 November 2014

Academic Editor: Gorazd Stumberger

Copyright © 2014 Manel Allous and Nadia Zanzouri. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Chilin, J. Liu, X. Chen, and P. D. Christofides, “Fault detection and isolation and fault tolerant control of a catalytic alkylation of benzene process,” Chemical Engineering Science, vol. 78, pp. 155–166, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. P. M. Frank, “Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy. A survey and some new results,” Automatica, vol. 26, no. 3, pp. 459–474, 1990. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  3. J. Gertler, “Fault detection and isolation using parity relations,” Control Engineering Practice, vol. 5, no. 5, pp. 653–661, 1997. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Srinivas, “A probabilistic approach to hierarchical model-based diagnosis,” in Proceedings of the 10th Conference on Uncertainty in Artificial Intelligence (UAI '94), pp. 538–545, 1994.
  5. Y. Qian, L. Xu, X. Li, L. Lin, and A. Kraslawski, “LUBRES: an expert system development and implementation for real-time fault diagnosis of a lubricating oil refining process,” Expert Systems with Applications, vol. 35, no. 3, pp. 1252–1266, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Liao, J. L. Wang, and G.-H. Yang, “Reliable robust flight tracking control: an LMI approach,” IEEE Transactions on Control Systems Technology, vol. 10, no. 1, pp. 76–89, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. H. Niemann and J. Stoustrup, “Passive fault tolerant control of a double inverted pendulum—a case study,” Control Engineering Practice, vol. 13, no. 8, pp. 1047–1059, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Mhaskar, “Robust model predictive control design for fault-tolerant control of process systems,” Industrial and Engineering Chemistry Research, vol. 45, no. 25, pp. 8565–8574, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Zhang and W. Chen, “Adaptive output feedback control of nonlinear systems with actuator failures,” Information Sciences, vol. 179, no. 24, pp. 4249–4260, 2009. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  10. R. Loureiro, R. Merzouki, and B. O. Bouamama, “Bond graph model based on structural diagnosability and recoverability analysis: Application to intelligent autonomous vehicles,” IEEE Transactions on Vehicular Technology, vol. 61, no. 3, pp. 986–997, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. H. M. Paynter, Analysis and Design of Engineering Systems, The MIT Press, 1961.
  12. D. Karnopp, D. Margolis, and R. Rosenberg, Systems Dynamics: A Unified Approach, John Wiley and Sons, 1975.
  13. R. Rosenberg and D. C. Karnopp, Introduction to Physical System Dynamics, McGraw-Hill, 1983.
  14. C. Sueur and G. Dauphin-Tanguy, “Bond-graph approach for structural analysis of MIMO linear systems,” Journal of the Franklin Institute, vol. 328, no. 1, pp. 55–70, 1991. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  15. B. Ould-Bouamama, A. K. Samantaray, M. Staroswiecki, and G. Dauphin-Tanguy, “Derivation of constraint relations from bond graph models for fault detection and isolation,” in Proceedings of the International Conference on Bond Graph Modeling and Simulation (ICBGM '03), pp. 104–109, Orlando, Fla, USA, January 2003.
  16. Y. Touati, R. Merzouki, and B. Ould Bouamama, “Robust diagnosis to measurement uncertainties using bond graph approach: application to intelligent autonomous vehicle,” Mechatronics, vol. 22, no. 8, pp. 1148–1160, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Karnopp, “Bond graphs in control: physical state variables and observers,” Journal of the Franklin Institute, vol. 308, no. 3, pp. 219–234, 1979. View at Publisher · View at Google Scholar · View at Scopus
  18. P. J. Gawthrop and L. P. S. Smith, Meta Modelling: Bond Graphs and Dynamic Systems, Prentice Hall, 1995.
  19. C. Pichardo-Almarza, A. Rahmani, G. Dauphin-Tanguy, and M. Delgado, “Bond graph approach to build reduced order observers in linear time invariant systems,” in Proceedings of the 4th International Symposium on Mathematical Modelling, 2003.
  20. C. Pichardo-Almarza, A. Rahmani, G. Dauphin-Tanguy, and M. Delgado, “Proportional-integral observer for systems modelled by bond graphs,” Simulation Modelling Practice and Theory, vol. 13, no. 3, pp. 179–211, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. G. Gonzalez-A and I. Nuñez, “A nonlinear observer of an electrical transformer: a bond graph approach,” World Academy of Science, Engineering and Technology, vol. 58, pp. 814–820, 2009. View at Google Scholar · View at Scopus
  22. P. J. Gawthrop, “Bicausal bond graphs,” in Proceedings of the International Conference on Bond Graph Modelling and Simulation (ICBGM '95), pp. 83–88, 1995.
  23. R. F. Ngwompo, S. Scavarda, and D. Thomasset, “Inversion of linear time-invariant SISO systems modelled by bond graph,” Journal of the Franklin Institute B: Engineering and Applied Mathematics, vol. 333, no. 2, pp. 157–174, 1996. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  24. N. Yadaiah and N. Venkata Ramana, “Linearisation of multi-machine power system: modeling and control—a survey,” International Journal of Electrical Power and Energy Systems, vol. 29, no. 4, pp. 297–311, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. Z. Gao and P. J. Antsaklis, “Stability of the pseudo-inverse method for reconfigurable control systems,” International Journal of Control, vol. 53, no. 3, pp. 717–729, 1991. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  26. M. Staroswiecki, “Fault tolerant control: the pseudo-inverse method revisited,” in Proceedings of the 16th Triennial World Congress of International Federation of Automatic Control (IFAC '05), pp. 418–423, July 2005. View at Scopus
  27. Y. M. Zhang and J. Jiang, “Active fault-tolerant control system against partial actuator failures,” IEE Proceedings on Control Theory and Applications, vol. 149, no. 1, pp. 95–104, 2002. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Guenab, D. Theilliol, P. Weber, J. C. Ponsart, and D. Sauter, “Fault tolerant control method based on cost and reliability analysis,” in Proceedings of the 16th Triennial World Congress of International Federation of Automatic Control (IFAC '05), pp. 490–495, Prague, Czech Republic, July 2005. View at Scopus
  29. Y. Zhang and J. Jiang, “Fault tolerant control system design with explicit consideration of performance degradation,” IEEE Transactions on Aerospace and Electronic Systems, vol. 39, no. 3, pp. 838–848, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. 20 Sim Controllab Products B.V., http://www.20sim.com/.